Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Tuning (http://www.the370z.com/tuning/)
-   -   LF: Older Uprev Rom file for 370Z Nismo or G37 IPL (http://www.the370z.com/tuning/122463-lf-older-uprev-rom-file-370z-nismo-g37-ipl.html)

cwrenny 07-04-2017 12:39 PM

LF: Older Uprev Rom file for 370Z Nismo or G37 IPL
 
Hey Guys,

Long story short, like some of the people still using Uprev, I got kinda screwed over with their removal of the DTC toggles. Though I don't usually use the toggles, I was unaware that these motors have an issue with boost or larger MAF housings and throw a correlation code whenever the pressure sensor sees something it doesn't like. If it was just a CEL I wouldn't care too much but this also throws the car into limp mode during long drives. I was able to get the last version of Rom Editor that still allowed for code toggling. The thing I'm now looking for is an older version of my car's ROM that is compatible with the older Rom Editor. The computer is a 1A32B and is used in the 370Z Nismo as well as the G37 IPL. If any one can help it'd be greatly appreciated.

Cheers!

cwrenny 07-07-2017 08:35 AM

Bump**

If no one has an older ROM... can anyone chime in on the MAF/MAP Throttle position correlation code that comes up when you go FI or use a larger MAF housing? AFs have been tuned and I have tried altering the MAF table as well as going all throttle relearn procedures to try and get around the code but it still keeps putting me into limp mode on long highway commutes.

FYI: tuning was initially done by setting fuel comp table to 100 across the board and adjusting k value to get initial stable AF numbers. Fine tuning was then done with the fuel comp table.

I know the first answer is going to be go ecutek... but I'd rather not waste the money spent on the Uprev tuner package and the ARC add on...

Bardabe 07-14-2017 04:51 PM

are you tuning yourself or is another shop tuning the car for you?

cwrenny 07-21-2017 08:18 AM

I'm tuning myself. I got it all figured out now. The P006A code is a problem when going with larger MAF housings or FI. My tuning procedure was correct, the only way to get around this issue is to disable the code. I was able to get a local tuning shop to lend me a hand anymore... Apparently due to a potential lawsuit... they are claiming that allowing the public to disable engine codes promotes running cars without cats. lol


All times are GMT -5. The time now is 05:54 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2