18 Niche Verona m150, spacers?
 

This would be my very first time buying some wheels.. Ive been looking at the 18" Niche Verona M150. Fronts: 8 or 8.5 w/ Rear: 9 or 9.5.
Ive been told these have an offset of +40 all around

Now Ive been looking at spacers for the first time, and ive heard alot about running close to a +20 offset..

Would running 20mm spacers all around bE fine? Would they rub?


Theyre going to be wrapped in 275/40/18 in the rear and 245/45/18 in the fronts on stock rims

09 touring WITHOUT sport brakes


Sent from my iPhone using Tapatalk

You should have no problem running this set up. Are you lowered at all?

why would you put spacers on +40 wheels ?

I am not lowered. Stock


Sent from my iPhone using Tapatalk

Your only choice on width with those is 8.0 and 9.5. The proper way to get this exact wheel in sizing and offsets that won't require spacers is to go with the custom forged version. There are plenty of options out there that won't require spacers for proper fitment and won't break the bank in the process.

PM me if you'd like some help!

Todd

yeah dont get that cheapass ****

nobody here should be running +40 anything

I was looking for something more spoke-y. But not alot of spokes. As well as something that wont drain the wallet. My range was about 200 min and 350 max.
I was hoping these plus possible 20mm or so spacers all around.

Would I need a possible fender roll with this set up? Was hoping that all I needed with these would be some spacers.


Sent from my iPhone using Tapatalk

unless you have a Civic...

OP - if you plan on getting aftermarket wheels, do it right the first time and get the proper specs...spacers don't belong on aftermarket wheels since they have offer a wide range of offsets