Help: will the following setup fit???
 

New here. I'm about the purchase the following setup:
19x9.5 +15 front
19x11 +20 rear
Tires:
255/35/19
305/30/19

Will these fit? I always see 19x9.5 +22 for the front and 19x10.5 +12 for the rear. Would my setup be too aggresive and I'll have to run a little stretched tires for these to fit (due to the lower offset)?

Thanks in advance!!

You should be ok with the higher offset in the rear with the 11" wheel. Up front as well with the 255 you shouldn't have any problems, you might need to go a little negative in the front but that's not a big deal. What wheels are you looking at out of curiosity?

Damn I just read your response ^... sorry for the delay...
I'm looking into buy the LC818 Satin Black - Linea Corse from wheeldude

Can I warn you about those Wheels?
YMMV. My .02cents...

I purchased a set of Linea Corse Wheels for my 535i.
They are nice looking and have good offsets.
However, the paint finish is very thin, and chips rather easily.
Also, the wheels I had where not very strong "LM Reps". I hit a pothole and folded one
like a taco. I ended up having them repaired and selling on craigs...

http://i26.photobucket.com/albums/c1...i/IMG_5199.jpg
http://i26.photobucket.com/albums/c1...i/IMG_5196.jpg
http://i26.photobucket.com/albums/c1...i/IMG_5229.jpg

^ thanks a lot!!! I haven't been able to find much feedback regarding these wheels.

Dre_d85

If you like 818 take a look at the Avant Garde M310

19x9.5 +20 and 19x11 +18 hub centric for the Z

http://farm7.staticflickr.com/6098/6...75935ceb_b.jpg
m310-matteblack-370z-side by AvantGardeWheels, on Flickr
http://farm7.staticflickr.com/6042/6...2e57eb92_b.jpg
m310-matteblack-370z-rearside by AvantGardeWheels, on Flickr
http://farm7.staticflickr.com/6058/6...a64aa5a7_b.jpg
m310-matteblack-370z-frontside by AvantGardeWheels, on Flickr

What's the price on those shipped to 33067 ^

Pm on its way.

Bought... thanks Eric

Thank you! Wheels should be shipping today.

Definitely can't go wrong with the m310, my set should be arriving any minute! Thank you to getyourwheels.com!

Awesome!

Why don't they make these sizes machined or some kind of gunmetal, they are all small... I need 19x11s in the back. All I see is 9.5's for those options.