rub and tug for rubber?

we could make a deal and i can just go slide those hankooks around since they arent sticky :stirthepot:

I talked to you about the Enkei NT03+M's. I was able to get them ordered last week.

18x10.5 +30 square with 285/35-18's RS3. Should have them by Friday. Can't wait to try them out at AMP. :driving:

With the difference in cost of the tires in 18 and 19 inch; I am only out roughly $1000 for the wheels.

Sorry DE hopefully you will find a buyer for those 305's.

I don't know much about track days, but I've spent some time and money on both "stock" and "street" class wheel/tire setups for autox. Last year, I had 285/35/19 square RE-11s on my S-tunes, which are essentially identical to the Sport Rays. To me, the 285's looked very happy on the 9" fronts, and the set up overall was decent. The RE-11s give plenty of feedback when they're pushed.

This year, I dropped to 18" Forgestars and ran both 295 Rivals square and 285 R-S3s square. I have attached a pic of all three stacked together. What's impressive is the 285 R-S3 vs. the 285 RE-11...the RS-3s are nearly the same damn size as the 295 Rivals. The 295 Rivals on the 9" fronts were a bit pinched, but they were pretty awesome for autox. The RS-3s, so far, however, have been even better....basically the closest thing I've found to r-comps in a 200 tread wear street tire.

Are you going to run spacers for the rear? I have been looking at those same wheels and the RS-3's too. Wont be at AMP since I am driving from OK but I will be rocking at the Kart track!

Yes I will be running 20mm spacers in the rear.

Wish I would have time to do both the track day and the kart track.