Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   The "Will it fit?" thread (http://www.the370z.com/wheels-tires/17683-will-fit-thread.html)

paulo_370z 08-04-2015 10:56 AM

hey guys sorry im a bit new to this forum but im looking to buy some wheels and i was wondering if anyone knows what this set up would look like. I plan on buying some varrstoen es1 or es2

Im currently on swift springs with factory camber spec
19x10.5 +12 front
19x10.5 +12 rear

I have the sports package and want to use the stock tires on these rims. My question is will this set up run flush with my fenders. My goal is to sit flush with no spacers needed and not sticking out. Any input or advice will greatly be appreciated. Sorry if this is a stupid question

jchammond 08-04-2015 01:08 PM

Quote:

Originally Posted by paulo_370z (Post 3275692)
hey guys sorry im a bit new to this forum but im looking to buy some wheels and i was wondering if anyone knows what this set up would look like. I plan on buying some varrstoen es1

Im currently on swift springs
19x10.5 +12 front
19x10.5 +12 rear

I have the sports package and want to use the stock tires on these rims. My question is will this set up run flush with my fenders. My goal is to sit flush with no spacers needed and not sticking out. Any input or advice will greatly be appreciated. Sorry if this is a stupid question


Do you currently have the 19x9 +47 & 19x10 +30 ?


Sent from my iPhone using Tapatalk

paulo_370z 08-04-2015 01:34 PM

Quote:

Originally Posted by jchammond (Post 3275877)
Do you currently have the 19x9 +47 & 19x10 +30 ?


Sent from my iPhone using Tapatalk

yes i do

jchammond 08-04-2015 01:35 PM

Quote:

Originally Posted by jchammond (Post 3275877)
Do you currently have the 19x9 +47 & 19x10 +30 ?


Sent from my iPhone using Tapatalk

if you're running 19x9+47F & 19x10+30R,,,my calculations are (+2.11" front spacing on F & +0.89" front spacing on R) meaning that the rim lip on front could be up to 1" outside fender & the rear .25" out.....all depends on your camber adjustments///take 2 yard sticks and put one sideways at top of rim lip & touch against both sides of fender & take other one & measure gap to rim lip.
not saying that they won't work with factory tires-because you will definitely have the front one's stretched.
do the same in rear.
Factory Specs are (+43 18x8,+15 18x9) (+47 19x9,+30 19x10) (+40 19x9.5,+23 19x10.5)
hope this helps....rear would have a lot better chance than front.

jchammond 08-04-2015 01:53 PM

Quote:

Originally Posted by jchammond (Post 3275914)
if you're running 19x9+47F & 19x10+30R,,,my calculations are (+2.11" front spacing on F & +0.89" front spacing on R) meaning that the rim lip on front could be up to 1" outside fender & the rear .25" out.....all depends on your camber adjustments///take 2 yard sticks and put one sideways at top of rim lip & touch against both sides of fender & take other one & measure gap to rim lip.
not saying that they won't work with factory tires-because you will definitely have the front one's stretched.
do the same in rear.
Factory Specs are (+43 18x8,+15 18x9) (+47 19x9,+30 19x10) (+40 19x9.5,+23 19x10.5)
hope this helps....rear would have a lot better chance than front.

The +2.11" & +0.89" is how much the wheel will come out further than what is stock...the backspacing on the 10.5wide wheel is 6.25",,,that is good.

paulo_370z 08-04-2015 02:07 PM

Quote:

Originally Posted by jchammond (Post 3275914)
if you're running 19x9+47F & 19x10+30R,,,my calculations are (+2.11" front spacing on F & +0.89" front spacing on R) meaning that the rim lip on front could be up to 1" outside fender & the rear .25" out.....all depends on your camber adjustments///take 2 yard sticks and put one sideways at top of rim lip & touch against both sides of fender & take other one & measure gap to rim lip.
not saying that they won't work with factory tires-because you will definitely have the front one's stretched.
do the same in rear.
Factory Specs are (+43 18x8,+15 18x9) (+47 19x9,+30 19x10) (+40 19x9.5,+23 19x10.5)
hope this helps....rear would have a lot better chance than front.

thank you that does help after reading this i think i will be going with
19x9.5 +12
19x 10.5 + 12
what do you think? will that be better and sit flush with no poking?

jchammond 08-04-2015 02:31 PM

Quote:

Originally Posted by paulo_370z (Post 3275955)
thank you that does help after reading this i think i will be going with
19x9.5 +12
19x 10.5 + 12
what do you think? will that be better and sit flush with no poking?

still @ +1.61" out on rim,,,a more common front 9.5 is +25-which is +1.11 out further on rim...Hopefully a few other members will chime in-don't want to steer you wrong.

go to the (370z MEATY TIRE THREAD) this will give you lots of ideas.

jchammond 08-04-2015 07:38 PM

Quote:

Originally Posted by jchammond (Post 3275970)
still @ +1.61" out on rim,,,a more common front 9.5 is +25-which is +1.11 out further on rim...Hopefully a few other members will chime in-don't want to steer you wrong.

go to the (370z MEATY TIRE THREAD) this will give you lots of ideas.

