CupcakeZ 370z Part Out (Sadly!)
 

Cupcakez 2015 370z Base Coup Part-out Sale!

--- Please Post / PM / Text me offers for the following items for when I do part this beast out with all still new parts, as I do not know correct pricing for when parting out parts of a vehicle. Last time I posted, I was pretty much flamed for the prices I opted for, so please offer so I know a ballpark. I am willing to negotiate!

NOTE: I am new to selling pieces due to a part out of a performance vehicle. This is my first car I've ever purchased, but sadly needs to be parted out, as I decided to go a different route for a different vehicle. :) All offers are welcome, please be respectful and kind, and reasonable.

Thank you!

If this post needs to be removed because I do not have a solid pricing on the pieces, then I understand.

Otherwise, the following is what I have to offer + Anything stock that wasn't damaged in the car accident (Which is a lot of things actually) -- Just ask!

*** I am just waiting for the insurance company to deem it totaled and then I can buy it back, and start parting it out for people ***

--------------------------------------------------------------------
Stage IV IPP VQ37VHR Crate comes with:
- New Timing Chain kit @ (875 miles)
- New VVEL RH & LH @ (875 miles)
- New ATI Super Damper Street Crank, 5.5" @ (875 miles)
- New RJM Closed Deck VQ37VHR Block @ (875 miles)
- 1050x ID Injectors w/ Plug & Play @ (875 miles)
- (x6) NGK DILKAR8A8 Spark Plugs @ (875 miles)
- Jim Wolf Technology(JWT) Exhaust Cams
- JWT High RPM Valve Spring
- JWT Valve Spring Shim
- JWT Extended Cam Sprocket Bolts
- JWT Cam Sprocket Bolt Washer
- JWT Rear Camshaft Bolt
- JWT Cam Bolt Seal - Copper
(All JWT are @ 875 miles)
The rest of the details for the engine is listed in the attached screenshot.

- Stillen Manifold (If you want it, otherwise I can remove it for you if you have a manifold already to use) @ (6k miles)

***Retail Price: ~$13,000+ USD ***
- $3,000 RJM Closed Deck + Added crank
- $9,000 Stage IV IPP Spec Block
- $1,000 VVEL RH & LH
- $400 Timing Chain Kit
- $375 ATI Puley
- $750 1050x ID Injectors

===============================================
Quaife LSD 1.0 w/ Pumpkin, already assembled @ (1.5k miles)

***Retail Price: ~$1250***
===============================================
TopgunZ A2A Kit [+] V3 SCi Blower @ (875 miles internals ;, Blower shell & Bracket is 6k miles)
- Fully installed 928motorsports supervortech internal upgrades (928 Impeller, HSS Bearings, Seals, etc)
- Optional to add Vortech Supercharger 3.0" Pulley & Stillen 9PSi pulley
- Comes with A2A Installation instructions!

~ Willing to separate the kit & blower if needed, but prefer to sell as a discounted package ~

***Retail Price: ~$5,500***

===============================================
Specialty Z 4BAR Omni Sensor @ (875 miles)

***Retail Price: ~$150***
===============================================
The ECU component inside this vehicle which contains an ECUtek license, and I already paid for a full blown tune as well -- so this will automatically go to anyone who purchases the engine, or topgunz a2a kit & blower package, or all 3.
I would definitely recommend someone take advantage of this ECUtek paid license and tuning, please do not let it go to waste.

Otherwise I am willing to sell the ECU component to anyone who wants a pre-paid ECUtek tune already; I can include the bluetooth dongle & cable as well.

===============================================
Zeitronix E85 Sensor Kit (0 miles) -- Never installed yet

***Retail Price: $250***
===============================================
KW V3 Coilovers @ (1k miles)

***Retail Price: $2,200***
===============================================

Interested in the a2a supercharger. Where are you located?

Located in Elk Grove sir.
You just want the a2a kit or the whole package, a2a and supercharger blower components (928 upgrade internals)?

Can you just hold on to all of this until early 2020 when i get back from deployment and have enough money saved up?

Sent from my LG-H918 using Tapatalk

You trying to sell your front bumper? I live in sac so I could pick up.

Hi, do you have the steering wheel airbag?

Ehm...

I cannot tell if you are serious or not.
Did you really want to purchase all of these items?

Early 2020 huh...I mean I /could/ but I would have to somehow get a solid serious confirmation from you to be able to hold on to these for you.

Like maybe a deposit of a certain amount that I hold on to until you purchase it and then it gets returned, or something of the sort.

I'll be honest, I mean I could just sell you the entire car for a pretty hefty discounted price and you could have everything in it ; just need to part it out yourself would be the only thing.

But again, I would have to have a solid confirmation that you would follow through with this and purchase all of it.

What are your thoughts?

You could PM me, post here, or text if that's easier.

BTW thank you for serving for our country (assuming that is what you meant by deployment)!!

o7

1 916 667 2929
Text, Call either or!

