Bunch of Stuff: Varis, Litespeed, etc. Locals First
 

Hi guys,
I've been super busy as of late and finally have the chance to put all of my stuff up for sale.
I took these pictures a while back, and if needed to I can take more updated photos of stuff tomorrow
Local sales first then later I will contemplate shipping
I'm pretty firm on pricing, but I'll still be open to offers. Just don't low ball me.
http://www.the370z.com/members/rsun9...40-overall.jpg

Varis Carbon Hood: $1400
That's including a $300 clear coat job and no 4 month wait to have it made and shipped over. There is a tiny tiny little knick in the clear coat probably from a rock. I will take pictures of it tomorrow. I had this on for a little over 4 months and have receipts to show for it. I had to rent a U-haul to move this thing around so you'll have to come to me if you decide to buy it
http://www.the370z.com/members/rsun9...varis-hood.jpg
http://www.the370z.com/members/rsun9...varis-hood.jpg

Litespeed full titanium exhaust+y-pipe: 1800
Y-pie is pretty scratched up, but its fine. I had the exhaust fixed up about a year ago and the welds are holding strong. I had it done through a guy who was capable of working with titanium. Here's a few pics and its a pretty good job considering I've seen some pictures of a horribly fixed Amuse exhaust a while back. I can post more detailed pics if needed. Vid of throttle blipping is below
http://www.the370z.com/members/rsun9...d-titanium.jpg
http://www.the370z.com/members/rsun9...d-titanium.jpg
http://www.the370z.com/members/rsun9...d-titanium.jpg


Berk HFC: ~ sold to CM370
Had these on for about 6k miles
http://www.the370z.com/members/rsun9...7-berk-hfc.jpg

BC BR coils + swift springs: ~sold to mike370
I probably had these on for about 9k miles left or right
http://www.the370z.com/members/rsun9...r-w-swifts.jpg

SPL upper control arms: ~sold to BeemaaZ
Put on at the same time as the coils
http://www.the370z.com/members/rsun9...er-control.jpg

SPL rear camber + toe bolts: $200
Put on at the same time as the coils
http://www.the370z.com/members/rsun9...ear-camber.jpg
http://www.the370z.com/members/rsun9...-toe-bolts.jpg

Swift Spec-R springs: ~sold to WigglyTurtle
These probably have around 6k miles. Took them off when I put the coils on just was too lazy to post these up for sale
http://www.the370z.com/members/rsun9...-r-springs.jpg

Stillen CAI: ~sold to Iamdoch
Not sure how long they've been on
http://www.the370z.com/members/rsun9...e93230-g3s.jpg
http://www.the370z.com/members/rsun9...e93229-g3s.jpg

Tomei Y-Pipe still available
Tomei cat-back section ~ sold to 6mt370
Barely even used as you can see on the Y-pipe. I was able to fit this exhaust without any modification, but it hung pretty low. As a results it's scraped up at one point. Then somewhere down the line I ran over a paint can and it got covered in black s***. You can probably take it off with acetone, but I just never bothered to do it.
If I had to seperate the two items it would be: 500 for the y-pipe and 300 for the exhaust.
When I visited Tomei USA's office they said they sell replacement parts so you could go that route if cleaning it doesn't work.
http://www.the370z.com/members/rsun9...ack-y-pipe.jpg
http://www.the370z.com/members/rsun9...243-damage.jpg

Stillen 19 row thermostatic oil cooler: ~ Gone to abdulisraddd
Free you say? What's the catch?
Well, my lazy a** didn't clean it when I took it off a while back. So It's pretty dirty. Plus some other reasons not regarding the condition its in. If you wanna know why just pm me.

Again all sales are local first and then I'll contemplate shipping later. I don't have a mode of transporting the hood so you'll have to come to me to pick it up. All other items, I'm willing to meet up as long as its not too far from Irvine, CA.

