Setrab Oil Cooler setup
 

.............

$450 picked up. $485 shipped in USA

when this is installed what does the temp average with spirited driving?

^ i did not install it as I stated in the first post.

there are a lot of factors that play into your engine temps.. air temperature, city driving vs. highway, traffic vs. no traffic.. I'll say this, no traffic on the highway going about 70mph+, outside temp 65+, you're looking at temps 170-180 degrees +/-

All this is subject to change, with those factors changing.

$485 shipped in USA

$480 shipped

I have the 34 row version and my temps during spirited driving will sometime nudge just above 200°F, but not much.

Thank you all for the input ^^

$480 shipped

$480 shipped

$470 shipped

$470 shipped

09 Sports: Ave temp for me so far is about 180-200 with temps to 84 outside. Was running 220.

Doing 2-3 pulls to redline and back down to 10 bedding in brakes, I did that about 10 times and saw temps of up to 225 or so. Previously this car would have shown me temps of up to 240-255 for that kind of abuse.

Very happy with this kit. If you like to drive even relatively hard I would suggest you jump on it. My car had shown me that it ran hotter than some here. so I chose the 34 row with the thermo.

JT

What about the other parts needed highlighted in red below ?
I have FI but have not bought a cooler yet

The Z1 Motorsports Oil Cooler Kit features the following components standard:
•1x 19 Row Oil Cooler Core (Mocal Standard; Additional sizes and Setrab available)
•1x Z1 -10 AN SS Oil Cooler Line Set (Optional protective sleeving available pre-installed)
•1x Mocal Sandwich Adapter (Non-Thermostatic Standard; Optional Thermostatic model available)
•1x Setrab Oil Cooler Lower Mount•1x Z1 Motorsports Oil Cooler Upper Mount
•1x Z1 Motorsports 370Z Oil Cooler Install Hardware Kit
•1x Z1 Motorsports 370Z Oil Cooler Installation Instructions
•2x Setrab (-10 AN to 22mm Port) adapter fittings (Cooler)
•2x Mocal (-10 AN to 22mm Port) adapter fittings (Sandwich adapter)
•2x 13/16" Rubber Seal (Sandwich Adapter)
•1x Power Steering Hose Spacer

Let me take more pics. I do not know most of them looks like cause I never installed it.
But my friend took everything off and put it in one box so Everything should be there to install the kit.

THe sandwich adapter is there. You are looking for two l shaped brackets that are about 1.5 inched on each side of the L (That's the upper bracket)

The power steering hose space ia about a 3 inch piece of hollow Delron plastic diameter is about .250 or so.

The hardware can be picked up at local hardware and all the fittings are on the hoses except for the ones on the sandwich adapter.

Thanks for the info.

Bump

$470 shipped

Man Kev, If I hadn't just bought it before I spotted this thread my friend! :hello:

JT

Hahaha should have posted long time ago.... lazy me :bowrofl:

$470 shipped

$460 shipped~~~~

$460 shipped~~~~

$460 shipped~~~~

$460 shipped~~~~

$460 shipped~~~~

$460 shipped~~~~

$460 shipped~~~~

$460 shipped~~~~

$400 shipped

Wow! I can't believe someone hasn't snatched this up. This is a $640 + shipping kit from Z1

And this one member keeps low balling me.
Gave it to my friend for cheaper price.