Yes, I did get them from Z1 and I stuck with the standard Nismo sizes 19x9.5, 19x10.5. The front offset is minus 1 mm from stock and the rears are minus 5 mm different. They are, if I recall correctly, about 15 lbs lighter than the OEM wheels.

Yeah, I checked Z1 and looks like they dont have the size to go flush without spacers. I always wanted to do that..

Mind sharing how much you spent in total for this setup?

Wheels, center caps, two 5mm spacers, extended studs and a set of Nismo lugs was about $2650 with shipping.

Wheels look great Whiskey, mind posting your offsets and tires so others have an exact reference?

Would also love to see more pics, they look very similar to my LMGT4's!

Lastly, I would align your center caps with the NISMO logo, they are supposed to be parallel

bump on this...

I want to go 19x9.5 + 25 up front
19x10.5 + 12 in the back

265/35/19 F
305/30/19 R

you needed spacers to get it flush???
thought this setup would get it flush without spacers.

Lmk and share input/suggestions.

The level of flushness depends on what you want

You can obviously be more aggressive, but you also wanted a straightforward setup with minimal hassle
The setup I recommended is for readily available sizes and no fender work required
If you wanna be hellaflush just say the word. I’ll give you those specs

Also: read the thread I linked in replying your original post

Bumping threads and starting new ones is counterproductive

Did you do this? Get it figured out? Any pics?

I work at a dealership and would like to pick up a set of these 19s for my '20 Sport but not sure which offset to get. Im not lowered(and dont plan on lowering it) but I would like to do wider tires and make the car look much more aggressive/meaner with the wheel/tire stance...and without running spacers.

If you are not lowering the car you probably want to be somewhere close to my set up.


width 9 +32 Front
width 10.5 +25 Rear


To be completely flush those offsets would need to be +30 and +23, but 2 mm is not noticeable.




http://www.the370z.com/2955622-post103.html

Thank you for the reply.


Im only planning to get the 19" Clubsport wheels from Nissan(I can get them at cost from dealership) so my only options for offsets are:

(19×10.5 +12) or (19×10.5 +22) for the rears
and
(19×9.5 +25) or (19×9.5 +35) for the fronts.

Im thinking about running 305/35r19 rears and 265/40r19 fronts since they are pretty dang close to the same diameter(don't want vdc lights/problems). Not sure if it matters but I do have the Sport brakes, also.

If anyone has any thoughts or insight, I'd like to hear.

Just a heads up, these wheels are now off back-order from Nissan. I had mine ordered since November and they showed up to my dealership this last week.

Did you pick these up? How is the fitment?

I do have them but I'm still waiting for winter to end before getting the z out.

I ordered mine from Z1. Took only 2 days. I got 19x9.5 +25 and 10.5 +25 rear. They didnt have the 10.5 +12 in stock so went with +25 instead. No spacers needed.

That rear offset is high (2mm more inset than stock Nismo wheels). The 10.5 +12 is much better match for the 9.5 +25 fronts. Otherwise, you'll need a 15mm spacer to make the rears look right.

I know but didn't want to wait God knows how long. thanks for letting me know. I have a set of them handy. will post a pic once installed