GT Motoring - Challenge Stainless Steel Brake Lines
 

Challenge - Stainless Steel brake lines - All 370Z Models

http://www.challenge-usa.com/images/...370z-lines.jpg

MSRP: $125
Into price: $105 shipped

please PM or email us to purchase nick@gtmotoring.com

This full stainless steel line kit for the 370z replaces all your flexible brake lines on your performance car.

We retained and refined the stock line configurations and mounting points for an OEM quality fit and finish.

Challenge uses stainless steel braided Teflon® hoses. Each line has a clear coating protecting it from any of the elements.

Stainless steel braided Teflon® brake lines will not expand or contract under braking.

This results in a vehicle with less brake pedal travel, without locking the brakes.

All parts and components are DOT approved. Made in USA


http://gallery.gtmotoring.com/d/4256...+lines-web.jpg

still waiting :)

Check other thread.

Uppp

In stock!

Ready to go!

:happydance::ughdance:

Whos 370 needs a holiday gift!?

Stainlessssss

Up!

Nick,

Thanks for speaking with me about these today. I just sent payment to you for two sets.

John

John the two sets will be shipping out today!

:happydance:

:happydance:

:tiphat:

Nick,

Got the brake lines today. They look like they are very well made. I can't wait to get them on my car. Thanks again.

Awesome, take some pics when you install them and let us know how it goes!

:happydance:

:hello:

:happydance::driving:

:driving:

:driving::tup:

:stirthepot:

:happydance:

Modshack and I are going to install our GT Motoring Challenge stainless steel brake lines tomorrow. We'll try to take some pictures and post them this weekend.

Awesome! Thanks!

Yes, awesome!

Wheres the pics Pirate!

In stock!

I'll post some pictures later today. Everything went great with the install except for the rear passenger side. Apparently Nissan uses Gorillas at the factory to tighen all the nuts and bolts on the 370Z. We ended up with a cross threaded end on the hard line that runs from the caliper to the block. It was on there so tight that we could hardly get it off. It may have been cross threaded when it was installed. We ended up having to order a replacement hard line from Nissan. I'm still waiting for it to come in. Hopefully it will be here tomorrow.

As for the Challenge stainless steel brake line kit though fit and finish are first rate and it fits like a glove on the three sides that we finished. One trick though on the rear is to remove the hard line from the caliper before trying to break the hard line loose from the block on the OEM soft line. That way you can put the block in a vice and then loosen the nut on the hard line where it connects to the block.

Pictures of the stainless steel brake line install.

Front Challenge Stainless Steel Brake Line.
http://i852.photobucket.com/albums/a...f/100_7872.jpg

Replaces OEM Front Brake Line.
http://i852.photobucket.com/albums/a...f/100_7878.jpg

Crazy Looking Connector on the OEM front brake line. Not sure why it's made this way as the one piece replacement line seems to be a much more logical choice.
http://i852.photobucket.com/albums/a...f/100_7884.jpg

Stainless Steel Front Line Installed Pictures.
http://i852.photobucket.com/albums/a...f/100_7876.jpg
http://i852.photobucket.com/albums/a...f/100_7874.jpg
http://i852.photobucket.com/albums/a...f/100_7875.jpg

Rear Stainless Steel Brake Line.
http://i852.photobucket.com/albums/a...f/100_7880.jpg

Rear OEM Hard Line (which runs from the caliper to the block at the end of the soft line and replacement stainless steel line)
http://i852.photobucket.com/albums/a...f/100_7883.jpg

Rear OEM hard line and soft line in the vice so that they can be disconnected from each other. It's much easier to remove both before separating them rather than trying to disconnect them on the car.
http://i852.photobucket.com/albums/a...f/100_7881.jpg
http://i852.photobucket.com/albums/a...f/100_7882.jpg

Nice write up thanks!

Sucks about that part being cross threaded :(

Thanks! Finally got the new hard line fron Nissan and everything is now installed. Sucks that a $7 part was holding up the entire process.

The stainless steel lines give the brake pedal a nice solid feel.

:driving::tup:

Awesome. Thanks again for the detailed write up!