34

Funny thing is that I almost ordered the rotors when I placed my ForgeStar order. Glad I held off, hahaha!

27

27

10 more showing!!

The numbers of the pieces that have been removed are as follows:
2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 15, 16, 17, 18, 19, 21, 23, 24, 25, 27, 30, 33, 34, 35, 36, 38, 39, 40, 42, 45, 46, 49, 50, 51, 53, 54, 55, 57, 58, 59, 61, 62, 63

Voting OVER!!! You guys have done a good job revealing what you want and I think even a few of you figured out the pattern ;)

Final reveal will be this evening at midnight, and we will probably post a list of items and the sale prices sometime tomorrow so be ready to scoop up the savings first thing Friday AM!!

sorry but is that bumper in the top left corner not a g37 front bumper?

just wondering as to why no 370z aero we don't want no stinking G crap :confused: :rofl2:

Lol, it is, give them a break, most stuff is the same

What is the 998 bumper?

32

Seriously, all this and all I really need to know is the actual price/discount on the LSD and clutch/flywheel combo. Damn I hate waiting.

What all is in that 400hp pkg? Only things I really need bolt on wise are an m370 and headers...or LTH.

It's not an M370, it's a modified 370Z manifold

http://i79.photobucket.com/albums/j1...ps35b94df3.jpg

Tell them "Andrew the àsshole sent you"

:roflpuke2:

Supposedly people did they today, so... Might as well keep it up, LOL!!!


:tiphat:

John!!!!! Hook my up with that modified manifold and the headers, hahaha!!!!

what does that 400hp kit put down on 91 octane though? Will just the modified manifold be for sale or only as part of this kit?

Whats the Free Harness???

:facepalm: let's say 330WHP AT BEST, so, 385BHP~

It's a wiring harness for the fog light. Makes it easier to install

Dammit I wish I would have had that when I installed mine, I hated cutting into my tail light harness:shakes head:

If they sell just the modified manifold, I would be willing to do a direct comparo to the m370. Andrew, you ever get new tires and your car onto a dyno? You're pretty close to this setup minus their manifold and you're an auto and in CA with only 91 octane. you would be the best third party gauge of this z1 package and its claims.

:iagree: do tell...

Take that baby to specialty Z and see what it puts down!

Lol, I do have new tires. BUT, I have no tune, and I have Momentum headers, not their version. And I CAN make their manifold, I just don't feel like playing with it at THIS moment in time.

I think someone should chip in, lol


JT, won't go to Specialty Z because I already dyno'd my car elsewhere

Well, theirs are supposed to be momentum replicas. We know you don't have their exact whole kit. We just figure you're as close a sit gets so when you dyno wherever, it'll be a good gauge for everyone else.

anyhow, let's not hijack this thread

Z1 headers are the momentum Headers only we changed the head flange for the logo and a more economical cut which allows us to bring them at a lower cost to you guys than Momentum ever could. They are still made by the same manufacturer that built the others and it is obvious the quality is equal. All comparisons we have done between the Momentum headers and the Z1 Headers have yielded identical results however our modified plenum has yielded much better results than any of the other plenums available for the VQ37VHR. The 400hp package is just that. We have made and continue to make ~340rwhp with this setup (with other supporting mods) which, accounting for a 15% drivetrain loss, equals 400 crank hp.

Can you explain how your manifold is different than stock since it's 'modified stock'

Sent from my Nexus 5 using Tapatalk

We have spent considerable amounts of time testing and perfecting the modification so I can't just explain everything we do but I can tell you that we have modified these to either end of the spectrum and are offering the modification that nets the most power. Many plenums have seen their end while we were perfecting this modification. We consider our modification service to be the most powerful, economica,l and safest (for your plenum) plenum modification available.

Is the manifold available individually as well?

We may be listing it by itself later on but not at the moment.

SALES

Infiniti IPL G37 Fascia - $998 – ONLY one available!
Z1 Akebono 2-piece Front Rotors - $498 - $150 off regular price
Stillen Gen 3 Pre Order - $495 - $54 off regular price
CSF Radaitor - $448 - $150 off regular price
Z1 Test Pipes - $199 - $50 off regular price
ARK GT-F Lowering Springs - $199 - $140 off regular price –ONLY three available!
AMS VQ37 Lightweight Crank Pulley - $128 - $62 off regular price
Z1 Headers Pre Order - $795 - $100 off regular price
Z1 Akebono Brake Upgrade Master Set - $1298 - $100 off regular price + $298 upgrade option for 2-piece Front Rotors
Z1 Brake Upgrade Packages - $100 off
Z1 Clutch & flywheel Combo’s - $100 off
Z1 High Flow Cats - $298 - $80 off regular price
Z1 Hood Struts - $64 - $34 off regular price
JDM Reverse Fog Light – FREE Harness
All Z1 Wheel Spacers – 30% off
Z1 Hatch Struts – 25% off
Z1 VQ37VHR 400hp Power Package - $1189 – 20% off regular price
All Z1 Mounts – 20% off
Z1 Stainless Brake Lines – 20% off
Z1 Silicone – 20% off
Z1 Clutch Line - $19 - $10 off regular price
3 pack Nissan Oil Filters and Drain Washers - $18
Quaife Differential upgrades – 10% off
SPC Products – 10% off

All Sales start tonight at Midnight!

What is the "Free Upgrade" on the Z1 oil cooler?

Have the headers been updated with the 370Z flange yet or are 350Z HFC's/Test pipes still required?

Are you guys open tomorrow? I need some of this stuff!!

Yes they are open.


Sent from my iPhone using Tapatalk

Thanks Wonka.:hello:

Whether it be impulse or excitement. This is what I've added so far. Can't wait for the deals to kick in :D
https://scontent-b-ord.xx.fbcdn.net/...b3&oe=5299517A

are there limited quantities on anything? and midnight what time zone?

Same question. I'm looking to purchase the Nissan Motorsports Thermostatic sandwich plate upgrade.