Getting Codes and S-Mode Warning light

ethan_goode · 10-20-2020, 01:58 PM

I have a 2011 370z Nismo and lately my key light has been coming on, so i pulled the steering lock fuse and replaced my key battery but it's still on. I also have S-Mode but it has been giving me a warning light when i try to turn it on. So I ran a diagnostics test and got a few codes (P2101,P0223,P2133,P1233). Which relate to the throttle body and some sensors on the gas pedal. Any help?

SouthArk370Z · 10-20-2020, 02:06 PM

I'd unplug the TB and pedal connectors, give them a good cleaning, and plug them back in. Might need to do the TB relearn procedure when you're done.

If you plan on doing your own troubleshooting/repairs, the FSM is a valuable resource. Link in my sig.

ethan_goode · 10-20-2020, 02:17 PM

any specific cleaner you recommend for the sensors?

SouthArk370Z · 10-21-2020, 05:46 AM

Quote:

Originally Posted by ethan_goode

any specific cleaner you recommend for the sensors?

I try to get CRC contact cleaner when I can. But I've never run into a brand that didn't get the job done.

ethan_goode · 10-21-2020, 11:59 AM

Ok thank you, i'll try that and let you know how it goes!

ethan_goode · 12-07-2020, 06:32 PM

Hey So I think I might have narrowed my problem down to the two plastic push pin sensor on the clutch pedal. There is one that is pushed down when the clutch is all the way up and engaged and one that is pushed when the clutch is all the way down. And there is a little white plastic stopper that pushes the pin in for each. The stopper for the button that is pushed in when the clutch is out and engaged is about a centimeter to high so the button isn't all the way pushed in. Could anyone check on their z and see if that stopper is centered on the pin?https://www.dropbox.com/s/yrv35sbe60..._3360.mov?dl=0

SouthArk370Z · 12-07-2020, 07:17 PM

Quote:

Originally Posted by ethan_goode

.... Could anyone check on their z and see if that stopper is centered on the pin?

Try looking in the FSM. Link in my sig.

IBJAMMN · 01-03-2021, 03:11 PM

On my 2010 40th - Same thing with the Key light - I just pulled the fuse - however, the key light stays on - been like that for over a year - Just ignore the light.

Blockboi333 · 05-02-2023, 12:16 AM

Been having the same problem intelligent yellow key light pops on a few mins after start up when i drive off the smode warning pops up

It also happens if i just sit in the drive way with the yellow key light on playing with the clutch going 1-6 and reverse im guessing a switch went bad but its use to work with a negative terminal taken off and put back on now its consistent like a short that got bad

Note my fob hasnt been working for awhile i just use the key slot on the left side never had an issue till lately

2014 370z sport 6mt

10-20-2020, 01:58 PM	#1 (permalink)
ethan_goode Base Member Join Date: Aug 2020 Location: Texas Posts: 7 Drives: 11 Nissan 370Z GM M6 Rep Power: 4	Getting Codes and S-Mode Warning light I have a 2011 370z Nismo and lately my key light has been coming on, so i pulled the steering lock fuse and replaced my key battery but it's still on. I also have S-Mode but it has been giving me a warning light when i try to turn it on. So I ran a diagnostics test and got a few codes (P2101,P0223,P2133,P1233). Which relate to the throttle body and some sensors on the gas pedal. Any help?

10-20-2020, 02:06 PM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	I'd unplug the TB and pedal connectors, give them a good cleaning, and plug them back in. Might need to do the TB relearn procedure when you're done. If you plan on doing your own troubleshooting/repairs, the FSM is a valuable resource. Link in my sig. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

05-02-2023, 12:16 AM	#9 (permalink)
Blockboi333 Base Member Join Date: Oct 2022 Location: New york Posts: 1 Drives: 2014 370z manual Rep Power: 2	Smode warning, yellow key light Been having the same problem intelligent yellow key light pops on a few mins after start up when i drive off the smode warning pops up It also happens if i just sit in the drive way with the yellow key light on playing with the clutch going 1-6 and reverse im guessing a switch went bad but its use to work with a negative terminal taken off and put back on now its consistent like a short that got bad Note my fob hasnt been working for awhile i just use the key slot on the left side never had an issue till lately 2014 370z sport 6mt

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
S-mode warning light	Zvengeance	Nissan 370Z General Discussions	18	04-14-2024 02:56 AM
S-Mode Failure Warning Light	Tracer 09	Engine & Drivetrain	10	04-24-2017 05:19 PM
s-mode warning	lamaralphonso	Nissan 370Z General Discussions	5	04-28-2016 08:30 PM
S-Mode Warning Light after new Southbend Clutch/Flywheel installed	Hatsuongmai	Engine & Drivetrain	8	05-13-2015 05:08 PM
Limp Mode w/ codes - Tried multiple fixes / Searched	TPrelude-370z	Nissan 370Z General Discussions	19	03-14-2014 05:33 AM

10-20-2020, 02:17 PM	#3 (permalink)
ethan_goode Base Member Join Date: Aug 2020 Location: Texas Posts: 7 Drives: 11 Nissan 370Z GM M6 Rep Power: 4	any specific cleaner you recommend for the sensors?

10-21-2020, 11:59 AM	#5 (permalink)
ethan_goode Base Member Join Date: Aug 2020 Location: Texas Posts: 7 Drives: 11 Nissan 370Z GM M6 Rep Power: 4	Ok thank you, i'll try that and let you know how it goes!

12-07-2020, 06:32 PM	#6 (permalink)
ethan_goode Base Member Join Date: Aug 2020 Location: Texas Posts: 7 Drives: 11 Nissan 370Z GM M6 Rep Power: 4	Hey So I think I might have narrowed my problem down to the two plastic push pin sensor on the clutch pedal. There is one that is pushed down when the clutch is all the way up and engaged and one that is pushed when the clutch is all the way down. And there is a little white plastic stopper that pushes the pin in for each. The stopper for the button that is pushed in when the clutch is out and engaged is about a centimeter to high so the button isn't all the way pushed in. Could anyone check on their z and see if that stopper is centered on the pin?https://www.dropbox.com/s/yrv35sbe60..._3360.mov?dl=0

01-03-2021, 03:11 PM	#8 (permalink)
IBJAMMN Base Member Join Date: Nov 2019 Location: Tarpon Springs Fl. Posts: 15 Drives: 2019 Black NISMO 7AT Rep Power: 4455	On my 2010 40th - Same thing with the Key light - I just pulled the fuse - however, the key light stays on - been like that for over a year - Just ignore the light.