Nissan 370Z Forum - [For Sale] AE Performance 72 Row Oil Cooler

Reposting as the sale did not go through. I am having the heat exchanger touched up, pressure tested, mounting tabs realigned, and cleaned by GTM. See below for full details about the oil cooler kit, this a complete unit. After this is completed by GTM, I will update with those pictures. This should be familiar for anyone who viewed my last sale thread. Feel free to throw me offers. This will ship directly from GTM, please don't bother them about it, they are doing me a favor by shipping it for me. I give them your address, they bill me for the shipping.

Paypal fees and shipping (Conus) now included in pricing ($50 savings)

Used AE Performance 72 Row Oil Cooler
Sold!

Setrab Series 1 72 row heat exchanger
-8AN lines and fittings (see below for reasoning, and easily converted to -10AN for track rats)
Sandwich plate (non thermostatic, and unnecessary in most cases with this unit, again see below for more info)
Mounting bracket

Don't let your engine go limp, keep it's rev boner hard with my 72 row oil cooler! 72 Row series 1 Setrab oil cooler with -8 AN fittings. This is $1099 brand new. It is a seriously expensive oil cooler. For the Setrab piece alone is $681. There is no thermostatic plate. I used in Las Vegas and it worked flawlessly. Average oil temps in 110+ weather was a perfect 200 degrees. Temps 60 and below, were below 170. Block off plate or thermostatic plate recommended if you live in a place that snows. I REALLY do not want to get rid of it, but again, it does not fit with my kit. It's priced similar to a new 34 row with thermostatic plate. I think it's fair, I know it's not cheap, but you can't find better unless you run two 25 rows or larger. These pics are not current, but will look exactly as shown. Was on the vehicle for about 7k miles. Asked GTM to send me some.

A small tidbit because I want this oil cooler to sell, here are the specs comparing the 72 row, 34 row, and 25 row oil cooler since the row count can be deceptive as the surface area and thickness really count, and of course placement. Prices can be found cheaper, I pulled from the same store to maintain consistency. As to why they use -8 AN instead of - 10 AN; "On our car we ran larger lines, but we had a bit too much pressure drop, and it took much longer for the car to heat up on the street. Also overall pressure was a bit too low for our comfort w/ the stock oil pump. The -8's corrected this issue without much sacrifice in high temp cooling." From M.Bonani's Project Thread
Link to my review
http://www.the370z.com/engine-drivet...er-review.html
Link to AE's oil cooler intro page that has a lot of good information
http://www.the370z.com/ae-performanc...ooler-kit.html

Setrab Series 6 25 row

Part #: 50-625-7612
Width: 12.99in
Thickness: 1.875in
Height: 7.6in
PSI: 2.0/2.5
BTU/HR: 33,100-46,000
HP Range: 325-425hp
Fin Area: 72.13 sq in
Price: $264.99

Setrab Series 6 34 row

Part #: 50-634-7612
Width: 12.99in
Thickness: 1.875in
Height: 10.39in
PSI: 1.7/2.2
BTU/HR: 43,000-59,000
HP Range: 400-475hp
Fin Area: 99.21 sq in
Price: $384.99

Setrab Series 1 72 row

Part #: 50-172-7612
Width: 8.27in
Thickness: 1.875in
Height: 22.13in
PSI: .8/1.0
BTU/HR: 40,000-60,000
HP Range: 600+hp
Fin Area: 106.2 sq in
Price: $679

1st set of BTU numbers are wet sump/2nd set of BTU numbers are Dry sump.

Here is a reference list used for information:
https://www.pegasusautoracing.com/pr...asp?RecID=8949
https://www.pegasusautoracing.com/pr...asp?RecID=8951
https://www.pegasusautoracing.com/pr...asp?RecID=8940
http://www.setrab.com/uploads/media/...OM_english.pdf
Setrab Engine Oil Coolers | susa

If you haven't read through the links I posted, take your @ss back to the top and click on it :) Buy this thing, It's F'n amazing!
I don't think I can do much more to justify my asking price. This is seriously more information about a single classified sale item I've ever seen. Please PM with offers, will consider trades.

http://www.the370z.com/members/ss_fi...oil-cooler.jpg
http://www.the370z.com/members/ss_fi...il-cooler1.jpg
http://www.the370z.com/members/ss_fi...oil-cooler.jpg
http://www.the370z.com/members/ss_fi...oil-cooler.jpg