Yes that air bag did not go off, thankfully or I would have probably been knocked out lol

Ehm...
My front bumper is destroyed, there is no way I think you would want a heavily scratched and ugly front OEM bumper lol.

It happened when the accident occurred -- the front hit the curb, flew off and got scrapes, dust from the road after landing and sliding on it.

This is one of the few parts of the entire vehicle that is probably no good xD

Does the sc kit have the carb sticker?

I lost the CARB sticker to be honest, but I can always get another one if needed, haha.
But it is CARB legal though.
The A2A kit is not however -- I don't have the original charge pipe that came with the Stillen Kit anymore ... gave that away to my mechanic who needed it for his car when I converted over to the A2A kit unfortunately x.X

I think he's asking about the blower casing. It should have a plate with the carb number stamped on it

More so of a joke because this is the direction I want to head in with my build when I return and I wouldn't want to keep you from parting out to fund whatever the next build will be. I would be interested in the whole car, but I also want to have a build that is my own. All that being said I appreciate the generosity of your offer but I don't want to tie up parts that someone else could use now or put a retainer on parts leaving you stuck with them for nearly 2 years while I do my deployment run up and in theater service. However if you don't sell everything, or you have things like the block, SC kit, supporting mods for the SC kit still lwft when I get back I will definitely be interested. Also if you have an Instagram account I could follow to see the car that would be awesome too.

Sent from my LG-H918 using Tapatalk

I'm interested in the differential and maybe the supercharger if you can get the carb sticker. I'm about an hour away from you

Sent from my ONEPLUS A3010 using Tapatalk

When you guys say say you are interested in the supercharger, does that mean the blower itself with internal upgrades and the bracket? Just the blower with internals? Blower and pulleys? Blower and topgunz a2a kit? Which exactly parts were you guys wanting so I know ? :D

I just called Stillen earlier today and they are sending me another CARB sticker xD

potentially interested in the supercharger too if smog isnt gonna be an issue, i'm also tuned by eugene :P

So here's the deal folks!

Up to date, I have 2 buyers ahead in line that are interested in the SC components.

This is what was agreed to.

$350 @ Stillen Manifold 6k miles
$1350 @ a2a kit @ 875 miles
$3300 v3 blower 928 upgraded + bracket
$600 ecu comes with bluetooth dongle, cable, & license ; paid $800 for tune, $300 for license, $300 for cable & blue tooth dongle
$300 all 3 pulleys + idler pulley on serp side to eliminate slip, and sc belt included on sc side
Supercharger oil x3 free of charge
-----------------------------------------------------------
Total: $5800*

The first guy who contacted me , I haven't heard back yet with this pricing but he may want it still at this pricing.

The 2nd guy who contacted me, he said he is willing to PayPal me the cash up front and come pick it up once I part it out (500 years from now cause insurance is taking forever to adjust the value of my car with all the 20k worth of aftermarket parts in the car receipts I gave him that he asked for)

For those interested:
Let me know if you are willing to pay this price or pay higher just to get me to sell it to you.

Otherwise I'll go in the order of people who told me they were interested and who also agree to the above pricing.

It's a very good deal folks (:

couple questions

1. is this everything needed to put the kit on a car and make it run?
2. is there an estimate of when it would be parted out?

Interested in your cam set up ! Im in Socal and can pick up

Yep. Everything is included.
However I believe the SC kit may be purchased by the 1st person who PM'd me about it and is willing to pay $5800 for it when it does get parted out.

I am going to call my Insurance company tomorrow and ask them if they have a rough time frame on when it would be ready to total out and when they would pay me out, and then I can buy it back lol.

After I buy it back I will have either a shop, or a mobile mechanic friend part it out for me so that I can have the buyer come pick it up himself after he sends the payment through paypal or he can even send it when he arrives, I don't mind either way.

After the SC components are sold, I will have the Engine left for sale who I have one person interested but is doing some number crunching to find out if he still wants it, if not, I will offer it to another person who said he needed a built VQ37 "high compression" which I hope means 11.0:1 ratio lol, otherwise I don't have something to offer him and will just offer it to others who may want the engine.

Was anyone else here interested in purchasing the engine?

The entire engine or you just meant you wanted part of the engine...? xD

I am looking to sell the engine as a whole ; including the heads, brand new timing belt that's already on there, injectors included, stillen manifold (can take off at buyers' request), ATI pulley already attached, etc.

The only things missing would be two pulleys from the serpentine belt which is easily found stock from websites that sell Z parts.

Those two pulleys are going to be pulled off as part of the SC components I am planning to sell

- Stillen 9 psi pulley
- Idler pulley (Unless the buyer doesn't need the idler pulley)

I'm sorry to see such an awesome build go!! Man to be honest the way some of these guys keep blowing these engines up you may as well just purchase one of their cars lol...glwts!!

