Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Tuning (http://www.the370z.com/tuning/)
-   -   First round of mods scheduled for 4/11/12 (http://www.the370z.com/tuning/51785-first-round-mods-scheduled-4-11-12-a.html)

Sysopz 03-22-2012 02:29 AM

First round of mods scheduled for 4/11/12
 
Just looking for some advice on my first round of mods + tune I have scheduled on 4/11/12. I will have 1200+ miles on car by then.

I am fortunate that I have an experienced "Z" tuning shop only 5 miles from my house RT Tuning. I stopped in and talked to Eric and took a look @ the shop and was very impressed.

I really want the F.I. TDX Cat Back 12" Resonators / F.I. Resonated Test Pipes but I want to get started now and not wait 12-14 weeks to get my CBE.

I also am going with the Stillen G3 CAI @ the same time I get my F.I CBE.

So for now I am doing;

1. K&N drop ins & Mishimoto Air Intake Hose Kit (Red)
2. AAM COMPETITION 370Z S-LINE SHORT TAIL EXHAUST
3. UpRev tune done on dyno.

RT will re-tune the car and just charge me dyno time when I get my CAI & CBE.


I guess my question is am I on the right path with my first round of mods or should I make some adjustment to the parts I chose before I go through with it on 4/11/12 ?

Thanks in advance for any input or suggestions you guys have.

XwChriswX 03-22-2012 02:54 AM

So far everything looks good, you've got a good shop working with you, you've got a Plan of what you want to do.

With your exhaust and intake idea's, you'll definitely see some gains on the Dyno.

My only observation, not a critique, is if you are planning to get a full CBE and CAI, is it really necessary to get the MAF tubes and short tails right now, to then spend more for the other parts... It's kind of a 'why spend twice for the same thing' sort of mentality vs just saving and getting what you want the first time.

Hopefully we'll see you at some of the PA meets one day. :tiphat:

Sysopz 03-22-2012 03:20 AM

Quote:

Originally Posted by XwChriswX (Post 1614009)
So far everything looks good, you've got a good shop working with you, you've got a Plan of what you want to do.

With your exhaust and intake idea's, you'll definitely see some gains on the Dyno.

My only observation, not a critique, is if you are planning to get a full CBE and CAI, is it really necessary to get the MAF tubes and short tails right now, to then spend more for the other parts... It's kind of a 'why spend twice for the same thing' sort of mentality vs just saving and getting what you want the first time.

Hopefully we'll see you at some of the PA meets one day. :tiphat:

Maybe not doing the short tails and buying the FI test pipe for sale in another thread for $100 from a member located in philly is a better idea, I sent him a reply saying I would take it.

The MAF tubes & filters are so cheap and I don't think they will hurt.

Thanks for the advice.

XwChriswX 03-22-2012 03:36 AM

Quote:

Originally Posted by Sysopz (Post 1614014)
Maybe not doing the short tails and buying the FI test pipe for sale in another thread for $100 from a member located in philly is a better idea, I sent him a reply saying I would take it.

The MAF tubes & filters are so cheap and I don't think they will hurt.

Thanks for the advice.

The Intakes and Test Pipes will help beef up your exhaust note the same as the short tails would. So you won't really lose anything sound wise, which is all the short tails give you. Performance gains are minimal at best. Every now and then an F.I. CBE comes up for sale used.

Since I was bored and had nothing better to do, I went through the for sale section and found these threads:


K&N Drop Ins: http://www.the370z.com/parts-sale-pr...p-filters.html

K&N Drop Ins: http://www.the370z.com/parts-sale-pr...-shipping.html

HPS Post MAF Tubes: http://www.the370z.com/parts-sale-pr...maf-tubes.html

Stillen Gen III's: http://www.the370z.com/parts-sale-pr...kes-socal.html

F.I. Resonated Test Pipes: http://www.the370z.com/parts-sale-pr...mber-arms.html

F.I. Resonated Test Pipes: http://www.the370z.com/parts-sale-pr...700-miles.html

AAM Short Tails: http://www.the370z.com/parts-sale-pr...ort-tails.html


Thread items aren't marked as sold so you can start with these. (Notice the price on the short tails, 1/4 the price of a new CBE for tails. :ugh2: )

Sysopz 03-22-2012 03:51 AM

Thank you very much for your help.

