Nissan 370Z Forum - Wheel Help. 350z to 370z can't remember my offsets.

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Wheels & Tires (http://www.the370z.com/wheels-tires/)

- - Wheel Help. 350z to 370z can't remember my offsets. (http://www.the370z.com/wheels-tires/13996-wheel-help-350z-370z-cant-remember-my-offsets.html)

Mike	02-13-2010 09:06 AM

Quote:

Originally Posted by Demon Z (Post 400019)

I'm in the same boat as the OP, but my 19x9.5 and 10.5s are +22 all around (and I'm gonna put them on my 370 as well). Since we all have the same hubs, wouldn't it make sense to determine the max offset and do the math from there, assuming a stock suspension? Or are there factors here I'm missing?

No thats about it. Figure the max is roughly +20mm greater than stock in front and 25 in the rear, then go from there.

laze1

02-13-2010 10:12 AM

Using any spacer over 5 MM will require longer studs to be safe...

OMGWTFBBQ

02-13-2010 11:17 AM

Quote:

Originally Posted by Demon Z (Post 400019)

Personally, I don't think you'll have a problem with 19x9.5 19x10.5 +22 all around. It still looks amazing. Take a look at DannyGT's car. This is perfect stance in my opinion. :postwhore:

http://www.kryptonik.org/therex/The%20Z/13.JPG

DannyGT, let me know if you want this picture taken down.

Demon Z

02-13-2010 02:55 PM

Cool cool....thanx everyone. It's not that I'm trying to see how many sheets of paper I can fit between my fender and tire, it's just that if you're going with aftermarket wheels, you probably want a flush look. Thanx again!

CrownR426

02-13-2010 03:06 PM

What are the positives of using a spacer when compared to not using one?
Aren't they just for looks?
And aren't they actually bad for performance?

All times are GMT -5. The time now is 09:28 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page