Enkei 18" Sizing help
 

I'm looking at Enkei PF01 wheels.

Front: 18x9.5 ??what offset??
Rear: 18x10.5 15mm offset

I have sport calipers and OEM ride height.

What front offset would not poke / rub??

+25

Sent from my SM-N910P using Tapatalk

Not sure that this helps but this is my drag strip set up :

18"x 10.5" Enkei with 38 O/S 285/40/18 Mickey ET Street SS

Drives very well, even on the street and in corners too!

I chose the 38 offset because it centered the tire in the wheel well, in case I go to a wider tire for the track. 15 O/S would look better.

Offset choices for PF01 18x9.5:

15, 35, 45

Whacha think?

I have seen post of many that track going +15 on both front and rear with PF01's. I would suspect it pokes some as my +18 do or you can get the +35 and run a 10mm spacer to have a more flush look. If you don't want to run spacers +15 would be my recommendation.

Sent from my SM-N910P using Tapatalk

http://www.the370z.com/wheels-tires/...s-370z-34.html

My wheel above.

Keep in mind my car is at stock height. U would want lower offset if ur car is alrdy lowered or u r planning to lower it.