Stillen supercharger kit....in pieces
So I have everything here pictured available....the Vortech unit NEEDS to be rebuilt and there are numerous little pieces that need to be sorted out to do a complete install. Definitely not a plug n play situation here and if someone buys this they will need to do some work to complete the installation. I bought this used and I had several pieces missing, but Stillen was VERY helpful and enabled me to order the missing pieces I needed to install in my car.
However I believe the drain plug loosened and drained all the blower lube on a cross-country trip which caused the blower to break. Thats when I went with the VSR single-turbo set up.....now I have all this just taking up space in my garage and I have no use for any of it....if someone doesn't buy this stuff...probably end up in recycling bin :(....oh yeah, also comes with upgraded Turbosmart bypass valve :D $1000 obo? https://lh4.googleusercontent.com/-n...006_172323.jpg |
I'm interested in the turbosmart bov. Any chance I could buy just that? Also do you have the wire harnesses that connect to the tps??
|
I can part out the Turbsmart valve...I'll get some pics and specs on it, then post up. Not sure about the TPS harness though...not sure what that looks like.
|
Ok, its the Kompact Dual Port valve 25mm. How about $115 shipped?
https://lh5.googleusercontent.com/-l...007_160024.jpg |
Also have the 600cc injectors, plenum, support plate, idlers, intercooler set up (pump, core, tank, heat exchanger), pipes, y-pipe, filters, and everything else in the pic.
http://www.stillen.com/superchargers/407770.pdf |
do you can put a list of the things that the person have to buy to complete this kit?? thanks!
|
Anyone know if this kit will work with a 350Z HR?
|
How much for intercooler, hoses, electric pump and intake manifold?
I'll take the BOV at the price posted right now if still available |
Quote:
you'd need different intake manifold, mounting bracket, charge tube(s) |
Quote:
|
What brand are the injectors
|
Unknown....Stillen doesn't specify and I couldn't find out online...I could go out and look at them and see if they have any markings...I'll post up if there are any identifying marks.
|
Quote:
|
I emailed Brian Ellis at Vortech and he advised me to call their Service Department. I talked to a rep there and he advised that the rebuild would start at about $900 for the bearings and some other things, which is all that should be requiring attention. The impellers don't appear to be damaged and from me describing the chain of events with the technician, he feels the same. All one would have to do is call Vortech to get an RMA number for work and send the unit it....return time would be in about 10-15 days.
|
Ill take the kit based on a list of what i need to complete it. Ill pm you
|
All times are GMT -5. The time now is 08:03 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2