Square setup questions?
 

I've been searching for different square setups and I haven't really found what I'm looking for, I want to run 18x10.5 Enkei rpf1 on all 4 corners with equal size tires on all 4. I do not track or race but have the occasional spirited late night drive home, My question is would 18x10.5 plus 15 fit on all four corners with out any issues if not what setup would you guys recommend, Thanks for the help.. :tiphat: :driving:

Hell no won't fit the front.

any suggestions tho, I've seen plus 28 up front but I cant find anyone selling plus 28 rpf1

Dont know how much this will help?

http://www.the370z.com/track-autocro...mm-offset.html

Thank you trips I've snooped on that post before and several like it.
I guess I have to run 18x10.5 plus 28 front and plus 15 rear, Now its just finding a seller with plus 28 I can't seem to find those anywhere...

I ran PF01's 18x10.5 front/rear, with +38 offset front (and a 10mm spacer, so +28) and +15 rear, but it seems like you knew those offsets are necessary already. Good luck!

I've been doing my research for the past couple of months, I've been trying to avoid spacers. Nothing against spacers at all but I just didn't want to go that route but I guess with rpf1 I don't have a choice in the matter since Enkei doesn't make a +28...
Any suggestions on 10mm spacers?

And sorry for slow respond I had to walk my dogs

get the cheapest spacers (Z1's CNC machined spacers) with quality extended lugs (nismo or ARP)

Thanks Chops, I'll look into that a tad bit further I have a bad problem with doing a crap ton of research before buying car parts..

Why are spacers illegal in MA...?

Pennsylvania - spacers thicker than 1/4" are banned (Title 67 of the PA Code)

essentially you cannot use spacers to attain wheel track.