![]() |
Makes sense at that camber setting
|
Sup fellas:tiphat: just recently bought me some wheels:tup:
just wanted to know if this set of tires would fit. which options do you think it's better? this is my offset... 20x9.5 +15 F 20x11 +10 R 255-35 F 285-30 R Any suggestions would be appreciated:tiphat: |
Looks ok.
The rear tire will have a tad stretch to it. THe Avant Garde M310 are 19x9.5 +20 with the 255 are dead on so 5mm out shouldn't be a problem. The 11 + 10 sounds ok as well. |
you should run a 305 or at least a 295 in the rear. Dont need to go smaller unless you lik the stretch look.
|
aggressive or stretched
I know this is probably a dumb question but I am confused as to the two terms used for the wheel fitment.. Does aggressive mean the tires sit more to the outside of the car? Or is that the difinition for stretched?
Next question:: I have 20x8.5 with 40 offset with 255/35 and 20x10 with a 35 offset & 285/30. HELO 834's... but they sit too far in on the rears. The fronts look fine. I want the wheels to sit out to the edge of the car body and not rub. I dont want to do any other mods except spacers right now. If I go 25mm in the back will that be the right setup without rubbing?? thank you for your help... |
Quote:
You might have a little big of a hard time tucking the tire with that 11' +10. |
I have 19x10 and19x11 with 0 offset all around. Would 285/35/19 and 305/30/19 work with swift springs?
|
Quote:
|
Quote:
Quote:
Quote:
I was just hoping it might make a difference on road noise and roughness. plus it's a lil cheaper =) |
Quote:
|
Quote:
Mike |
Wheel: MSR Wheels - Style 044 (MSR Wheels - Style 044)
Size: 18x8 Pattern: 5 on 4.5 Offset: +42mm Do any of you guys know if this will fit? |
Quote:
|
Quote:
those are gonna be really really ticked in. If you have sports id venture they willd efinitely not clear the akebono's. if you dont have sport i still dont know if they will clear the base brakes. Why would you go with such a tiny wheel? |
somebody selling these cheap on craiglist..I've never bought rims before i dont know where to start haha
|
All times are GMT -5. The time now is 12:40 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2