Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   New Forgestar CF10's (http://www.the370z.com/wheels-tires/94464-new-forgestar-cf10s.html)

cruzthepug 07-30-2014 09:53 AM

New Forgestar CF10's
 
Big thanks to Eric @ Get your Wheels. Forgestar CF10's, 20x9+30 front 20x10.5+20 rear. Wrapped with Michelin Pilot Sport A/S 3's for daily driving. 255/35 front and 285/30 rear. Quick iPhone photo, plan to get some porn shots this weekend.

http://img.tapatalk.com/d/14/07/30/pajygyqa.jpg

God-Speed 07-30-2014 10:21 AM

Very Nice, can't wait to see the pictures you plan on taking!!!:tup::tup:

kenchan 07-30-2014 10:36 AM

good going on the offsets for your stock ride. :D im glad some folks are finally starting
to understand proper offsets for this car at this ride height. probably do ET32-33 for front.

any other pict angles, particulary from the rear/side angle and front side angles?

i suppose cooltoy's car is going to look like that too.

Ubetit 07-30-2014 11:18 AM

That's the offsets I'm looking for. I want my the fronts pushed out 15-18mm in the front and 15mm in the back. I don't want them poking out and I don't want to rub. I'm going to Swifts however

cruzthepug 07-30-2014 11:30 AM

Quote:

Originally Posted by kenchan (Post 2913471)
good going on the offsets for your stock ride. :D im glad some folks are finally starting

to understand proper offsets for this car at this ride height. probably do ET32-33 for front.



any other pict angles, particulary from the rear/side angle and front side angles?



i suppose cooltoy's car is going to look like that too.


http://img.tapatalk.com/d/14/07/31/zu9y2y5y.jpg
http://img.tapatalk.com/d/14/07/31/enytyhu2.jpg
http://img.tapatalk.com/d/14/07/31/myjygeta.jpg

Here's some work parking lot shots

kenchan 07-30-2014 11:35 AM

that's a good fit, congrats :tup:

cruzthepug 07-30-2014 11:39 AM

Quote:

Originally Posted by kenchan (Post 2913527)
that's a good fit, congrats :tup:


Thanks, they sit exactly where I wanted them. I had 20mm spacers all around with the stock Rays and thought the fronts really needed to be about 17. So, that's where we were trying to get when I ordered.

kenchan 07-30-2014 12:36 PM

Quote:

Originally Posted by cruzthepug (Post 2913530)
Thanks, they sit exactly where I wanted them. I had 20mm spacers all around with the stock Rays and thought the fronts really needed to be about 17. So, that's where we were trying to get when I ordered.

:iagree: yah, 20mm on the front is a bit excessive for stock height.

good going again on the offset.

GetYourWheels 07-30-2014 01:43 PM

Looks fantastic! Thanks for the photos and the shout out.
You and Eric did a great job with the offsets!

kenchan 07-30-2014 02:34 PM

maybe wheel shops can finally learn not to sell 350Z/G35C offsets for our Z's like ive been saying for the last 5yrs. :ugh:

cruzthepug 07-31-2014 07:29 AM

One on the way home from work

https://farm3.staticflickr.com/2920/...3f4a272c_c.jpg

kenchan 07-31-2014 07:40 AM

:tup: so wat's next? rear diffuser, mine's rear spoiler lip? :D

cruzthepug 07-31-2014 07:47 AM

Quote:

Originally Posted by kenchan (Post 2914459)
:tup: so wat's next? rear diffuser, mine's rear spoiler lip? :D

Not sure yet, after these wheels and tires AND the new RE-11's I'm having mounted today on my autocross wheels, my mod budget is a little low right now. I'll be looking for a front lip/splitter when some are available for the '14's (besides the couple that are out there now), after that who knows.

kenchan 07-31-2014 07:48 AM

Quote:

Originally Posted by cruzthepug (Post 2914481)
Not sure yet, after these wheels and tires AND the new RE-11's I'm having mounted today on my autocross wheels, my mod budget is a little low right now. I'll be looking for a front lip/splitter when some are available for the '14's (besides the couple that are out there now), after that who knows.

ahh, i c. your car look good as it is.

:tup: on the RE11's. i run those on my nismo wheels. :D

cruzthepug 08-10-2014 08:16 PM

Weather finally cooperated and I was able to get out and get a couple of descent photos today. I installed a set of Project Kics R40 lugs yesterday, really nice.

https://farm4.staticflickr.com/3918/...0bd2b439_c.jpg

https://farm6.staticflickr.com/5584/...39fdb67f_c.jpg

https://farm4.staticflickr.com/3876/...dd70162f_c.jpg

https://farm4.staticflickr.com/3872/...f7fb53eb_z.jpg

kenchan 08-11-2014 09:57 AM

i like it, GJ. :tup:

so did you end up getting new tpms or just went with new metal valves or? :D

cruzthepug 08-11-2014 10:00 AM

Quote:

Originally Posted by kenchan (Post 2926752)
i like it, GJ. :tup:



so did you end up getting new tpms or just went with new metal valves or? :D


Haven't done anything yet, just looking at the light.

cruzthepug 08-17-2014 04:41 AM

Quote:

Originally Posted by kenchan (Post 2926752)
i like it, GJ. :tup:

so did you end up getting new tpms or just went with new metal valves or? :D

Stopped by the dealer yesterday and asked them about the TPMS. They looked up the part numbers and yes, they are different but they didn't know for sure if they would work or not. They said it would cost about $30 for them to try to re-program, so I guess I'll try that to see if that works, if not, I'll just look at the light until next time I need tires.

They had a new GT-R sitting on the floor. The red really looked nice but I hated the "Ivory" interior. In the photo it looks pretty good but it really has more of a orange tint than tan, did not like it at all.

https://farm4.staticflickr.com/3835/...404214df_c.jpg

RogueZ817 08-19-2014 07:31 PM

1 Attachment(s)
Quote:

Originally Posted by cruzthepug (Post 2926351)
Weather finally cooperated and I was able to get out and get a couple of descent photos today. I installed a set of Project Kics R40 lugs yesterday, really nice.

https://farm4.staticflickr.com/3918/...0bd2b439_c.jpg

https://farm6.staticflickr.com/5584/...39fdb67f_c.jpg

https://farm4.staticflickr.com/3876/...dd70162f_c.jpg

https://farm4.staticflickr.com/3872/...f7fb53eb_z.jpg

Love the wheels..and the Ark exhaust :tup:

cruzthepug 08-20-2014 05:37 PM

Quote:

Originally Posted by cruzthepug (Post 2933656)
Stopped by the dealer yesterday and asked them about the TPMS. They looked up the part numbers and yes, they are different but they didn't know for sure if they would work or not. They said it would cost about $30 for them to try to re-program, so I guess I'll try that to see if that works, if not, I'll just look at the light until next time I need tires.

Well, I made an appointment for this afternoon and went to the dealer. Took them about 30 min and they said the were able to re-program the sensors. Light was out and everything was good.......until I was almost home. Then it started flashing and then stayed solid. Got home and checked all the pressures and then started the sync again, got it up to just over 20mph and got the same results as I was getting before, solid light. Got a call into the service dept to see what they say.

cruzthepug 08-22-2014 05:08 PM

Went back by the dealership this afternoon and they tried again. They said they used their handheld unit before and they were going to try to hook it up and go directly to the computer. Long story short, didn't work, but they did refund the $40 they charged me the other day. Now I know for sure.


All times are GMT -5. The time now is 05:46 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2