Congrats to you too my man! I'ts always exciting....Im on my 3rd set of wheels in the past year only. This time I was like screw it, Im going aggressive and never looking back! now the fun part....lol

Work Meisters S1 3P
 

I have a 19x10.5 +17 (83mm lip) front and 19x11.5 +3 (130mm lip) rear. TX disk and A disk, respectively. Believe it or not, when you order through an authorized dealer, they need to order a “TX” disk to clear the wide front Akebonos. Work takes the Tdisk (biggest brake clearance) and machines the inside to clear our brakes. I have 255/35 and 275/35 Federal RSPROS which are notorious for running super wide and are effectively a 275/295.

Stock camber at -2.7 front/ -3.0 rear

https://uploads.tapatalk-cdn.com/202...bdb7cde908.jpghttps://uploads.tapatalk-cdn.com/202...49c275f3b9.jpg

With a “normal” 255/35 up front, you can run super low without modding your fender. Like this:
https://uploads.tapatalk-cdn.com/202...8e5dd43ba3.jpg

Hope this helps!

You are a godsend! Thank you
These are the exact same specs, respectively

Wow thank you thank you thank you now I know exactly how it’ll sit

Now I’m worried about the tx face cause they didn’t say anything about that to me, Chris with vivid first wrote to them and they emailed back saying to get t face and a face

No worries brother.

I’m sure Work will provide you with the correct disk, assuming they know your car is a 370z with Akebonos.

Let me know if you need help with anything else.

Call vivid and make sure
Do not assume
These are not cheap, make sure they get it right

I called and made sure, and he told me he first emailed them and these are the faces that they confirmed fit, they put them on a red nismo ...also pure_q50 let me know the t face will clear the front brakes.....by like 2mm. I'm still worried tho

I just emailed work....lets see

Ugh I hope so....Option zero got in my head:confused:

I hope I can stuff some 275/35's and some 315/30's in there

okay guys they confirmed the tx face, thank you! really appreciate all of the help!

Can't remember if my fronts are TX disk. It rings a bell but my wheels have (T) stamped on them. Running 19.0"x10.0" +24 and 19.0"x11.0" +10 (A) with 265/35 and 305/30 Michelin PS4S. Front clearance is tight but it fits.

https://i.imgur.com/jVmp69C.jpg

https://i.imgur.com/l5d9xuL.jpg

https://i.imgur.com/5mDNj7f.jpg

https://i.imgur.com/QC2KxYX.jpg

WOW .... drooling atm

sheet maybe i went to aggressive.. great

apparently tx face is just for works reference...and its for them to know its an akebono face. After 2013 work released that face for bbk's and the akebonos were on the list

It doesn’t look like that white car has had any adjustable components. His specs aren’t aggressive

phew...I dont want to run more than -3 in the front, and not much more in the rear. Maybe -3.5. But I also want alot of tire...

I was thinking 265/35 and 305/30 like you suggested...but the thing is I kept my flares on so even with rolling I still have less clearance :(

ditch the flares. the way the clip on impedes clearance
roll your fenders
relocate front bumper tab or shave it down
problem solved

https://farm6.staticflickr.com/5531/...6ebe7544_c.jpg

19x10-2 and 19x11-7
clears BBK
with tires
225/35 and 235/35

owner: CarbonFZ

pretty sure at the time of that photo he was static and DID NOT have SPL arms

His back looks lower than the front. That would drive me bonkers. That is almost exactly how my car sat on those ark gts lowering springs.