Nissan 370Z Forum - Powdercoating 3 piece SSR SP3 wheels

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Wheels & Tires (http://www.the370z.com/wheels-tires/)

- - Powdercoating 3 piece SSR SP3 wheels (http://www.the370z.com/wheels-tires/65773-powdercoating-3-piece-ssr-sp3-wheels.html)

Xplicit97

01-20-2013 12:25 AM

No problem sometimes things get lost in translation

Sent from my SPH-L710 using Tapatalk 2

Mike	01-20-2013 07:58 AM

Quote:

Originally Posted by Xplicit97 (Post 2119682)

Thanks Mike.. So when I re-seal these will it be on the mating surface with some permatex or ultra blue type sealant? Or should I use a silicone based sealant?

Sent from my SPH-L710 using Tapatalk 2

If you are just taking the face off, no sealing required. The inner and outer barrels will be sealed, but the face won't. No need to separate the two halves. You don't even need to take the tires off the rim for doing faces, just deflate them and take out the valvestem core.

Xplicit97

01-20-2013 09:52 AM

Quote:

Originally Posted by Mike (Post 2120764)

Im a little confused on not having to remove the tires, and if I wasnt removing why I would.need to deflate and remove the valve stems thanks for all the help mike

Sent from my SPH-L710 using Tapatalk 2

Mike	01-20-2013 09:46 PM

just to be safe. keep the air pressure from putting excess force on them when the bolts are out. Probably overkill, but its easy to do.

Xplicit97

01-20-2013 10:08 PM

Ah ok thanks I just want sure of the reason.. makes sense.. Well rep when I get to a computer, not sure how on my phone.

Sent from my SPH-L710 using Tapatalk 2

dvo	01-21-2013 01:41 AM

Quote:

Originally Posted by Xplicit97 (Post 2120848)

The valves on 19/20" SP3s are on the outer barrel, might not need to take those out

All times are GMT -5. The time now is 04:29 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page