Nissan 370Z Forum - The only 370z that will have these wheels in the US. :)

Page 2 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Wheels & Tires (http://www.the370z.com/wheels-tires/)

- - The only 370z that will have these wheels in the US. :) (http://www.the370z.com/wheels-tires/95301-only-370z-will-have-these-wheels-us.html)

FPenvy

08-22-2014 09:54 AM

Quote:

Originally Posted by Huck (Post 2939216)

get ready to have some camber! I have 9.5/11 +20/+15 and it pokes like a son of a gun with little camber. I finally got them to barely tuck at -2.7 in the front and -2.3 in the back :(

:icon18: this is why you will never beat my 1/4 mile ET ;)

:yum:

Huck	08-22-2014 10:03 AM

Quote:

Originally Posted by Ubetit (Post 2939370)

Isn't that the fitment that Get Your Wheels recommends?

Yes sir it is. It appears they're wrong, at least for as low as i wanted to go. I wanted the top of the tire basically flush woth the bottom of the fender arch. http://img.tapatalk.com/d/14/08/22/2usy6utu.jpg

Quote:

Originally Posted by FPenvy (Post 2939608)

:icon18: this is why you will never beat my 1/4 mile ET ;)

:yum:

Suck it Presto! Going back tonight if it doesn't rain.

Zdayz 2014!!

FPenvy

08-22-2014 10:05 AM

Quote:

Originally Posted by Huck (Post 2939617)

Suck it Presto! Going back tonight if it doesn't rain.

Zdayz 2014!!

i may go too but i was thinking of swapping the exhaust out to see the difference in times with and without at the same track and similar conditions. today is hot and humid more than last time i went though.

but hey good luck with getting close to me. you'll need it :tiphat:

Toasty

08-22-2014 10:06 AM

Quote:

Originally Posted by kenchan (Post 2939606)

exclusivity is cool.

GL fitting the front. :icon17:

I've seen an s2k with a big a brake kit with these and they cleared.

FPenvy

08-22-2014 10:10 AM

Quote:

Originally Posted by Toasty (Post 2939626)

I've seen an s2k with a big a break kit with these and they cleared.

brake*

Toasty

08-22-2014 10:17 AM

Quote:

Originally Posted by FPenvy (Post 2939630)

brake*

Ugh I just woke up gimme a break

FPenvy

08-22-2014 10:39 AM

Quote:

Originally Posted by Toasty (Post 2939639)

Ugh I just woke up gimme a break

well you got break right this time lol :tup:

Toasty

08-22-2014 10:44 AM

Quote:

Originally Posted by FPenvy (Post 2939692)

well you got break right this time lol :tup:

I was hoping you'd see that one haha:tiphat:

kenchan

08-22-2014 11:07 AM

Quote:

Originally Posted by Toasty (Post 2939626)

I've seen an s2k with a big a brake kit with these and they cleared.

oh? you drive a s2k? i didnt know that.

i was talking about the hugearse poke you will have on a 370Z.

never mind then.

nomodsjk

08-22-2014 12:33 PM

Man that's so cool! I'm getting a set of lenso project d spec f and they look identical. I'm even getting them powder coated gloss black to match my car. I'll have pics in a couple weeks

Liquid_G

08-22-2014 01:00 PM

Very nice.

Toasty

08-22-2014 01:19 PM

1 Attachment(s)

Quote:

Originally Posted by kenchan (Post 2939741)

oh? you drive a s2k? i didnt know that.

i was talking about the hugearse poke you will have on a 370Z.

never mind then.

Only a little bit of wheel poke. Heres my buddies 350 with them and no spacers :tip hat:

Now can you stop with the fitment issue argument? Thanks

kornflake7

08-22-2014 01:24 PM

It shouldn't poke I had 9.5+17 fronts and there was no poke at all, its only 1mm more than that up front. If he's running a 245 he will be fine, I'm dropped on teins btw

kenchan

08-22-2014 01:26 PM

Quote:

Originally Posted by Toasty (Post 2939968)

Only a little bit of wheel poke. Heres my buddies 350 with them and no spacers :tip hat:

Now can you stop with the fitment issue argument? Thanks

yah, youve not been reading any of my posts. :icon17:

Toasty

08-22-2014 01:34 PM

Quote:

Originally Posted by kenchan (Post 2939980)

yah, youve not been reading any of my posts. :icon17:

As far as I've seen there's no need since they are filled with arrogance

All times are GMT -5. The time now is 02:20 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page