Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   Wheel Offset Discussion Thread... How far can we go? (http://www.the370z.com/wheels-tires/3636-wheel-offset-discussion-thread-how-far-can-we-go.html)

djpathfinder 03-17-2011 11:05 AM

Looks good, what tire sizes are you running?

Waqar 03-19-2011 04:18 AM

Quote:

Originally Posted by djpathfinder (Post 992655)
looks good, what tire sizes are you running?

275/35/18
295/35/18

ND370z 03-22-2011 02:42 PM

how about a deep dish concave step lip? anyone have that ?

MUST 03-23-2011 04:12 AM

Quote:

Originally Posted by ND370z (Post 1002644)
how about a deep dish concave step lip? anyone have that ?

been looking for the same thing, this is what i found so far...

Ron 03-23-2011 11:36 PM

Dropped on swift springs, car is daily driven. What can you tell me about this:

front: 19x9.5 +22 on 245/40s
rear: 19x10.5 +12 on 285/35s


Edit: After thinking about it, I figured that the setup I want would be the equivalent of adding 18mm front/11mm rear spacers to the stock nismo wheels, so I guess I will be ok up front since there are people here running 20mm spacers on the front with nismo wheels and tires....for the rears I guess I could add 5mm+2.5mm spacers to bring the offset down to +4.5 (same thing as adding 18.5mm spacer to rear nismo wheels, again, I've seen people here running 20mm spacers back there.)

what do you think? do you think camber will be too bad for a daily driver? Do I have all my calcs wrong? lol

-370Z- 04-04-2011 08:22 AM

Anyone have any idea how much room we got up front as far as suspension clearance goes?

theART 04-14-2011 04:48 PM

Any idea if 19x9.5+17 on the 245/40/19 Fronts with stock springs IS TOO AGGRESSIVE and going to eat the fender?

ArtK 05-20-2011 04:12 PM

Couple of quick questions, (I'm sure my answers are in this post somewhere, so let me apologize upfront if I'm being redundant!)
1. If I am getting a 20x11 wheel and want 315/25/20 tires and want them to be able to tuck what range offset should I get?

2. Same question for the front with a 20x9.5 wheel and either 255 or 265/30/20 tire?

Thanks for the info, Trial and error is too expensive!!

ArtK 05-20-2011 04:14 PM

Couple of quick questions, (I'm sure my answers are in this post somewhere, so let me apologize upfront if I'm being redundant!)
1. If I am getting a 20x11 wheel and want 315/25/20 tires and want them to be able to tuck what range offset should I get?

2. Same question for the front with a 20x9.5 wheel and either 255 or 265/30/20 tire?

Thanks for the info, Trial and error is too expensive!!

ArtK 05-20-2011 04:16 PM

Sorry for the double post. Damn Droid, can't wait for the next iPhone!!

ArtK 05-21-2011 08:39 AM

Has anyone put a 265/30/20 tire on a 9.5 wheel using an offset in the +12 to +18 range?
I am wondering if it will rub on anything or if I should do a 255/30/20...I don't want to go to narrow in the front because I am doing a 315 rear tire on an 11mm wheel.
Any thoughts.............

One_Quick_Z 06-16-2011 04:18 AM

Thread revive!



How about +15 front and rear anyone have this yet?





DAN

daisuke149 06-17-2011 09:15 AM

Quote:

Originally Posted by One_Quick_Z (Post 1172293)
Thread revive!



How about +15 front and rear anyone have this yet?





DAN

you could run a +15 .. depends on what width you want.

a 10" wide +15 would required a serious drop and/or camber for the front and the rear would need a spacer if it was 10" + 15. but if it was a 8" wheel, it would fit fine up front and require a massssive spacer in the rear.

OMGWTFBBQ 06-17-2011 12:37 PM

Quote:

Originally Posted by One_Quick_Z (Post 1172293)
Thread revive!



How about +15 front and rear anyone have this yet?





DAN

I'm running 18x10 +15 255/40/18 all around with a 30mm spacer in the rear. -2.3 front camber and -2.0 rear camber. Lowered pretty aggressively on KW V3's. Front fenders are slightly pulled, fender liners trimmed, bumper tab relocated. No issues here. :tup:

One_Quick_Z 06-22-2011 10:58 AM

I am already on Stance Coils with a mild drop, I was really hoping not to get spacers Im just not a fan wheel specs are 19/9.5/10.5 +15 front and rear......Dont really care if it has a little tuck or even just a little poke.....I plan on 255 30's up front and 305 30's in the rear...



DAN


All times are GMT -5. The time now is 09:37 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2