Will that be flush without spacers? How about camber? Stock camber settings? Thanks

Flush with no spacers and stock camber settings.

Fronts are flush with 19x9.5 +20 and 255's? I feel like im not flush with 19x9.5 +24 and 275s upfront and a 1" drop (tein s-tech)

My rears are horrible though.. 19x11 +23 with 305s.. I may need to get me some new wheels and get flush.

And you are running Super deep concave? Pics please. Why not spacers?

I peeked at your album you look pretty flush to me. If it isn't I have spacers so no biggy.

19x9.5 +20 and 19x11 +15 with 255/305 setup looks good to me

http://farm7.staticflickr.com/6058/6...a64aa5a7_b.jpg
m310-matteblack-370z-frontside by AvantGardeWheels, on Flickr

Sorry no im NOT running superdeep concave. I have had my wheels for almost 2 years now so im guessing it was the original depth for F14's.

Also I would prefer to get flush with out using spacers. My rears most definitely need some more flush. Fronts are ok as is...

http://www.the370z.com/members/nitex...-back-home.jpg

http://www.the370z.com/members/nitex...ventus-v12.jpg

http://farm9.staticflickr.com/8169/8...a96e2ed4_b.jpg
iPhone 5 test pics by nitex08, on Flickr

From these pics it looks pretty flush in the rear. Maybe I just need more low, but it does not feel as flush as the front in person.

I think the 19x11 +15 would be PERFECT! (my rear is 19x11 +23)

Wheels arrived about 30 minutes ago, I will have them on by the end of the week, shooting for tomorrow actually. Friday at the latest :tup:

My experience with Eric, and Forgestar has been great. It has been 2 months exactly as of today from the time I placed my order with Eric over the phone. Taking into consideration SEMA was going on during this time that is outstanding.

Just wanted to say thanks again!

Here is how well the fronts were packaged

http://i850.photobucket.com/albums/a...e/DSCN3465.jpg
http://i850.photobucket.com/albums/a...e/DSCN3467.jpg
http://i850.photobucket.com/albums/a...e/DSCN3468.jpg
http://i850.photobucket.com/albums/a...e/DSCN3469.jpg
http://i850.photobucket.com/albums/a...e/DSCN3470.jpg

The rears are just under 4" deep and look way deeper in person than I could capture in a picture. Once mounted I think you will be able to notice more.

http://i850.photobucket.com/albums/a...e/DSCN3475.jpg
http://i850.photobucket.com/albums/a...e/DSCN3466.jpg
http://i850.photobucket.com/albums/a...e/DSCN3478.jpg
http://i850.photobucket.com/albums/a...e/DSCN3477.jpg
http://i850.photobucket.com/albums/a...e/DSCN3476.jpg

Stay tuned for mounted pics! :tup:

Looking sick!!!

Nice, MR&MRS!!!!!!

Agreed! They are going to look great on the Z

nice can't wait to see them installed!!

Little teaser for the night, wife and I are going out for pictures tomorrow with our good camera, that we dont know how to use lol.

http://i850.photobucket.com/albums/a...p/DSCN3482.jpg
http://i850.photobucket.com/albums/a...p/DSCN3479.jpg
http://i850.photobucket.com/albums/a...p/DSCN3480.jpg
http://i850.photobucket.com/albums/a...p/DSCN3481.jpg

They look amazing, perfect offsets for my taste!

very nice!! more pix more pix!! lol

These are "THE" wheels to have. Very nice!

Looks awesome!

Do you know how much these weigh in the 19s.

Sorry we didn't weigh them. But they should be mid 20's

Mr&Mrs, these look awesome! I like what you've done with ur car all around! Any particular reason you didnt go "super deep concave" all around?

I wanted to avoid to much camber in the front. After putting these on I think I may have been safe with 10", but the contrast of the two actually looks really good.

Makes sense. Thanks. Look forward to more pics!

To do the super deep concave all the way around you have to run a really low offset to clear the brakes and the spindle nut.

I also agree with Mr&MRS I really like the front and rear being a tad different to give it a great staggered look.

http://i850.photobucket.com/albums/a...e/DSC_0248.jpg
http://i850.photobucket.com/albums/a...e/DSC_0301.jpg
http://i850.photobucket.com/albums/a...e/DSC_0296.jpg
http://i850.photobucket.com/albums/a...e/DSC_0294.jpg
http://i850.photobucket.com/albums/a...e/DSC_0236.jpg

Good looking Z!

damn that's so freaking sick!!...I really hope they decide to build these in 20's

There are no plans in the foreseeable future for 20" super deep concave.

[QUOTE=Mr&Mrs;2073443]http://i850.photobucket.com/albums/a...e/DSC_0248.jpg



have any pix from directly from the back to see how flush it is?

Beautiful wheels.... I need to keep these in mind...

There are two pictures posted on Friday that should give you a pretty good idea. I have no straight on shots from the rear right now.

Looking great!

More Super Deep Concave

http://farm9.staticflickr.com/8211/8...409207f8_b.jpg
photo 3 by GetYourWheels.com, on Flickr
http://farm9.staticflickr.com/8473/8...6dc87992_b.jpg
photo 2 by GetYourWheels.com, on Flickr
http://farm9.staticflickr.com/8082/8...51542377_b.jpg
photo 1 by GetYourWheels.com, on Flickr

Are those new sets you have 19s? Now that you have them, any chance you could weigh them?

We can weigh them however it will be different for every offset due to pad height differences.

19x9.5 +15 is 24.5 lbs.

Any plans for offering the super deep concave in 20" variety?

Sent from my SPH-L710 using Tapatalk 2

There are no plans on making the Super Deep Concave in 18" or 20" at this time.

Any reasoning for this?

Sent from my SPH-L710 using Tapatalk 2

Money to open molds its about 10-20k per part number. The demand for 19" is higher than the rest.

Would any of those happen to be mine ;)

Eric what is the status of these wheels?

I've ordered since the day before thanks giving and still nothing and no response from you on email about our discussion since the projected date of 3rd-11th of January ship dates were busted.:shakes head:


Supposedly there are lots of people on this order waiting for 19x9.5s.


Anyone else having issues getting these wheels?