Wheel Spacers?
 

so looking to buy some spacers today for black friday. i currently am on stock sport rays 2015.. with 245 tires in the front and 275 in the rear i believe.. its the stock sizes. Im looking for a flush look, which thickness should i get and would i need extended studs and hub centric ?

yea ive tried looking for similar specs that i have through like 12 pages already im over it , can anyone help me lol

Your stock sport wheels are 19x9+47 & 10+30’s,,,the hub centric bolt on spacers come with studs & nuts to hold them on.
25mm all around would be pretty close.

Here’s a picture; unsure what their Black Friday prices are.https://uploads.tapatalk-cdn.com/201...448f3b9fb2.jpg


Sent from my iPhone using Tapatalk

is that what you have ? i dont want them to poke but just either to be flush or a tad bit in

I got different Wheels/ you may want to go 20mm to be on safer side....you shouldn’t have any problems with tire rub or poke:as long as you have stock suspension & alignment.
Park on level ground & tape a plumb weight to fenders @ center of each wheel & measure the gap between string & tire sidewall or string & wheel lip.
It’s simple to calculate.

Here's what mine looked like with stock sport rays, 20mm bolt on spacers (4 corners) and lowered 1". No rubbing at all.

Like This.https://uploads.tapatalk-cdn.com/201...c8e2edad26.jpghttps://uploads.tapatalk-cdn.com/201...0f605a6db9.jpg


Sent from my iPhone using Tapatalk

20 front and 20 back is a common set up. 15 15 looks more conservative though. Just an opinion.

20/20 is probably what you're after. I am running generic bolt-on hubcentric spacers and have found them to be just as good as expensive brand name spacers I have had in the past, but at less than 50% the price. Just make sure it's a good grade of aluminum and studs.

sweet i went on a shopping spree ^_^ .. got a 25 row cooler , z1 intakes , and 20 spacers 4 corners coming .. oh boy !

Nice!!

This looks like an easy method. I just went out and checked both of my rides and I may just get me some of these spacers today as well.

Z measured 26 mm at the rear, 23 mm at the front I may buy me a pair of 20s for the front and a pair of 25s for the back. If anyone can see why this may not be a good idea, please speak up...


My other car measured 20mm both front and rear. Pictures are below (please no judging...:icon14:)

The Black Friday Prices are $61 for 20mm and $76 for 25mm

:tup: