I saw that do you have a close up of the other 2 finishes like you did the gold.

These are the only other ones I have

http://aodhanwheels.com/Pictures/DS0...2_1911_VC1.jpg
http://aodhanwheels.com/Pictures/DS0...2_1911_VC2.jpg

Hey Anthony

What size tires would you suggest for the rear? My 275s had way too much stretch and I couldn't mount them. I don't mind staying stock height and want them to sit flush with stock camber if possible.

Also, how are you handling the center cap on the rear? Mine pops off from the center but when I mount the wheel on the rear.

Thanks...

how much for 2 19x9.5 and 2 19x11 in the black vacuum shipped to 35173

We run 275 on our car because of how low the car is. If you're not lowering the car, you can get away with a 295 or even 305.

In regards to the cap, we haven't run into this issue before. Is there anything on your hub that is interfering with center cap? What is causing it pop off?

Hey Anthony. Thanks so much for the response. I'm running your rims up front and the stockers in the back until I get this figured out. LOL...

I was hoping I'd be fine with the 295's or 305's, but just needed some confirmation. Still not sure why my 275's were stretched so much and was concerned that 285's would have the same issue...

About the center cap, check out my picture. It shows what's pushing off the center cap when I mount the rear rims. It's the axle nut that seems to be the problem... With that being said, would a 305 still be alright with a 5mm spacer?

Here's the Chrome finish

http://i.imgur.com/xzGBzbK.jpg

If too big, right click - view image.

http://www.the370z.com/attachments/n...d-13bc79z8.jpg

Looks good CoolToy. Are you running wheel spacers on the back? I'm still having issues with the axle nut pushing my center cap off...:shakes head:

Not mine.

Damn. This is confusing? Anthony, is my Z different, or are there a few different versions of these wheels? Not sure if I can swing wheel spacers to make the center cap work. Any suggestions?

They make 1 mm spacers, maybe that is all you need.

Saw this one when it arrived. It is a great value. I would probably choose a satin or a matte finish but that is my personal preference.

May have to give that a try. I've seen a few pictures on a 370z Facebook page that have The same issue as me. Not sure if its a difference in wheels or cars. In a strange way, I'm glad its not just me...

I've been trolling fleabay for different (domed) center caps with the same diameter as well. Just hard to find them in this color...

Thanks CoolToy...

No, there's only one version of the wheel. We've sold a bunch of these wheels and no one else has run into this problem. You can try a 1mm-3mm slip on spacer, maybe that's all the clearance you need.