WORK Meister S13P - Black on Black with Gold rivets

http://farm8.staticflickr.com/7445/9...64e58141_b.jpg

I want, I want so freaking bad..

Unfortunately my pockets aren't deep enough.. half off coupons?:roflpuke2:

WORK Meister S13P - Black on Black with Gold rivets http://farm8.staticflickr.com/7445/9...64e58141_b.jpg

those all just look amazing!

quick bump !

What's the wheel specs on the red Nismo in the pictures?

Should be 9.5+17 and 10.5+12

Need to see how flush these wheels with those offsets... Any chance there're pictures straight on from the front an rear? Also what tire sizes should be put on it?

Is Shipping to Singapore straight from japan possible?

Thanks!!

It's very flush. See link below for more pics.

Can't ship directly from Japan. 255/35 front and 305/30 rear tires.

http://www.flickr.com/photos/workwhe...7634616456862/

Thanks!!!
What's the shipping cost like to Singapore?

$400

I'm running Work VSXX 19x10+0 (f) and 19x12+0 (r). The fronts rub without a simple roll and the rears I haven't rubbed once. I'm on coilovers.

Yeah that's pretty aggressive spec. Probably running a lot of cambers ? Stretch tires I assume.

Natural camber. I haven't adjusted the camber at all. I'm running a very mild stretch. The rim is poking out less than half an inch. 370Zs can run some ridiculously wide setups. I'm actually looking to purchase my new wheels with the specs of: 19x10+0 and 19x11.5 -20.

Either SSR Ms3 or the new Work wheels that are apparently in the process of being produced. I'm really aiming for at least 6" lips in the rear, unfortunately SSR MS3s only go to a maximum of 5.2" lip lips.

Did some more research... With that much stagger on the tire sizes, wouldn't that mean it will understeer too much?