370z offset
 

here it is.

how would I know if my 20's are going to fit?

Do you currently have them on a Z or G?

What are the sizes and offsets on your 20's?

20's on ur 350z damnnnnn!
lol...
I wanted to get 24's :D

Any idea how well my rims might look with the +22 offset that I have?

I have the 20s on my G35 Coupe. Im not sure what the offset is.

20's will fit on a Z, it has been done already !!!!!!!!!

the GT-R stock 20's fit the new Z, there's a pic around here somewhere

Nah I know it will fit, but Im not sure if the offset of it will fit on there considering the 370 has the bbk and my g35 coupe dosnt

I'm assuming the BBK kit on the Z is the same ones on the G37s, many ppl had problems with fitting old G35 rims on the new G, but that's not to say that all rims will not fit...............

Yea, incase it dosnt fit I will just put them up for sale. I know they would probaly fit the non bbk 370z with no problem. I might need a spacer if anything or if it sticks past the fenders I'll have to get new rims =/

many ppl had the spokes hitting the calipers.
there was this one guy with rims where the spokes cleared the caliper BUT the caliper was rubbing on the top of the rim......LOL.....WTH??...it fits on okay, but the rim would not turn at all....isnt that just bizarre...i couldn't stop laughing at him

We're gonna have to get some stuff test fitted to get a feel for what offset will look better in what sizes....

He might of needed like a 5 mm spacer and he should have been good. if a spacer dosnt help might as well get new rims.

^^ spacers will help to clear the calipers to spokes, i was talking about the caliper to the actual rim or lip or ring or whatever you call it.......lol

O **** lolll. How big were the rims? 17s? lol

18's...the guy needed some winter tires....lol

^ lol yea that was the problem then, no 18s on the g37 or 370

I've fitted a set of 18's on a G37 coupe with the BBK. From what I remember there's barely a finger gap between the outer edge of the caliper and the inner barrel of the wheel. I can imagine a rock getting stuck in there wreaking havoc on the wheel. 18's would work but there's always that chance of that one ******* rock ruining your day.

You mean this Juan?
Z-Car Blog Post Topic 370z With R35 GT-R Wheels at Z Car Garage

^^ exactly buddy !!!

that looks great actually... except idk the specs on GT-R's wheels. i am guessing with 19x10 you can go as bad as et+10. the way to test is using spacers or like ^^ does with GT-R's wheels.

i found out my car's offset by fitting a M5 wheel on it

So what officially are the offsets? I cant see the OP's attachment yet.

For the 18's and 19's.

wow u can put a ET0 on the rears with 10" wide wheels :D

Look's like the 370z will take alot more wheel+offset then the 350z.
We try 20x9.5et22+20x11 et17 and there was still alot more room.
Next set coming from Japan are going to be 20x9.5et11+20x12et11.
:ughdance:

VIP About how much room did you have left over at the 9.5 +22 F and 11 +17 R offset?

thanks,

Mike

updated first post with nismo offsets.

So is this the offsets that i should get for my car?

holy zombie thread batman.

:facepalm:

This chart shows the stock widths/offsets. If you're going to get aftermarket wheels without going up in diameter/going wider/lower offset, you might as well not get new wheels.