Bought some new wheels
 

http://www.the370z.com/members/lava-...9x9-5-10-5.jpg

Can't wait to put them on the car
19x 9.5/10.5

Nice. Congrats!

Offsets?

Thx, super excited! Offset is 22 f&r

That calls for a meaty set up! 325s on the rear perhaps?

wow can I go that wide, that would be sweet

The rear fender wells can take major sizes. I wouldn't run 325 on a 10.5" wide wheel, but I currently have 325 on 11.5" which fit "loosely" in the rear. Judging from the available space, a 12-13" wide wheel would fit nice and "snug" carrying a 335 to 345-mm wide tire.

Nice Wheels LAVA!
Do you wish to keep stock diameter tire's or slightly shorter-due to lowered car.
Pending on Mfg. 265/35's & 305/30's are a good fit @ 26.3" diameter
oem diameter fat tires would be 275/35 & 325/30's.....325's on a 10.5 wheel is do-able with right tire selection.
Again nice wheels!

Now get them mounted please :)

Nice wheels post pics!

Yep-ready to see,,, I been looking at the Trans.Red Forgeline wheels; but I currently have beer money to go with my champagne taste! LolAttachment 107854Attachment 107855
Photoshopped


Sent from my iPhone using Tapatalk

Thx for the info

I'm not sure yet, I'm kind of leaning towards a 35-40 sidewall for a couple reasons. 1. the only real reason I lowered the car was to bring the wheel gap into check, 2. I'm not super worried about better handling because there are on 3 corners within 108 miles of where I live. I'm open to advice on size options, so if anyone has any please share it. I do want very wide tires in back.

I know I wish there were on yesterday

Unfortunately they won't be on until the spring because I'm putting the car up in a month for winter and I'm out of $$$.

Those are cool!

You pretty much have limited yourself with the +22 9.9" fronts,,,not going to go hardly over a 27" tire & a 40 series tire would probably be too narrow in your book.
Depending on the manufacturer-i'm pretty sure the Hankook V12 evo2 (or what ever it's called)-would probably about max out the front in height,with diameter of 26.9" 285/35/19.
It's an XL tire with 10/32" tread,29lbs.,9.5-11"wheel width recom,showed 11.3"section &
9.8"tread on a 10" diameter wheel....that would be closer to an 11" section & 9.8" tread on your front wheels...26.9" tall (i've seen them on a lowered car-they fit) should not hit turning lock to lock,,,that about maxes out the front on a height perspective.
Rear's or open game...just what ever you want to squeeze on there...plenty of room-specs are nearly exactly that of the Nismo rear wheels.
Hankook's run a tad narrower than other's & the closest rear fitment within specs of your wheel width,is the 325/30,,,10/32" tread,32lbs.,measured 13" section & 11.5" tread on a 11" wheel...that would be about 12.7" section & 11.5" tread on yours (full fitment) at 26.7" diameter.
All that being said put's the front .2" taller than rear...the fix is to run 275/35's on front at 26.6".
these diameter's are about closest to factory as you can get-pending you want fatter tires.
i pm'd you pic's of 265/35 & 305/30's on the same size wheels as your's.
be sure and post pics of what you get.
Have A Great Sunday!

wow thx, your like a personal tire consultant. I'm not against going with a 30 sidewall, and the wider the better in the back. I mentioned in the pm that the wheels are wider than the specs they gave me. I'm going to measure them again today

Wheels measure 10 3/8 wide front and 11.5 wide rear

before you mount tires, definitely check the front brake caliper clearance. those wheels are deep, might hit the caliper.

u'll probably want 5-10mm spacers on the rear.