AZ's TSW Nurburgrings are mounted!!!! Pics
I could not be happier! Here are the pics I promised.
AZ http://www.the370z.com/members/azroa...ounted-001.jpg http://www.the370z.com/members/azroa...ounted-002.jpg http://www.the370z.com/members/azroa...ounted-003.jpg http://www.the370z.com/members/azroa...ounted-004.jpg http://www.the370z.com/members/azroa...ounted-005.jpg |
WOW AZ, JUST WOW. I gotta tell you I knew they were gonna look good, but this is way better then I thought. I mean like boat loads better. You hit it on the nail with the finish man, I was skeptical I will admit the truth, but you are a man of vision.
Were you able to check clearances without the spacers, not that it matters b/c this will open options now for guys with the 19" stockers and spacers to be able to keep the spacers and run something different. |
Thanks, Chris. I couldn't have done it without ya! :tup: There are tons of space even without the spacers. Seriously, there is well over an inch of space between the caliper and the wheels so you would end up with about 3/4" clearance without the spacers. Trust me - it will not be a problem.
I am seriously pumped at the way they turned out. :excited: It looks like the ultimate combination of a "black" wheel and one that is polished or chromed. From an angle you can really see the darker sections against the mirror finish. Now am I no longer banned? AZ |
Holy moly, that car is begging to be lowered now. The TSWs look great, congrats!
|
Wow, those came out great. Awesome job you two. Post some more angle shots i want to see the flushness!
|
Not a problem AZ, glad everything turned out wheel. We chose a great setup and good matching fitments with the spacers. I tell you I must say that 19" is so perfect for the car. I knew it, man I am good, I think 20" will look to big b/c of the design of the wheels. We did good AZ, ok whos next guys, chop chop its time to make TSW happy haha.
|
hahah i thought those were 20's! you were right, that style made them look bigger
|
it looks great on your car, just lower it ;)
i love the profile shots, not sure about other angles, I wish the wheels had more concavity to them. |
nice! drop, drop, drop! :)
|
is that a viper in your garage?
|
hey congrats! :tup:
|
My pants just got tight.
|
Quote:
|
If he were dropped, they would tuck in more, but it is an aggressive setup. It would seriously look perfect with a drop and the offsets that the spacers created. Talk about a good finished product, I am still like surprised how light they are for the money.
|
drop and your set...
Interesting pin-striping also...I kinda like it under the side windows |
Thanks to everyone for the positive comments. Lowering is next on my list - next month if the funds permit. I will probably go with Eibach springs. I don't want to go too aggresive since I am scraping in places now.
That is my wife's "94 Miata in the garage. I traded my '04 Mazdaspeed Miata on the Z. I have owned 3 Miatas and loved them. The Z blows the Miata away when you compare power even to the turbocharged and modified MS Miata, but few cars, including the Z can outhandle a well set up Miata. And the Miata doors are legendary!;) AZ |
Quote:
~1" drop would be nice. |
AZ- so you're running this setup right now (from the other thread)?
"19x9.5 with +41 offset and 19x10.5 with +27 offset. I am running 15mm H&R spacers up front and 20mm in the rear." So you're at +26 front +7 rear? instead of lowering it, how about this? swap out the front spacers to 10mm (ET36) and 10mm for rear (ET17). this will make the wheels fit better without lowering. as you probably already know, lowering a car introduces all sorts of other issues so you need to be committed in following through with a lot of misc crappage. :D GL with watever you decide! :) |
Honestly, the front I would def not change. We are running +22-+25 on 9.5" each wheels on the Z and it is coming out perfect when you lower the car. THe offset in the rear is considered aggressive, but when he lowers it you will see how perfect it will look. I can only tell you guys perfection. I now have your car on my desktop, to show me that TSW has truly stepped up their game.
|
obviously if you're going to lower the car things change dramatically (literally on this car with its neg camber).
i was speaking from the perspective if he was to KEEP stock height. |
Looking good.
A drop and you're golden. |
wheels are looking good AZ!
|
All times are GMT -5. The time now is 04:39 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2