Opinions Please...
 

Hi everyone!

I am currently looking for some new wheels, have narrowed it down to the 3 attached Enkei SR6, EV5 and Raijin, and wanted to get some opinions... My Z is Black and am looking for a gunmetal color. Buuuuuuut you know how women are and making decisions lol, especially not being able to see them on the car. Just would like some outside input. :confused:

Thanks! :tiphat:

They all look good. Pick the lightest one in an appropriate size.

Im not a fan of Enkei on this car. But if i had to pick out of the 3 sets i would go with Raijin.

really? RPF1's are available in our size if you like tracking. :tup:


out of the 3, i would get the 3rd one (mesh). but i hope those are 19" wheels and are in our offsets. :ugh:
18" mesh are a tad small looking for our cars.

... or, just get factory 19" wheels.

In Houston? Looking for factory Rays? http://www.the370z.com/parts-sale-pr...ires-tpms.html

:tup:



raijin wheel spec chart :ugh:

http://www.enkei.com/size_chart/RAIJIN.pdf

not in our ideal width or offset. these are more for sedans.

Raijin

well, maybe do this if you like raijin... if you have sport brakes, youll need to check clearance.

19x9.5 SQUARE setup
467-995-6515 HS BK ET15 5x114.3 (for your rear)
467-995-6535 HS BK ET35 5x114.3 (for your front)

GL!

Yep. Too narrow. There's no reason to get anything narrower than a 9+" wheel in front, and a 10+" wheel in the back.

Isn't that style also available from other makers on appropriate sizes?

I know they are favored and I do like them on the S2k’s but with all the super concave wheels out/Big Lip/Step lip I’m not really feeling them on the Z.

forgestars i think make that one (Raijin).

2nd one

true, RPF1's are not the best looking wheels. :iagree:

the original forgestars come in 19x9 ET32 range? if stock, the fronts going to stick out too much (poke).

the concave forgestars dont come less conservative than ET25, i dont think. will poke too much on stock setup on the front.

3rd picture!

I am stuck in between number 1 and number 3.
Universal lug holes are not my thing, so I say 3

Have you seen forgestar F14s? If they are still in stock at getyourwheels, there is a vendor here I purchased mine through recently. Other than that its a two month wait

im pretty sure you can get forgestars that wouldnt poke at all on stock setup. ive asked many questions about them and plan on getting a set myself

Opinions Please...
 

There is a link in the sponsor classifieds wheel section by getyourwheels.

Shows f14 on stock suspension....
19x9.5F +20
19x11R +15

See for yourselves ladies