[Feeler] GTM Stage 1.5 Supercharger Kit
I recently got in to an accident with my Z and early indications are that it´s totaled.
If it does get totaled, my current plan is to go buy a new Nismo as soon as I cash out. Since it will be new and under warranty I won't be looking to go forced induction any time soon. The reason this is a feeler is because I am not 100% sure about it an may get a used Z and go beast mode on it right off the bat. However, I prefer to sell it and put the money towards the new Z. The kit has about 2K miles on it. Check out my build thread and you will see it was installed only a few weeks back. It made a trip to Maryland to be tuned, and a trip out to ZdayZ. The kit made 423whp on my car, with an undiscovered boost leak. My plan was to go back to AAM to have it retuned after ZdayZ. The kit is complete with the exception of the 255lph pump and the bracket for the S/C cooler. Kit used to go for $7500 or so. I am looking to get $5k shipped+paypal fees. Kit includes: Below is a description of all the components of the Stage 1.5 kit : -Uprev Cable and License. -Rotrex C38 supercharger -GTM compressor housing -GTM Supercharger Billet aluminum brackets -GTM billet aluminum Sc pulley -GTM supercharger cooler kit -Rotrex Supercharger Traction fluid -4-Ply High Resistance Nomex Silicon couplers -Stainless Steel T-Bolt clamps -2.5 x 10 x 24 Bar and Plate Core Intercooler Rated @ 700hp -Polished aluminum IC Piping -3” MAF housing -GTM Oil Filter Relocation Kit -4.5” diameter Air Intake System -Turbosmart Bypass Valve -Pre-made steel braided oil and P.S Supply & Return lines -All Necessary Hardware and Installation Instructions -GTM Basic fuel system with Bosch EV-14 650CC Injectors -GTM Fuel Pump Voltage Stabilizer Kit -GTM Custom Drive belt By Bando -GTM Heavy duty Belt idlers Let me know. Cheers! |
damn you! why didnt you post this up sooner lol
|
This is a dyno sheet from another member Baer383. HP expectations for this kit should be in the 500+whp range. I had several small boost leaks when I had mine on the dyno and that limited me to 7.5-8psi. So I have no doubt it was getting closer to this HP after fixing them, it as a noticeable gain in power, but never got a chance to get her back on the dyno.
http://www.the370z.com/members/baer3...td-numbers.jpg |
How would one go about getting another bracket for the cooler, or is it pretty easy to fab up?
|
you could attempt to contact gamma. i've had mixed results with them. mostly it's hard to get a hold of them period. they are generally helpful once you get them though.
the bracket itself should be easy to make. it is basically a flat plat plate. if you are handy with fabbing should be a doable or any shop would be able to make one for you. edit: i uploaded the manual to my dropbox. you can see the bracket on page 78. Stage 1.5 Installation Manual |
Bracket is easy to fab.
|
bump for good deal imo
|
Send me some pics if you could 507-273-2035
|
I'd love this so much
|
If your buyer needs the base tune I can help with that!
|
Quote:
|
You wouldn't be willing to donate this to my poor *** would you?
<3 |
Can you please PM me your phone number?
Sent from my iPhone using Tapatalk |
Quote:
|
Quote:
I did pm him. I just posted here also in case he will not see the pm. Who need the facts when you are a know it all. |
Quote:
|
Quote:
|
I am very interested in the kit!
Can you PM me ? |
Hi all,
I responded to all the PMs. I will come to a final decision by end of week once I have a better idea of what my next step is with the car. I will do my best to respect "dibs" order. Just to make it easier for those who don't love to forum. I can be reached by text at 9one9.9eight5.0603. You can call, and if the breeze is blowing in the right direction and I happen not to be in a meeting I will try to pick up. However, I can generally get a text out. |
Quote:
|
All times are GMT -5. The time now is 08:46 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2