I made sure to focus on the bolts and the lens cap...I should have placed a dollar bill there, for a better sense of how deep the lip really is.

Thank you Josh, no other place I'd rather go for my wheels (4th set in total...God, I'm such a wheel whore :eek: )

So I'm trying to buy SSR GTV03 in Black 19x10.5 with a low offset and I don't even see it listed on the website anymore. I know I've seen some at that width. Does anyone know
if they make it in that size anymore?

Call Josh at Kamispeed. He can help you out.

See here:
https://www.rd-tanabe.com/ssr/wp/wp-...7/12/gtv03.pdf

Got if off the Japanese website for SSR (subsidiary of Tanabe)

How did i miss these. Good looking setup

Wish it were one step more aggressive in offset, its very doable

Dude, nice!!!!!

Which wheels are these SP3?

The ones recently posted are the SSR SP1. The SSR SP3 is discontinued.

Thank you!

I didn't go more aggressive so that I wouldn't have to roll or pull the fenders or have to add camber to the wheels.

So far, at stock height, no rubs or anything (carrying a passenger, plus I'm a fluffy dude). Maybe in the future if I do decide to lower it, I'll have to add some camber, but I'm happy for now (till I feel the itch for another set of wheels, oh no!).

Just about ready to order my wheels. Will the factory TPMS sensors work with SSR wheels? Or Will I need to source some aftermarket?

They should work, but ask your dealer if it’s possible to request that SSR drill the air valve holes to accept TPMS sensors/standard schrader valves .

I forgot to even ask and the holes were slightly smaller (but the perfect size for the included valves that SSR provides). I had to order a TPMS band kit and strap the sensors to the wheels barrels.

So just ask to see if SSR can do that or if not, take your wheels to a machine shop (or someone with a good drill press/rig that can handle the job).

Oh and if you haven’t selected your authorized dealer, I suggest Josh over at Kami Speed! He’s taken care of me on 5 sets of wheels throughout the years (I need help, lol).

I've spoken with Josh a few times and the actual offset that I wanted they don't carry anymore so I had to get my rear wheels from somewhere else.

I do plan on getting at least the fronts from kamispeed though. So the factory tpms will work then despite being smaller? I'm a bit unfamiliar with the band kit you're talking about :tiphat:

You’ll need to get all of the wheels drilled out, unless SSR offers that directly from the factory as an option.

The TPMS sensors will not fit if you don’t drill out the holes...the standard Schrader valve is just a little too wide to fit. Here’s the band kit that I got from Amazon to give you a better idea of what I’m talking about. White Knight TPMS22105 Stainless Steel Finish TPMS Strap Kit, (Set of 4) https://www.amazon.com/dp/B00B2FCQ86..._n-XfCb1K7N1HP

Hopefully though, if SSR can drill them to the Schrader valve/TPMS diameter, you can avoid all of that.

Hope that helps!

I see. Since the wheels are already here in the states I don't see that being possible unless I send them back to SSR. I'll go ahead and grab that band kit though. Thanks for the help!