Additional pics can be provided upon request.
I will try to answer all questions as best as possible.
Also, I will have a set of BC forged HB29 wheels going up for sale soon so keep an eye on that.
If there are grammatical or spelling errors, I apologize since this was done so hastily.

PHEW... made it through the onslaught of pm's

So here's a list I made of people that have priority just for transparency sake. I made this as fast as I could so I apologize in advance if I made some mistakes

Varis Hood:TerribleONE, BeemaaZ, FLY1
SPL control arms: Sold
SPL camber+toe bolts:
HFC: Sold
CAI: Sold
Tomei catback: Sold
Swift Spec-R: Sold
oilcooler: gone
Coilovers: Sold
Tomei y-pipe:
Litespeed titanium y-pipe + catback :

Iamdoch has dibs on a couple other stuff, I'll confirm with him in a bit
I made this list in order of PM's received and I will continue to edit/add onto the list as time goes on.
If you are first on this list and haven't received a pm or reply from me, pm me your number.

I'll take the oil cooler


Sent from my iPhone using Tapatalk

PM'd

pm'd

PMed!!

Pmed


Sent from my iPhone using Tapatalk

PMed

PM sent on the hood.

Phone number to contact?

Nice parts. I have the stainless Litespeed and have been wanting to Titanium version for a while. Willing to sell just the Y-back section?

Interested in CAI PLEASE PM!

Holy crap! my pm box exploded.
I will reply in the order I received them

Okay, so for those inquiring about the hood being shipped, I'm sorry, but its going to be highly unlikely. I talked to John at corner3 last time and he said from experience it would cost something rediculous like 300 to ship it, because we would have to build a crate to protect it properly + shipping cost. Also, I really don't want to run the chance of damaging it. It's too beautiful.
continuing to answer pm's...

PM'd !!!

pm'd

Phone number????

Not as of now.
The exhaust really sounds a lot better with everything together.

pics of the tomei exhaust on the car? wanted to know/see if it hung lower than the z34 version. PM me, thanks!

Please look at the second post, I made a list

IF YOU ARE FIRST ON THE LIST AND WANT YOUR PARTS BY TONIGHT PLEASE PM ME YOUR NUMBER OR POST SOMETHING
All the parts are in the warehouse where I work, so I have to get them before I leave. The only exception being the Tomei stuff because those are at my house.

good deal on that hood, too bad it's such a hassle shipping the thing for prospective buyers

Pm with contact


Sent from my iPhone using Tapatalk

Some pics of the Hood
http://www.the370z.com/members/rsun9...tiny-knick.jpg
http://www.the370z.com/members/rsun9...3276-front.jpg
http://www.the370z.com/members/rsun9...e93279-tag.jpg
As you can is it's a tiny tiny tiny little knick in the clear coat

Oh and just kidding about the oil cooler being filthy. Opened it up and took a look at it its fine, but I'm a man of my word and it is still FREE
http://www.the370z.com/members/rsun9...oil-cooler.jpg

Waiting for contact info
Tiphat


Sent from my iPhone using Tapatalk

replied

Thanks


Sent from my iPhone using Tapatalk

As promise, here's a vid of the exhaust throttle blipping

Its pretty loud and from the distance I was standing at, it WILL hurt your ears if revved harder

Great seller! Buy with confidence

Thanks for the kind words Bima!

Oil cooler still available?

Sent from my SM-G930T using Tapatalk

egboy last chance to contact me. Otherwise TerribleONE will have his chance.

RSUN91 is a awsome seller! I drove down from northridge CA to pick up th oil cooler last night. This guy is awsome, Thanks again!

Litespeed exhaust still up for grabs!

I will take the stillen intake off your hands. Shipping to 34286 . Text me 6307764786

Sorry sold the intakes

That hood is sooo nice .. Good luck with sale! Free bump


Sent from my iPhone using Tapatalk

Thanks for the kind words!
I'm willing to ship the rest now except for the hood

What if someone arranges for the hood to be picked up?!


Sent from my iPhone using Tapatalk

Hood is already sold.. ;)