GTM Stage 2 Turn Key TT Kit
 

****I believe the intake piping is different for the Z, so buyer be aware that it will require some modification.

Asking $6500


Ok so as you may have seen this kit was originally listed as a stage 1 and I was upgrading to a stage 2. After removing my original turbos I noticed them being the same size. I have called and confirmed with Sam@GTM that the turbos I had were already the stage 2 components. So this kit is now being re-listed as a stage 2. My loss is your gain, this is a great deal on a great kit with a lot of new pieces. I will lay the entire kit out if it does not sell before I have time to do so. But here are some pictures to show that both kits contained the .86 a/r stage two turbos, good for up to 700hp according to GTM.

http://farm8.staticflickr.com/7290/9...c9d67889_b.jpg
http://farm8.staticflickr.com/7375/9...494d3bce_b.jpg
http://farm8.staticflickr.com/7363/9...33e0e3f9_b.jpg


If anyone is interested in it, I can have the pipes powdercoated whatever color you want for $150 and the BOVs for an aditional $75.

Retail on this kit is $8495, save yourself $2000 for a kit that is barley used.

Below is a description of all the components of the kit :
Cast Ductile Iron Exhaust Manifolds And Turbine Housing *NEW
Pre-Bent Stainless Steel Heat Shields *NEW
Exhaust Manifold Install Hardware Kit *NEW
4-Ply High Resistance Nomex Silicon couplers
Stainless Steel T-Bolt clamps
3.5 x 13 x 24 Bar and Plate Core Intercooler Rated 1000hp
GTM Steering Coupler *NEW
Polished Stainless Steel and Tig Welded Piping **Custom Powdercoat Available
Pre-made steel braided oil and coolant Supply & Return lines
Garrett's Twin ball bearing water & oil cooled turbocharger
Cold Air Intake System (using k&n filters)
TiAL 50mm Blow-off Valve
HKS Internal Wastegate Actuators
All Necessary Hardware and Installation Instructions
GTM Custom mapped plug-in And play engine management for optimum engine tune and power .
GTM Basic fuel system with Denso 600cc Injectors and Walbro 255 Fuel Pump

BRAND NEW HKS EVC-S EBC for $350 more!


As we all know GTM has a great deal on the MHI kit right now, however they are inferior journal turbos, not the Garrett dual Ball Bearing turbos.

Hard to get pictures of it but everything you need to bolt and go will be included. And the GTM instruction manual as well.

http://sphotos-a.xx.fbcdn.net/hphoto...17542935_n.jpg
http://i19.photobucket.com/albums/b1...ps423bb154.jpg

Please post the asking price.

Nice kit GLWS! How much?

My bad copied over from MYG37 and they have a different format for the buying price. Fixed.

Bump for a legit, honest, and respectable seller. Kit is pretty much brand spankin' new!!!

Thanks lance, also guys I'm always open to trades +cash, wheels or other pieces of value that I can turn around and sell to make money back on the difference.

Legit and honest seller. GLWS :tiphat:

Thanks Guys!

...

Yes I was, not sure what you mean by the injectors, pm me? Keep the for sale thread clean please :) bump!

monday bump.

To what extent do you think the intake piping needs to be modified to fit a Z? Is it just a matter of making it turn inwards towards the intercooler? I also have a G37 TT kit that I'm going to try and retrofit on my Z, but do not yet know how much modding would be required. GTM hasn't provided much assistance either, other then stating it's different and offering to sell me all new pipes. If you know, it may be useful info for your sale thread here. GLWS!!! Sorry if that's a dumb question.

Judging from the pictures the only difference I can see in piping is the intakes with the filters attached. The G they turn outwards into the wheel wells, while the Z they turn inside the FMIC pipeing and sit beside the intercooler. The pictures below you can see the rest of the piping coming around the front end looks identical.



http://i313.photobucket.com/albums/l...O/P1070718.jpg

http://www.the370z.com/members/dembf...front-view.jpg
http://www.gtmotorsports.com/images/D/P1060867.JPG

This is the turn that will need to be modified to turn in where the G is straight

http://www.gtmotorsports.com/images/D/P1080494.JPG


***Note the BOVs on this kit are located in the engine bay up top, I do not know why some kits they are mounted in the bumper, and others they are in the bay.

Turbo Tuesday bump

Bump for a local!! I have a 370 and this post isn't helping me at all lol. Glws!!

Local huh....I could cut a good deal for a local if your interested

Hmm. I'm definitely interested haha. Ill pm you my number

Humpday!

Also I do have a Prosport Manual Boost Controller I will include with the kit that I forgot I had.

Well..updated first post, turns out this was a stage 2 kit, also can include a BRAND NEW HKS EVC-S EBC for $350 more!

bump....

Payday bump... Lets make a deal!

If anyone wants this without the uprev I can keep it and save you some $ if you already have the cable and licensing. Also might be willing to knock some off and keep the piping, if that sways your wallet in the right ddirection.

Rocking deal, free bump.

Thanks! Needs a new home asap.

Boooost!

Sale pending till July 14th

So it's basically spoken for for two weeks? PMd you though anyways DPE feel free to get at me man.

I have a deposit on the kit that will expire on the 14th.

Sold. Lock it up

Congrats buddy!