Are you willing to sell the spark plugs separate?

I may have an extra set of 6 spark plugs lying around somewhere. Either that or I left it at my mechanics shop lol I forgot.

I accidentally ordered 12 total instead of 6.

If I find them I can sell them, as they have 0 miles on it and are fresh still.

I can even ship them out if needed since its lying around somewhere...will have to check

No promises!

Update

Hi everyone.

I am able to start parting out the car now.
I will be talking to different mechanics to see what the best value for the quality of work + support provided is, that way I can start parting out the car and selling the pieces to my lovely Z family!

As of right now, the following parts are either pending or already have a buyer for:

(1) $5800
- TopgunZ A2A kit (piping, BOV, intercooler, etc)
- Stillen Manifold
- ECU then it also comes with the fully paid tune (Blutooth Dongle & ECUtek Cable)
- V3 SCi blower w/ 928 internal upgrades
- Blower bracket
- 3.0" Vortech SC Pulley
- Stillen 9PSi pulley on serp side
- Idler pulley on serp side


Up for Grabs off the top of my head:
(1) Fully built IPP Engine using a closed deck RJM block, added VQ37 crank.
- Supports 850 - 1000 WHP
- New Timing Belt @ 850 miles attached
- New VVEL RH & LH @ 850 miles attached
- ATI Pulley 5.5" Street Crank @ 850 miles attached
- Gaskets were changed out for new ones @ 850 miles attached
- 1050x ID Injectors @ 850 miles (Plug & Play) attached
- Jim Wolf Technology(JWT) Exhaust Cams
- JWT High RPM Valve Spring
- JWT Valve Spring Shim
- JWT Extended Cam Sprocket Bolts
- JWT Cam Sprocket Bolt Washer
- JWT Rear Camshaft Bolt
- JWT Cam Bolt Seal - Copper

Retail Price of Motor: ~$14,000
Willing to Sell:: $9000 OBO
==========================================
(2) Quaife LSD w/ Pumpkin attached (Or not, up to you)
Retail Price of Quaife: ~$1250
Willing to Sell:: $800 OBO

===========================================
(3) Left & Right Front Headlights
Retail Price of Headlights: ???
Willing to Sell:: $300 each OBO

===========================================
(4) Front Steering Wheel (Comes with unused airbag)
Retail Price of Steering Wheel w/ Unused Airbag: ~$500
Willing to Sell:: $300 OBO

============================================
(5) KW V3 Coilovers @ 1k Miles
Retail Price of KW V3 Coilovers: ~$2200
Willing to Sell:: $1200 OBO

============================================
(6) Zeitronix E85 Sensor Kit (0 miles)
Retail Price:: ~$300
Willing to Sell:: $200 OBO

============================================
Specialty Z 4BAR Omni Sensor @ (875 miles)
Retail Price:: ~$150
Willing to Sell:: $100 OBO

============================================
2015 Automatic Transmission @ 41k Miles
Willing to Sell:: $300 OBO


*** Anything else you guys can think of that is stock from the 370z that is not listed, let me know and I can see if I can part it out for you ***

Thank you for stopping by!

As of 07/18/2018, 4:12 PM (PST) The following are reserved / claimed:

(1) KW V3
(2) Quaife LSD
(3) Omni Bar Sensor
(4) Supercharger SC Kit Components + A2A Topz Kit
(5) Red OEM Hood (rock chips on it due to DD)
(6) Potentially the passenger side headlight; need to find a buyer for the driver side if I am going to sell them separately; otherwise I will only sell them as a pair.

GOOD NEWS & BAD NEWS FOLKS
-----------------------------------------------------
Good news: Insurance called me and said they increased the value of the car by 3k due to finding out how many miles is on the car. They had forgotten to factor that in, so now the entire value of the car increased to 23.4k versus the initial estimate of 20.4k.

Bad News: I am highly likely going to cancel all reservations on the aftermarket parts and keep the car, transfer it all the a different body Z and continue on with my journey to 700 whp as originally planned. I just can't do anything stupid or risky again or this will happen again. (IE: Put different tires on front and back with a huge size difference + go boost = caused my accident in the first place)

I hope you guys are happy for me, it's really great news for me.
After all is said and done (refunds from A, B, C etc.) I come out on top of about +600 dollars, whole car is paid off, and I get to keep the car (after buy back price and still on top with 600)

Just waiting for insurance to give the green light.

Please don't flame me for this T_T

Congrats!

Thanks man.

:) I'm extremely happy!!

No flaming but, I do think this is worthy of a
:facepalm:

lol.
Did I make a bad choice though?
In your opinion?
Or was that remote for other reasons?

I'd love any feedback constructive feedback!

It's all good, bro. You do what's right for you.

>_> makes me think I am overlooking something :/

No, I'm not alluding that at all.

Alright I trust you, I do feel better now :D
Thanks for supporting me man

just lmk about those spark plugs!