Forgestar F14 super deep concave on Front? Anyone running this?
 

Is there anyone running a 19x9.5 or 10 width with the super deep concave on the Forgestar F14 SDC?

They said it probably wouldn't clear the caliper in the front so a regular deep concave but wasn't sure if someone made it happen?

thanks all!

I remember Jason at GetYourWheels talking about it - he's the one that said SDC wouldn't clear in the front due to the brakes, unfortunately

too bad

woulda been an affordable wheel option for super concave face

Just use the smallest spacer you can, so it can clear

I was going with a 19x9.5+15...
I believe the no go was for a G37 no tests on 370z which can go more aggressive...

Talk to Jason at GetYourWheels.

They said It would need to be a 9.5(-14 offset) to clear the front caliper...

See if Rohana RC-26 can fit, but I think they only come in 20x9, 10 and 11.

Thats 10mm further out than what i'm running, probably beyond the limits of stock fender unless you were gonna run like a 225 on it with -4 deg camber

I'm currently running a 19X9.5 +15 with a 25mm spacer on my front oem Nismo wheel :)

Then go for it

19x9.5 -15 will be fun

Lol, +15 is aggressive... -15 would look like a monster truck hhaahahah

I thought you said you were running +15 with a 25mm spacer

Puts you at -10

I'm running the stock Nismo wheels so front is 19x9.5 +40 with a 25mm spacer :)
Fitment is perfect for how I like it so I want the same stance. BUT I wanted a super concave...

oh. Then you're SOL. However that wheel is designed, it's simply not meant to be run in the front with SDC and big brakes. Big mistake on their part, but it is what it is