Stillen Fascia - oil cooler
 

You can see pics of the fascia in my album. I have already begun returning the car to stock and will be parting with it soon but will be leaving the sway bars in place.

***Stillen Fascia - $650/obo picked up. LOCAL SALE ONLY - Too big to ship and I'm not driving it to you in the Z. Color is KAD (Gunmetal).

Already painted but for this price all the prep work is done so even if you wanted it a different color you'll come out ahead. So just fit it, sand it and paint. I have the fangs and the mess wire inserts that will come with it. Fangs are matching matte black as is the mid-section. The wire has been cut to accommodate the stillen license plate bracket. Only $70 for the new, unaltered replacements if you so desire.

Has approximately 2,300 miles on it. Paid over $1,600 for the fascia, prep and paint. Easy mod but get a good body shop to fit it to you car just in case you run into issues. If I were to do it again I would have them plastic weld the separate pieces. No matter what direction you take you won't spend nearly as much as I did to get it to where it is now so no matter what you will be ahead. As I said, even though it is complete, get a body shop to install it! I am not going to be held responsible for an improperly fitted piece.

***Also have a Setrab 25R oil cooler with thermostatic sandwich plate for sale. (Part of the GTM oil cooler kit.) Approximately 800 miles on it. The lines will not be included as I pretty much demolished them during the uninstallation process. The cooler itself is in good condition. I will include the fittings but no lines or terminations! - $265+ shipping. Kit typically goes for $530 shipped. Hoses aren't that expensive. I'll try to get pics up soon. It's an oil cooler. 800 miles and a few bugs. Other than that it is still pretty much new.

Shipping to contiguous 48 states only. Fascia will be on vehicle only for a few more days and then it will be available for immediate pickup.

Hit me up with offers. Low-ballers, you know who you are... dont' bother.

R/
John

Dam...I would be all over the fascia if you were within 6 hours drive from Houston. Great deal. Glws!

you wouldnt happen to have the skirts would you?

I do not.

Pm sent for oil cooler

Dang thats too bad. Alright well GLWS man, they should go quick :tup:

oh man, you won't grey hound freight that bumper??

thanks!

Got it.

If you really want to pay for it, it can be arranged. However, I will need to price out packaging as the box will need to be made quite large and figure out where it is going to go. If I need to rent a truck to take it to greyhound that is an extra $80 minimum. Additionally, time. I don't have much of it. It can get messy quick. But if the buyer is willing to pay the final price and understands it will take time to get it shipped then anything is possible. Hit me up a pm and we could work out the details. This also goes for khanhvu411 and anyone else interested. Thanks.

any chance you meeting me in roanoke rapids nc for full asking price?

I strongly suggest against using Greyhound. I just shipped a Z32 TT front bumper cover from Santa Ana, CA to Minneapolis - I only went with G/H because that's what the buyer wanted me to use (to save money I presume): $76 in cost.

Counter clerk tells me it'll take about 3 ~ 4 days to get there. I ask if there's a tracking number and get a blank stare. Grab my receipt and head back to the office. Go online and see that my receipt has a waybill number that can be used to track the shipment. I enter the number and get "no info found". For the next two days, I check the tracking info and get the same message.

After 3 days, I call Greyhound and get put on perpetual hold. I send an email asking for info on tracking the shipment and have yet to get an email reply. In the meantime, the buyer is getting impatient. The following day, I call again to Greyhound and finally get through. I'm now told that the shipment will take between 7 - 10 business days and that because I'm sending an automobile bumper, it could take even longer depending on available space. I ask how can I track this shipment and she tells me they haven't fully implemented their tracking system yet, so I need to call back every few days (she left out the part about I'll be left waiting on perpetual hold every time I call - I'm sure that it slipped her mind). All she could tell me was that the bumper cover left Santa Ana but she can't tell me where it is now....


Dave

Still need to rent a truck and figure at $0.89/mile for the rental + minimum price and fuel. That'll bring you over $1k pretty quick. If you have a truck or know someone that'll let you borrow one I would strongly recommend going that route and coming here.

Thanks for the heads up. I usually try to take the best route possible in terms of safety for the part and for each party. However, if someone REALLY wanted it that bad and was willing to pay the extra expense in having me box it and ship it, they'd be well warned and my responsibility for the part would end when it leaves in greyhounds hands as it is not any preferred method of shipment I would ever advise to use. Hence, the local sale.

I ship (body parts etc.) with Greyhound all the time across country and never had an issue ;)

John (Tigger) is a great buyer & seller. Buy with confidence!

I would have snagged it from him if it was in KAV (40th color). Glws!

Thanks!!!

And a quick update... The fascia is off and currently sitting at the body shop awaiting pickup. First one with a truck to Virginia beach gets it.

Oil cooler is still available at this time.

R/

Sunday bump. Parts still available. Hit me up with offers.

Fist bump.

Bump

Bump. Cooler and fascia still available.

Happy Independence Day!

Cooler and fascia still available.

Bump!

pics?

Want this bumper but, paint and color doesn't matter too me since it'd be wrapped. You ready to come down in price and ship?

You can go to my album to see the fascia installed on the vehicle. It has maintained residence at the body shop since removal so I can't snap any new pics. The color as seen in my album is on the yellow side and it was subsequently repainted for a better match and they did very well. The middle section is still matte black.


Shipping CAN be done but it won't be cheap even straight up the coast. For the price? I spent $707.31 to get it bare bones from stillen with the cooling duct fangs and the wire mesh. I spent another $700 to have it finished. To put it simply, I'll be happier hanging it on the wall of my new garage for the rest of my life than come down any more in price. So uhhhh... yeahhhh. lol. Choice is yours.

Can get it new from Z1 shipped for $650. Thanks tho.

Painted Stillen front fascia completed with fangs and mesh is definitely a Steal at this price!

Then buy it from Z1 and finish it yourself. I couldn't care less.

Bump. Fascia and cooler still for sale.

Friday Bump! cooler and fascia available.

buuuump

Interested in the 25r oil cooler. Any pic you can text me? Does it use the stock oil filter? Does it come with all the brackets and bolts?

Hello Tigger! I recently bought the Stillen Front Fascia also and I'm curious to know how come you spent over $1600 just on the bumper?

I got the bumper for $576 and I'm guessing the paint/install shouldn't go over $600, so shouldn't the final price be around $1100-1200 approx?

Any feedback would be much appreciated!

Thanks

Jimmy

Add the Fangs ($100) + Mesh ($70) + paint + perfect fitment/installation cost.

A good quality paint job & perfect fitment will always cost more :tup:

(Once you finish the paint job and install the Stillen fascia you will understand)

There will be gaps where the bumper meet the headlights and that's when you need a professional to make it perfect.

Tiger must wanted the best work for his car that's why it costs him $$$$$.

pm sent

Bump. Still for sale

anychance that you will drive 2 and half hours to deliver?

I have nothing to deliver with otherwise I would certainly do it.