bump,,, most PMs comes from new account mostly with barely more than 3 posts...

Probably some peoples on the forum that wish to stay incognito ???

Free bump -- seriously, like 30 whp and amazing sound for less shipped than the cost of most cat backs.

Somebody jump on this.

I'm thinking about it, what extra hardware do I need besides manifold gasket, header/exhaust gasket and extenders? Will stock bolts work?

You can re-use your OEM metal manifold gasket (engine to header) , this is not an issue.

I provide 2 new gaskets 2.5'' for the header to Y-pipe/H-pipe.

Also 1 plug for the added sensor bung in case you aren't using an aftermarket sensor (AFR).

The extender you will have to call PPE *faster* for this which will take 3 mins of you time and 26$ later they will ship it to you or email them *they accept PayPal*


this is why I'm selling the LTH at a low price of 925$

I received 2 PMs since my last post but still available !

Bump !!

Im very suprise they havent sold yet ... is the economy that bad ?

Yes.

yea = /

what is the labor time usually involved in a header install?

if you never done it, anything between 6 to 12 hours including some break time ..

is it possible with basic tools and ride on ramps? Or am i better off taking it to a shop because of problems with bolts breaking?

the only bolts that will give you the biggest headache is the daemon bolts as they call it here..
Bolt header to cats are the worst then the rest it shouldn't be a problem.

as for tools , you don't need any specialized tools and yes you can do it with jack stand. This is what I've been doing for years without a lift.

you might want to take a look at those DIY header install ;)

First time me by myself on jack stands like 4hrs driver side, 1hr passenger.

Thanks guys! Im still thinking about these.

Sent from my HTC One using Tapatalk

Don't touch the demon bolt. Take the header and cat out as one. Losen the two nuts on the motor mounts and tranny mount and lift the engine with a jack. Don't touch the steering shaft either. It would take half the time with a buddy getting tools so you can stay under the car.

got 2 PM since the last time I posted and still no sale !

Read those answer that I keep getting question for.

- Yes they will come with 2x gasket 2.5''
- It comes with bolts to your X-pipe/Y-pipe/H-pipe
- You can re-use your head to headers metal gasket.
- 3 mins of your time to call PPE for a wire extension for their PPE LTH on the 370z, they sell it 26$ shipped in the 48states from what they told me in their email .
- No I didnt get any cell with it
- No you dont need a tune. but I recommend it to optimise your gain.
- It comes with a plug for the aftermarket sensor bung.
- Yes you can do it youself in the parking lot
- Takes 4-12 hours doing it depending on experience.
- I dont know your states law about if its legal or not.
- No I wont go lower than this
- No they arent rusted
- Yes its better than stock ! *in term of power add-on*
- Yes it can fit the Nismo 370z
- If I sell them, you will see an Update from me on the sale thread saying they are sold !
- First guy to give me the $$ with paypal gets it , no hold !!!
- Proper headers Heat wrap > coating. Im not reducing anymore the price because the coating is peeled with because of heat wrap.



oh,,, Bump ! ;)

so somebody sold his FI LTH , his asking price was 1200$ for a LTH that is not optimized to give better whp than the PPE got sold ???

It seem like people are more into brand name popular on the forum than to have better product that was not advertised here on the forum...


anyway still the same price and not sold

925$ shipped

Free bump.

I can't believe this hasn't sold...

If these didn't replace the Cat Convert I may be interested. I think that might cause me to fail the emissions here in the States not sure. Anyone? I am putting an Amuse R1 Titan CB on my car in May when it arrives. Wasn't planning on going all the way but if I will still pass emissions with this on my Z I may be interested.

His are brand new still in original wrapping so not an accurate comparison here.

Either way Glws

Sent from my SAMSUNG-SGH-I747 using Tapatalk

I give you that point no problem,

but its not like a year of usage is degrading the Stainless Steel pipe , the peeling of the coating on those does not affect the SS integrity.
Its not like its apparent from outside the car anyway...

but again we dont have the same opinions on buying parts...
for les money he could have got a better optimised headers but if peoples want a popular brand name from the forum.. go ahead

your point is still valid

Once someone buys my exhaust I'm going to buy this from you if you still have it

Still the same price !

925$ and its yours !! ;)

I feel lucky today!

Bump! ;)

selling at a very low price of 925$ shipped !

Bump!

Morning bump !

Who want 23 - 35 whp at 925 $ ??? :yum:(depending on your current exhaust and tuning)


unless you prefer an exhaust at 1500$ for 15whp ?

Morning bump !

Who want 23 - 35 whp at 900 $ ??? :yum:(depending on your current exhaust and tuning)


unless you prefer an exhaust at 1500$ for 15whp ?


First post has been edit to show the extreme low price of 900$ shipped
This is the most lower I will go unless you pick it up yourself if you happen to live close by.

keeping an eye on these

Who want 23 - 35 whp at 900 $ ??? :yum:(depending on your current exhaust and tuning)


unless you prefer an exhaust at 1500$ for 15whp ?


First post has been edit to show the extreme low price of 900$ shipped
This is the most lower I will go unless you pick it up yourself if you happen to live close by.

If i had a block for my car i would buy this from you.
it will work great in my 1/4 mile run

Who want 23 - 35 whp at 900 $ ??? :yum:(depending on your current exhaust and tuning)


unless you prefer an exhaust at 1500$ for 15whp ?


First post has been edit to show the extreme low price of 900$ shipped
This is the most lower I will go unless you pick it up yourself if you happen to live close by.

I PM'd you. respond when you can

I sent you a reply,



Still for sale !

Buy these headers and sell me your stillens cheap! :tup:

PM'd. only thing Im worried about with the LTH is passing inspection..is there a way to pass inspection with these. I cant be removing every year when inspection time comes...that would get pretty expensive.

What sort of testing do you have in your area? OBD, visual, sniffer, something else? Depends what you have there. We have OBD tests so people pass all the time with long tube headers as long as you're not throwing codes. As long as it's not sniffer or visual you should be fine. That's how it is here

wonder how these sound paired up with a Motordyne E370 ... hmmm

We have everything!!! Sucks I know. Sniffer, visual, codes, ...not good

It sounds absolutely amazing!!! No rasp, I've gotten nothing but complements on it. It's loud, but definitely not overbearing.

I was worried about this as well. So a car with these headers will pass in IL as long as no codes are thrown? . How hard is it to get rid of the check engine light with these headers?

Yes! These headers will pass just like the FI headers will pass. It's rare that codes are thrown unless the install is done wrong. I know at least 3 people in IL that have either these or FI and they've had no issues with codes or passing emissions. Buy them, take it to a shop and you'll be fine.


Sent from my iPhone using Tapatalk