|
Quote:
You could always use a small spacer in the rear for a more aggressive fitment, but these will fit out of the box! Pricing is extremely low at just $999 shipped for the set!! These are IN STOCK and Ready to Ship, so give me a call to get your set asap! http://i.imgur.com/fpsSj7j.jpg |
Jeremy's RS4 on M580 Brushed Stainless:
http://i.imgur.com/njTIaSK.jpg http://i.imgur.com/8F2HADA.jpg?1 http://i.imgur.com/6JTnWoH.jpg http://i.imgur.com/Uv4nSy0.jpg Bagged 350Z on AG F430s dropped by! http://i.imgur.com/UtRYoMs.jpg?1 http://i.imgur.com/3HoCB6u.jpg?1 http://i.imgur.com/0nw0oNf.jpg?1 http://i.imgur.com/hgutRAS.jpg?1 Another new AG Directional style! http://i.imgur.com/3qMCmiB.jpg?1 From top going clockwise: Design 11, Design 21, and Design 31 F121: http://i.imgur.com/QFGe199.jpg?1 http://i.imgur.com/SU5jRWk.jpg?1 F131 http://i.imgur.com/e8Y0J0S.jpg F111 http://i.imgur.com/mGokGH0.jpg |
Yes, I think I will be very pleased... http://s3.amazonaws.com/rapgenius/mr-burns-picture.jpg
Design 31 looks pretty sweet too. Hopefully someone will throw a set on a Z. Thanks for posting the pics! Are you allowed to post any insight on the process for the wheels? I see that you have faces and barrels and are sending sets to the painters quite frequently. Do the vendors ship you the wheel blanks and you do the rest, IE, drilling the bolt pattern, assembly, and finishing? |
Heres a finish thats not for everyone, but I think its one of the most stunning finishes yet!
M510 in Bespoke 3 Brushed Candy Red 20x10s all around going out to a G37 http://i.imgur.com/gxuViNK.jpg http://i.imgur.com/2G3ZzRr.jpg http://i.imgur.com/dI6j3K3.jpg The red really shows off the brushing unlike any other color I've seen so far! |
AE 86, Miata, MR2, a lot I think the Honda crowd has moved to 16s and 17s.
|
^Those would look amazing on a white or black car!
|
Quote:
It depends on the wheels, some we can send to the finishers ourselves if its a finish that the company doesnt offer. Most of the time we get them finished, such as bespoke and forged wheels, etc. |
Heres a set of M510s in Bespoke 3 Brushed Matte Clear
http://i.imgur.com/p6otylL.jpg http://i.imgur.com/LhGvAzG.jpg?1 Great looking finish! Forgestars finally came back in stock this week... http://i.imgur.com/UDB5P3Q.jpg?1 Backorders are being fulfilled, thanks for the patience all! |
Heres a set of M510s in Bespoke 3 Brushed Matte Clear
http://i.imgur.com/p6otylL.jpg http://i.imgur.com/LhGvAzG.jpg?1 Great looking finish! Forgestars finally came back in stock this week... http://i.imgur.com/UDB5P3Q.jpg?1 Backorders are being fulfilled, thanks for the patience all! |
Quote:
|
Quote:
|
my c5fv better be there Jason :)
|
Quote:
|
Quote:
Quote:
|
Quote:
|
This beast dropped by the warehouse this week for some Forgiatos!
http://i.imgur.com/sJHjLtH.jpg?1 355/25/21 rear tires! Before: http://i.imgur.com/tBHgGQP.jpg?1 After: http://i.imgur.com/NIwQAK0.jpg?1 http://i.imgur.com/w7AHeQX.jpg?1 http://i.imgur.com/tBVUTJT.jpg?1 http://i.imgur.com/kA5Cvqx.jpg?1 |
At first I was like :shakes head: and then I was like :eek2:
I don't necessarily like that style of wheel, but I love me some Aventador. I would have stuck with the stock wheels, those are sick! I'll trade you my Volks! |
Quote:
|
Many have been asking for completed photos of the new Alpha Forged wheel, well the first photos are finally available!