XwChriswX 03-22-2012 04:08 AM

:tiphat:

Erik@RTTuning 03-22-2012 11:32 AM

Thanks for stopping in Joe. We look forward to turning up the wick on the Z car with you. :)

Sysopz 03-22-2012 12:12 PM

Quote:

Originally Posted by Erik@RTTuning (Post 1614545)
Thanks for stopping in Joe. We look forward to turning up the wick on the Z car with you. :)

I am looking forward to having some fun with the "Z" and feel pretty lucky you were able to get me in so quick. As well as having a tuner just a few miles from me.

Thanks for all your help and great customer service the other day.

tanamerra 03-22-2012 03:45 PM

Vince at R/T tuning is very good and highly recommend the shop.

Sysopz 05-01-2012 10:58 PM

Got my K&N drop ins & Mishimoto Air Intake Hose Kit (Red) along with UpRev tune done @ RT Tuning today. I am happy with the results, they are a really great shop to deal with & I highly recommend them. Thanks a lot Vince and Eric.

Base: 285 WHP 242 TQ

Tuned: 305 WHP 256 TQ


They are going to install wheel spacers 15mm front & 25mm rear along with Invidia test pipes & re-tune Friday.


Great shop, great guys! @ RT!

VQStryker 05-02-2012 08:32 AM

you should forget all that and just turbocharge it to H3ll :)

Good luck OP and have fun!!

Sysopz 05-02-2012 09:59 AM

Quote:

Originally Posted by VQStryker (Post 1698511)
you should forget all that and just turbocharge it to H3ll :)

Good luck OP and have fun!!

Already in the works man, just waiting to see how Boosted Performance makes out with his build then go with whatever FI solution Vince @ RT suggests I get.

NYBladeZ 05-02-2012 10:05 AM

AAM short tails with stock mid pipes will yield little to no gains, you might get a little power out of the intakes hoses and k&n but not worth the tune. Save your # wait for the exhaust to come in and if you're getting the G3's don't bother with the intake hoses and k&n. Patience bud...

Erik@RTTuning 05-02-2012 03:48 PM

We already tuned his car and Joe actually made some great gains for such simple changes.

See you again soon Joe!

Sysopz 05-02-2012 07:37 PM

I was actually a little skeptic reading how much more responsive & consistent throughout the power band an UpRev tune makes the Z feel but it's like night and day how much better my car feels after the tune. I can't wait to get the test pipes installed on friday!

Sysopz 05-04-2012 08:04 PM

Got my Test pipes installed today + re-tune @ R/T Tuning, they also did 25mm spacers all around. It looks and sounds really great. Vince is kinda like a boss!

I will post some pics tmro of the car w/ spacers.

Thanks again Vince & Erik @ R/T !

Thechidz 05-04-2012 08:15 PM

Nice

Shadezz 05-15-2012 10:09 AM

So where's the pics?

Sysopz 05-15-2012 03:17 PM

Quote:

Originally Posted by Shadezz (Post 1721142)
So where's the pics?

I am lazy..I will post some pics next day or so.

tjlazer 05-15-2012 04:13 PM

Lookin good, great numbers. I would of just waited to get all the parts I plan in the end, and just do the tune then. Saves time and $. I still have not done my tune yet and been running all my bolt ons for ever a year. I hope to get some nice gains after the tune!!!

Sysopz 05-15-2012 04:35 PM

Quote:

Originally Posted by tjlazer (Post 1721874)
Lookin good, great numbers. I would of just waited to get all the parts I plan in the end, and just do the tune then. Saves time and $. I still have not done my tune yet and been running all my bolt ons for ever a year. I hope to get some nice gains after the tune!!!


I agree I should have done everything @ one time. Vince comp'd me on the re-tune after the TP's install this went a long way with me hence why I wont take my car to anyone else but him ever.

I think I am on the right track now;

Audio Upgrade
Swift Springs
F.I. Exhaust
Turbo Kit

In that order then I am done.


All times are GMT -5. The time now is 11:01 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2