JDM Fog Light install
 

Hey guys new to the forum from G35driver.com
need some help if any one knows how to install the JDM fog light on my 370z and for how much?. I would do it only if i knew a thing or two about wires and electronic wiring components. So if any one can help guide me, I would be much appreciated.:tup:

Welcome! And if you're in the mood and have time?

We're having our local monthly meet in cerritos this Sat, if your interested?

http://www.the370z.com/southern-cali...thly-meet.html


Here's one of many I found

http://www.the370z.com/diy-section-d...p-install.html

Wiring the foglight is relatively easy, even for a person with limited knowledge on wiring.

It all comes down to how you wanna wire it, the easiest way would be hot wiring to your taillights.

For example, i wired mine to turn on while my headlights/taillights are on, and a brighter light when i brake. Evor fog lights have the blink function but you need a seperate unit for that finction.

You will need:
Wire cutters
Screwdrivers (flathead and philips)
Tool to remove the trunk pannels
Sockets (forgot what size) to remove the tail lights
Different wire harness depending on how you want the foglight to function
Wire loom and electrical tape
Tester if you have one since you need to figure out which wire to hot tap to


Pretty straight forward actually. There are a couple DIY threads on how to wire it differently so you might wanna check those out.

Thanks for the info guys, and i will see if i can join the next cerritos meet guys thank's...