Phunk's Guide To Huge Meat
 

Copying this from the FI section into it's own thread.

Winning title!! :roflpuke2:

I love me some big meat.....


WOAH

I hesitated about this a second or two before I clicked this link.

Mr. Phunk has some nice meat!

I can see a new license plate in your future: "MEAT LVR"

Checking availability... Please hold :rofl2:

Phunk loves meat and there's nothing but a room full of sausage in this thread.:stirthepot:

I have nothing to add other than the fact that this might be the best title ever. :rofl2:

the ghey is strong in this thread :yum:

We need make this huge meat thread nice and sticky so it stands up above the other tire threads.











Lol mods please sticky

:supergay: :nutswinger: These two icons should never be together on this topic. I decided to take one for the team and post them to help everyone stay away from innuendos such as this.

You're welcome.

This guy clearly wasnt around for the shadoquad erp days the humor of this forum was built on the backside of many a ghey joke.

Sub'd just for the sh!t that should coming out of this thread. :rofl2:

:drama:

I wonder what wheels the rear 350z brembos would fit I assume they are larger but may be a good go between. What is the bias on our cars brakes? I heard talk of rear bias which may work out with the brembos

SUPPOSEDLY if you run the 350z rear brembo's you can fit a 16" z32 turbo, or fd rx7 wheel with a 5mm spacer

My humble opinion on the matter is to just go all the way to 15s and swap when you want to use the meat.

The 2 bolts that hold the caliper to the knuckle are the same. With the wheel off, it is literally 2 bolts to swap, and the 10mm brake hose line. I have found that when switching from the sport brakes to the 350z base brakes, it only took 2 or 3 pumps to bleed the brakes... it was so minor I didnt even have to top off. It was like 5-6 pumps to bleed the sport brakes after swapping back.

For the 20 minutes of work (since the wheels are already off), i would use dedicated brakes for the meats rather than trying to run decent brakes back there that would work with road course use too.

just my take on it. because even with the 28s on 15s, i had to take care to launch and it was taking several practice runs and I destroyed clutch by the time I started to get the 60s down. Although, I was being a little foolish by not lowering the pressure as much as I should until several passes in.

Yup I may start acquiring the parts for this, found some motorsports dry break fittings made for brake systems that would allow a bleedless swap.

That or put some speed bleeders in the calipers.

those have been around since longer than i have... but they used to be really expensive. not sure how much i really trust the less expensive options. bleeding the rear is so quick and easy though that it doesnt really matter even if they do let in a little air.

Why do 28s send a Christmas tree and not 26s?


Sent from my iPhone using Tapatalk

By virtue of being a 28 itself is what causes it. The diameter is too large. The wheel speed sensor system detects it via the decreased axle speed offset relative to the front axle, and it causes a fault. A simple, but not free, way around this would be to increase front tire rolling diameter by an equal proportion.

If there is a 3% or more difference between any tire on the Z. The dash will light up.

Anybody have the specs of the Weld wheels on the first post? I have the specs for 17's.

Those wheels are Billet Specialties. They are 15s. Since the diameter has no effect on width or offset, you can use the same specs as you would for any other diameter wheel.

Ah makes good sense!
So how would I go about making sure the increases are proportional in both front and rear?
Do you go by overall tire diameter or does the wheel size have an effect as well?


Sent from my iPhone using Tapatalk

You have to go by tire height. What's the rear tire specs you want to go with? What do you have on the front now?

I would like to run a 28x10.5-15 non W as that’s the biggest tire most small tire races allow. I currently have nitto invos 285/35-19 in the front.


Sent from my iPhone using Tapatalk

That's about 2.5" difference in height, or 9%. Sticking with a 19" rim. A 245/45-19 is about 27.7" in height, or 1.2%. A 255/45-19 is 28.1" or 0.3%. Both will work.

Thank you. Ideal rim size would be 9” wide or would that be able to fit on 8.5” and save a little weight?


Sent from my iPhone using Tapatalk

The 255 will fit a 9" no problem. A 8.5" rim. I would go with the 245.

Alternatively, get a pair of the sport donut spare wheels, and run a set of 28inch skinnies in the front.

https://www.summitracing.com/parts/H...YaAnKLEALw_wcB

http://blog.stillen.com/wp-content/g...3/DSC_0046.JPG

http://www.the370z.com/members/sirni...e7a47869a.jpeg

M&H front runners
https://www.summitracing.com/int/parts/mnh-mss025

Will a 15x10 wheel with +50mm offset fit the 370z? I can’t locate a set of 15s that are in stock to save my life.....


Sent from my iPhone using Tapatalk

Phunk's Guide To Huge Meat
 

When replacing rotors do you get base 350z or base 370z rotors? I got the base 350z rotors and they don’t clear the hub.
Update: gotta get the 370z base brakes. Duhhhh. Tiny brake gang coming soon


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/202...5c2862b898.jpg
Sitting pretty on 28s


Sent from my iPhone using Tapatalk