Carbon side blade and rear add on, Stillen Fascia and Gen3, Work GS2...(Houston)
 

CNT CATBACK cold start.
HI everyone,
I decided to go forced induction so i am selling coupe parts to help with the funding. All parts are off the car, i am really prefer local sale but i am willing to ship (lower 48 states) at buyer's cost except for the Stillen fascia. Please visit my albums for more detail pics of the parts. You can either pm or text me at 7133676331 for faster respond. Thank you. Happy shopping guys :tup:

1. Stillen Fascia: SOLD. I just bought this bumper last month and had it paint Platinum Graphite and matte black. The bumper has add on fangs and grills from Stillen. It also comes with the replacement windshield washer bottle. Left side has 2 inches haircrack on the paint due to the 3 pieces design from Stillen. I will not ship this so this only available to pick up in Houston.

2. Stillen Gen3 Intake: SOLD. I had this in the car for around 9k miles. Normal small scratches on the tubes from the install and remove off the car.

3. AeroJacket carbon fiber side blades: SOLD. I had this on the car for around 5K miles. Left side blade has about 5 inches long crack on the clear coat (not crack on the carbon) which cannot see unless kneel down and really look for it.

4. Evo-r rear spats: SOLD. I had this on the car for around 3k miles. They have normal light scratches from rocks flying on freeway and each has 2 small screw holes from installation.

5. Evo-r rear diffuser: SOLD. I had this on the car less than 3k miles. it has two small screw holes from installation.

6. Work Gnosis GS2 Wheels, Tires, and Volk racing lug nuts (TPMS included): $2100 shipped, $1950 pick up. 20x9.5 offset +20 front and 20x11 rear offset +15 fronts have a 3" lip and the rears 5" lip these wheels were special made for the 370z sits perfect. I had these on my car less than 2k miles. Work GS 2 with venaci hub caps. I had them paint gun metal and red screws to match with my brake caliber. No rash, no bend, only small paint chipped on the lug holes from install and remove from the car. They are clear the big brake with no spacer needed, very flush with fender without any rubbing at all. The front tires are Falken Fk452 255/30/20 have about 80% left. The rear tires are Hankook V12 305/25/20 have about 80% left. The Volk racing lug nuts are amazing, I was amazed how much lighter they are compare to the factory lug nuts (about 1/3 of the weight).

7. CNT catback exhaust: SOLD I had this on my car for around 9K miles. Sound great, not too loud. It can be loud when you step on the pedal and quite while cruising in the neighborhood. All the nuts, bolts, and gaskets are included.


8. Tommy Kaira Shift Knob: SOLD. This is truly a piece of art.

Dude you are my savior...I want that bumper, and my color, and local. I think I asked you about stock bumper a few weeks ago, lol. Question tho: Do you think I'd have any issues fitting a intercooler behind it, or would I need to trim it at all? IDK how the stillen bumper fits.

Those wheels! Would trade mine in a heartbeat for those. Glws!

dibs on side blades! you have text and PM!

I'll take the lugs. PM sent

need blades. will paint them anyways. second if dibs bails. shipped tho to 11358

I don't think anyone has had an issue with that. I've seen multiple intercoolers behind numerous facia, including the Stillen. There is a lot of room up front.

Carbon side blade and rear add on, Stillen Fascia and Gen3, Work GS2...(Houston)
 

More concerned with the brake ducts in the back, hitting the piping on the GTM kit. http://img.tapatalk.com/d/14/08/05/a6u7asyd.jpg

Found this, but it looks like trimming was involved on the ducts. http://img.tapatalk.com/d/14/08/05/y5ype9ud.jpg

I'll still take it.

OP did you sell your Z?

Nope. Just going for turbo kit and need some funding :)

I might go for amuse kit after the turbo

willing to drop spats? I can get new from Aerojacket for $175

Are you sure they are carbon fiber? That is much lower than what i got them for lets me check, if it true i will drop the price. Thank you for the head up.

my bad post didnt say CF. just says rear spats. its 175 for FRP 275 for CF. However im not looking for CF specifically GLWS

Wish I would've seen this earlier. All the parts I wanted are gone :( GLWS!

Yes, they gone fast :) only the exhaust is left, make me an offer :)

I totally texted your listing to a friend who is buying 2 of your items!

+rep freely! =p .

also impressed how fast everything went.

Do you happen to know how much the center Stillen Gen 3 CAI silicone couplers measure in diameter?

woooohoooo side blades to me!....

by the way, are the wheels still available?

Did I make the cut for the spats?

2.50"http://img.tapatalk.com/d/14/08/05/y8e8abys.jpg

I'm very interested to know why ANYone would have authentic WORK wheels, but intentionally put Venaci hubs on them, who "replicates" both WORK and VOLK wheels.

What disc sizes are the wheels???

Please post up the inner barrel with sizing sticker/engraving. Thank you

Carbon side blade and rear add on, Stillen Fascia and Gen3, Work GS2...(Houston)
 

Venaci originally teamed with Work wheels on certain designs to sell here in the US...with different paint schemes and center caps. They aren't replicas, they are rebranded Work Gnosis GS2's. They did the same thing with Varianza T1's. That is before they went out of business or whatever happened to them. Bad customer service and shipping.

yes, I am well aware. They also sold their wheels for cheaper then WORK (4-500 a set), and then fell off the map as they went out of business. They used to absolutely blow this forum up a few years ago.


Anyways...back on topic, can I just get a photo of the inner barrels? Thanks!

Carbon side blade and rear add on, Stillen Fascia and Gen3, Work GS2...(Houston)
 

Yup! Varrstoen makes straight up replicas of Work and Volk wheels.

When i bought these wheels the previous owner already had the venaci hub caps put on them. I kind of liked the lining on the hub caps and didnt want to pay extra money for the Work hub caps so i decide to keep them on. I updated more pics which can close up and see the Work letters engraved on the wheels. Thank you

3 inches on front and 5 inches on rear for the discs sides

Do you still have these, or did they sell?

Thanks,

Chris

Everything sold except for the exhaust, pending on the wheels and shift knob. Thank you.

Wheels are back forsale, TK knob sold. Thank you.

Sorry, but I'm not looking for the "engraving" on the outside of the wheels. I'm looking for the actual sizes/offsets on the inner barrel of the wheels. Should show the wheel sizes, widths, and offsets of the wheels.

I will take more pic when take the wheels off tomorrow.

Wheels are off the car. I took the Volk Lug nuts and inner side pics of the wheels with the offset like requested.

haha, sorry bro was trying to help you out, but you clearly don't know what I'm referring to.

On the inner barrels, WORK used to engrave/brand, now has stickers of the full specs of the inner

example of mine...(offset, disk size, and wheel width)

http://i1305.photobucket.com/albums/...ps2e370124.jpg

Thank you bro. I did took the two pics exactly the same with yours, it just that the valve was right on top of the letters :(

If they clear the Akebono BBK, then the fronts are usually (R-Disk) and rears (O-Disk). For ex. my GS2's are 20x9.5+25 (R-Disk) and a 20x11 +18 (O-Disk). His offsets seem a little more aggressive at +20F and +15R.

Its the other way around. They used to have stickers on the barrells and now are engraved.

R.K.

In the one pic it clearly says (R) +20 front.

The other pic says (O) +15 rear.

R.K.

Bump, wheel set still available. Make me an offer :)

Only Wheel set left, thank you for all offered and all pm are replied.