That's pretty much the same as we did for mine. Don't waste your money on a 4pt. PCA and some other clubs won't allow them and submarining is a bad time.

Thanks for the feedback guys. So simply drill straight through transmission tunnel and floor? And where about in the floor under the seat, just behind the front edge of the seat of further back?

Different harnesses need different angles. I suggest you read their installation manual or have someone do it. Even the 2 points under the seat need a certain degree...

Thanks again! Will do.

for example here is schroth profi II: page 2: http://www.schrothracing.com/docs/Sc..._Checklist.pdf

hmm, looks like a sub strap will not work with stock seats, as there is no opening for them. Might be time to look into a dedicated racing seat...

With the right type of harness you can run it through between the base and back.

Sub straps? lol

Correct with stock seats you do not run a sub strap, if anything u can run a 4 point like schroth that has anti submarining technology.... ASM? I think

Ended up going with a set of these:

http://i1266.photobucket.com/albums/...185E1F0BB6.jpg

http://i1266.photobucket.com/albums/...18602E45A6.jpg

Great choice, that's what I have in black!! I am reinstalling my seat again in case you need pictures let me know..

Well if you're offering, I wouldn't mind seeing some pictures of the mounting point placement (lap and sub straps) that you have.

Sorry pics are a bit late. Once its all installed you will see some pics I added cotter pins so the belts can't be removed or unclip on their own.

http://sphotos-a.xx.fbcdn.net/hphoto...69316585_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...41045900_n.jpg
http://sphotos-a.xx.fbcdn.net/hphoto...93162529_n.jpg
http://sphotos-a.xx.fbcdn.net/hphoto...96101802_n.jpg