Centers have brushed faces and polished windows, with a matte dark tinted (DDT) powdercoat over it! Also shown is the Titanium hardware which is a standard feature! http://i.imgur.com/CTZFKqG.jpg http://i.imgur.com/khTRK2S.jpg http://i.imgur.com/i9RXrYa.jpg?1 Some asked for photos of the back of the wheel, so here it is: http://i.imgur.com/cNcsc28.jpg?1 You can see the pocketing on the back to shave off as much weight as possible This center weighs only about 7.8 pounds! Some additional info on the Titanium Hardware that comes standard with Alpha Forged: Weight of the normal steel bolt and nut: 0.8 OZ http://i.imgur.com/4VBQGOi.jpg?2 Weight for the Titanium bolt and nut: 0.4 OZ http://i.imgur.com/Cw5jWXd.jpg?2 Thats half the weight! Multiply that by 40 bolts = 16 oz Thats a savings of 1 lb per wheel, not the biggest difference, but all the weight savings is around the edge which is more beneficial than weight saved towards the center. We are still looking for partial sponsorship cars to run these, so contact me sponsorship information! |
:yum:
Faceglide is quite pleased! |
Heres a set of CE28Ns we completely refinished with Matte Bronze centers and gloss Gloss Bronze Lips!
http://i.imgur.com/baWcz6X.jpg http://i.imgur.com/1hVczld.jpg |
19x9 19x12 F310s in Matte Gunmetal for Vincent's R8!
http://i.imgur.com/6PPlXZT.jpg?1 19" SDC Forgestar F14s in Textured Black for Capri's 370Z vs 21x10.5 M590s in Bespoke 1 Matte Black http://i.imgur.com/p1wTcJy.jpg?1 |
2 Attachment(s)
Hey Jason, I had the guy on here do a little photo shop, what do you think?
Sent from my SAMSUNG-SGH-I527 using Xparent BlueTapatalk 2 |
The F121 is hella nice!
|
Quote:
|
Quote:
The polished split 5 spoke towards the top of this picture... are those AG's What model? |
Those would be the F531s!
|
Some customer install photos today!
Vossen VFS-1s in 20x9 20x10.5 on a GS350 http://i.imgur.com/eGIiZli.jpg?1 http://i.imgur.com/f5s8Y0q.jpg?1 19" Fondmetal 9RRs in Titanium on an E63 http://i.imgur.com/ZtRiNoe.jpg?1 http://i.imgur.com/GZiQVwj.jpg?1 20x10 M590s on a B8 S4! http://i.imgur.com/w7iutRD.jpg |
Heres examples of two different gold powdercoats we offer:
http://i.imgur.com/3Ude97S.jpg M510s Bespoke 2 Gloss Candy Gold - Metallic Silver Basecoat w/ Candy Gold Topcoat http://i.imgur.com/wqhGPD2.jpg M580s Bespoke 1 Gloss Metallic Gold http://i.imgur.com/hOY8a0Q.jpg |
Im jonesing so hard for my wheels to be done! The closer it gets the harder it is!
|
I'm feeling the same way!
Sent from my SAMSUNG-SGH-I527 using Xparent BlueTapatalk 2 |
Here are some 20" Vossen CV4s in Matte Graphite!
http://i.imgur.com/FUfGgZ7.jpg http://i.imgur.com/jvrVdlw.jpg I think these would be my favorite style from Vossen right now, you dont see them as often though. Heres a photo to show concavity! http://i.imgur.com/0AlyGtd.jpg |
Today's update is about TPMS valve stems!
Many of our customers who pick up a set of Gunmetal or Black wheels want the entire setup to match, unfortunately almost all TPMS sensors come standard with silver valve stems. This is no longer a problem as we just picked up Black and Gunmetal TPMS valve stems to use as full replacements for the standard silver ones! This is a $50 upgrade that we have to purchase separately, so that we can offer it as an option on your wheel and tire package. These are FULL metal replacement valve stems, that are anodized black and gunmetal. Standard silver shown on left, Gunmetal in the middle, and black on the right. http://i.imgur.com/kIwcBM2.jpg Let me know if you are interested in a set for your next set of wheels! |
1 Attachment(s)
I want gunmetal ones since I have gunmetal lugs. Unless you think one of the other colors will look better. Once you get the wheels and let me know I definitely want valve stems now that you have been talking about them.
Sent from my SAMSUNG-SGH-I527 using Xparent BlueTapatalk 2 |
Quote:
Sending you an Email! |
Any pics of my wheels???
|
Quote:
http://i.imgur.com/gO8RPLM.jpg?1 Those Michelin PSS :drool: And you guys wanted to see the dubs as well right? Who wants to run these with deeeeep lip on their Z? :eekdance: http://i.imgur.com/TLaeIfc.jpg?1 |
That bronze is perfect! And such thick tires. Can't wait!
|
what wheels you go with Lost?
|
Quote:
Quote:
19x10 +30 275/35R19 PSS 19x11 +18 305/30R19 PSS |
| All times are GMT -5. The time now is 09:32 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2