Ok Fellow Forum Member's,,,i know some of you guy's are running aggressive offset wheels on your ~Z's~ & new member is trying to do a one shot one kill on offsets for flush mount-without spacers......i know camber plays a HUGE role in this....so give it a look-he want's to use stock sized tires,,,(i'm guessing 245/40,275,285/35/19's) initially wanted to use stock tires on 19x10.5+12 on all 4 corners.
thank you for the help.

ZeeJay 08-05-2015 12:43 AM

Currently running the OEM stock rims for a 2009 Touring w/o Sport, but I'm looking to buy my baby some new wheels and probably new tires to go with them.

Konig Illusion

-Rim Diameter 18 inches
-Rim Width 8 inches
-Bolt Pattern (Number of Holes) 5
-Bolt Pattern (Pitch Circle Diameter) 114.3 millimeters
-Offset 45 millimeters
-Backspace 6.27 inches
-Bore Diameter 73.10 millimeters

And I would like to know if I could get some Potenza S04s to fit these
Front- 225/50R18 95Y
Back- 245/45R18 96Y


Also, was wondering if I would have a problem fitting Brembo brake calipers under these wheels, planning on matching the blue accent.

Would they fit without a new tune and/or spacers? I'm not that educated in wheel/tire knowledge.

jchammond 08-05-2015 01:41 AM

Quote:

Originally Posted by ZeeJay (Post 3276451)
Currently running the OEM stock rims for a 2009 Touring w/o Sport, but I'm looking to buy my baby some new wheels and probably new tires to go with them.

Konig Illusion

-Rim Diameter 18 inches
-Rim Width 8 inches
-Bolt Pattern (Number of Holes) 5
-Bolt Pattern (Pitch Circle Diameter) 114.3 millimeters
-Offset 45 millimeters
-Backspace 6.27 inches
-Bore Diameter 73.10 millimeters

And I would like to know if I could get some Potenza S04s to fit these
Front- 225/50R18 95Y
Back- 245/45R18 96Y


Also, was wondering if I would have a problem fitting Brembo brake calipers under these wheels, planning on matching the blue accent.

Would they fit without a new tune and/or spacers? I'm not that educated in wheel/tire knowledge.

i have an 11' base touring w/factory 18's also....they are 18x8+43,18x9+15 , you mentioned the stock size tire;which is 26.8F & 26.7R,,,,i kept my factory wheels and put 245/45's on front & 275/40's on rear...both 26.7" diameter...the front wheels could probably stand a 20 0r 25mm spacer to flush it & 15mm rear(on mine) i have my rear camber maxxed out with factory eccentric bolts (-1.75*) as far as brembo brakes-that depends on how big you want to go/that is why the sport & nismo's come w/19" wheels.....Brembo may offer some calipers to fit the 18's
initial question about wheels...there are bunches of flavors out there for these cars-just pick your poison.
BigWheels.Net: custom wheels,chrome wheels,black wheels,custom rims,american racing wheels,classic muscle car wheels,truck wheels and tires. is a good starting point.

jchammond 08-05-2015 02:28 AM

2 Attachment(s)
Quote:

Originally Posted by paulo_370z (Post 3275692)
hey guys sorry im a bit new to this forum but im looking to buy some wheels and i was wondering if anyone knows what this set up would look like. I plan on buying some varrstoen es1 or es2

Im currently on swift springs with factory camber spec
19x10.5 +12 front
19x10.5 +12 rear

I have the sports package and want to use the stock tires on these rims. My question is will this set up run flush with my fenders. My goal is to sit flush with no spacers needed and not sticking out. Any input or advice will greatly be appreciated. Sorry if this is a stupid question


Check out Gale Forces Build: could give you ideas on offsetsAttachment 106394Attachment 106395


Sent from my iPhone using Tapatalk

jchammond 08-05-2015 02:30 AM

Gale's Build
 
Quote:

Originally Posted by jchammond (Post 3276464)
Check out Gale Forces Build: could give you ideas on offsetsAttachment 106394Attachment 106395


Sent from my iPhone using Tapatalk

He shouldn't mind,,,bad to the bone ~Z~

jchammond 08-05-2015 02:33 AM

1 Attachment(s)
Or "Mr Rusty"Attachment 106396
Supersize in rear,
19x9.5 +25F 275/35/19 & 19x12R +28 345/30/19 MPSS tires.
Also Bad AZZ!


Sent from my iPhone using Tapatalk

Spooler 08-07-2015 12:50 PM

This thread title is full of Fail. I got asked many times, "Will it Fit?". Everytime I see it I just chuckle.

jchammond 08-07-2015 07:14 PM

Quote:

Originally Posted by Spooler (Post 3124265)
I have no idea why they didn't put 265/25r19's on the front of a Nismo stock. The car has a ton more grip in the front with them.


I see this is your last comment Mr Spooler; maybe everyone doesn't have the same taste as you....I thought this site was intended to help one another & not be a hater- but maybe I'm either wrong or you are way more smarter than the rest of us.


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 05:09 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2