Square Vossen VVS CV-3 set up
 

Wondering if anyone on here has done a square set up with the 10.5 +15s or 10.5 +25, and if anyone has pics on the 370. I've seen them on G35 coupes and G37 coupes, just wondering if any Z owners have done this. My current setup is a bit too aggressive for daily driving

Nissan 370Z on VVSCV3 Wheels

I was considering this myself. I'm split between these and Weds SA-55's

the front will be aggressive (equivalent to a 9.5 +13) and the rear will need a spacer to match the front

So would that be with the +15? I want the most concave I can get

it would be with the +25

+15 would be really hard to fit on the fronts without some serious negative camber and stretched tires

If you're into the whole hellaflush thing then go for it. I've done a 18x10 +15 255/40 in the fronts. Switched to a meatier 19x10 +30 275/35 now. Roll the front fenders, shave off that bumper tab, throw some negative camber (mine was -2.2 last time I checked) into the mix and ride on! :tup: Disclaimer: It also depends on your ride height too, forgot to mention that.

I'm realizing the downfalls of "hella flush" currently I'm thinking function is definitely better than form.. I want to keep the performance .. I'm considering getting some body work so I can run an aggressive set up without negative camber.. Not trying to run rubber bands anymore either.. Which means this particular set up may not be feasible or practical anymore for what I want, from what many of you are saying

I ran a 20x10 + 27 with a 275 30 20 tire. Ran OEM camber arms and never rubbed. So its feasable. My setup was concave too and it looked good. Rear was ridiculously concave too though.

What wheels and how concave? Do you have pics you're willing to share?

There are many choices for concave wheels. I'd stay away from his wheel manufacturer.

I know from experience.

Sent from my PG86100 using Tapatalk 2

Oh I'm aware there are many, just wanted to see what they looked like, and I think I know of the manufacturer you're talking bout

This shot really shows the full concave look!


http://www.vossenwheels.com/Gallery/...VVSCV3_c4a.jpg

Looks good guys, hows the camber? Any rubbing issues?

+1, what are the specifics on the camber and tire size for the front????

I've got an open thread for same thing. Trying to sell my +20 and +15 so I can buy new set of +25 and +15.