Nissan 370Z Forum
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Track / Autocross / Drifting / Dragstrip (http://www.the370z.com/track-autocross-drifting-dragstrip/)
-   -   Jrz rs pro for track (http://www.the370z.com/track-autocross-drifting-dragstrip/74829-jrz-rs-pro-track.html)

DLo 08-22-2013 09:37 PM
Martin - Does this mean you'll be ready to go for Sat night SoW event?

martin82 08-22-2013 09:51 PM
Lol not possible I'm in west la w coilovers and car is in Oc at corner3 garage, needs a corner balance, install, alignment!! Now deciding on new single TI exhaust as well!! W hfc and swapable to test pipe install headers and then go for a tune!

martin82 08-22-2013 09:52 PM
I'm trying to make sept 8 at acs / Nissan meet if possible

DLo 08-22-2013 09:58 PM
I'll be at corner3 tomorrow AM for some brake work. What coilovers did you have in your car before the jrz's?

martin82 08-22-2013 10:25 PM
Nice, what r u doing to the brakes?
I had m7 coilovers sold them to pick up the jrz! Gonna order the tomei single exhaust soon and sell the ark dts exhaust. Need the single for space for a diff cooler later!!!

DLo 08-23-2013 04:04 PM
Nothing big just pads, SS lines, finishing the stillen brake cooling kit, etc in prep for track days.

martin82 08-23-2013 04:11 PM
nice what pads did you go with?

DLo 08-23-2013 04:44 PM
Hawk HP+

I had them on my Evo X and they were excellent for my needs (dd and occasional track).

ChrisSlicks 08-23-2013 07:58 PM
Quote:
Originally Posted by DLo (Post 2458775)
Hawk HP+

I had them on my Evo X and they were excellent for my needs (dd and occasional track).
Just be careful. The HP+ can fade rather badly on this car and trigger ice mode on track. As long as you don't push them too hard they will be okay.

DLo 08-23-2013 10:38 PM
Yikes! Dully noted!

martin82 09-05-2013 07:12 PM
https://sphotos-a.xx.fbcdn.net/hphot...18372274_n.jpg

found some baller reservoir mounts:
https://sphotos-b.xx.fbcdn.net/hphot...37354312_n.jpg

synolimit 09-05-2013 08:08 PM
Quote:
Originally Posted by 03threefiftyz (Post 2432210)
Trust me. Get the quick disconnects. It will make your life easier. Spring rates sound fine (albeit on the soft side IMO), but you are definitely going to want more spring once aero and R-comps come into play. I run just under 18k front and 15.2k rear (1000/850lb) on my autocross car. Not apples to apples since I use very large A6's and have aero. I also don't use a rear sway bar.
Off topic, how do you convert kg to lb? Cause it sure as hell isn't the correct mathematical way.

synolimit 09-05-2013 08:14 PM
Dear lord I know nothing about suspension reading yours guys posts. Can't there just be a "here's your spring, sway, settings, have fun!"

ChrisSlicks 09-06-2013 06:53 AM
Quote:
Originally Posted by synolimit (Post 2474826)
Off topic, how do you convert kg to lb? Cause it sure as hell isn't the correct mathematical way.
Sure it is.

2.204 lbs per kg x 25.4 mm per inch = 55.9974146

synolimit 09-06-2013 10:47 AM
Quote:
Originally Posted by ChrisSlicks (Post 2475244)
Sure it is.

2.204 lbs per kg x 25.4 mm per inch = 55.9974146
Lol times 25.4 is not kg to lbs. that's adding anothe factor, little more in depth. Where's the per inch part found or is it 25.4 and that's it? Stock front is like 8.5x2.2x25.4= 474lbs?


All times are GMT -5. The time now is 04:17 PM.
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2