ARK High flows jacksonville, nc
 

Bought brand new ARK High flows and on't need the them since I'm going forced induction. So anyways, I'm in Jacksonville north carolina and they're for sale in that area. 600 bucks.

Sent from my SAMSUNG-SM-G900A using Tapatalk

got any pictures to post?
may be interested.

Haha, they're so new I haven't even gotten them yet. They get here monday

Sent from my SAMSUNG-SM-G900A using Tapatalk

Ohh haha sounds good! Have a good weekend and post up when you can my friend!

Will do

Sent from my SAMSUNG-SM-G900A using Tapatalk

I might also be interested if you don't mind posting some pictures! thanks. Also, are you willing to ship? I'm located in Jacksonville,FL.

I actually drive through there on my way home from base, in the next couple weeks, if you're serious about buying

Sent from my SAMSUNG-SM-G900A using Tapatalk

Sounds great, I just need to see some pictures when you get a chance to post please.

http://images.tapatalk-cdn.com/15/08...2e2b70e002.jpg

Sent from my SAMSUNG-SM-G900A using Tapatalk

Nvm I miss understood the post, I thought you were selling an exhaust with the cats as well. I'll keep you posted, Thanks for the pictures buddy.

http://images.tapatalk-cdn.com/15/08...93d4be0a4e.jpg

The right one sits perfectly, the left one hits the bumper and is slowly melting it

Sent from my SAMSUNG-SM-G900A using Tapatalk

Stack some washers on the rear hanger and you should be good.

Doesn't work that way

Sent from my SAMSUNG-SM-G900A using Tapatalk

So I'm a bit confused, are you selling the exhaust with the HFC? or just the HFC

Just the hfc

Sent from my SAMSUNG-SM-G900A using Tapatalk

because?

http://images.tapatalk-cdn.com/15/08...e9ae1829fd.jpghttp://images.tapatalk-cdn.com/15/08...2f0416f4e8.jpg

The hinge it hangs on is front to back, not left to right

Sent from my SAMSUNG-SM-G900A using Tapatalk

At the bottom right of the picture there are three bolts holding the rubber hanger to car. I have this exhaust and the DT-s version. Trust me, get under your car, remove those three bolts, stack some washers on the bolts and put it back on. This will essentially create enough spacing to get your muffler tips off of the bumper.

You're right, but I was trying to push the exhaust to the right so that it would sit centered. I guess I'll have to do the washer thing

Sent from my SAMSUNG-SM-G900A using Tapatalk

You can adjust it but it will never be perfectly centered. I spent quite a bit of time twisting and turning the muffler to adjust mine and got it close to matching the other side but it's still off a little bit. Just the way it is.

Don't get me wrong, I know that cars all have minor defects or slight variances between each individual car. But I can't help but feel like this should be a non-issue...

Sent from my SAMSUNG-SM-G900A using Tapatalk

this happened to me b4, it's hard to explain but I just loosened the bolts and readjusted it so it wouldnt touch it! its better to have a second person give u a hand. after youve adjusted it just tighten the bolts again!

Yea, I'll definately do it just because I don't want the bumper melting apart

Sent from my SAMSUNG-SM-G900A using Tapatalk

beautiful parts GLWS!

you dont want to ship?

I was trying to keep it local, but it seems I'm going to have to ship at buyers expense

Sent from my SAMSUNG-SM-G900A using Tapatalk

these sold?

No

Sent from my SAMSUNG-SM-G900A using Tapatalk

This product is top notch! Worth the price!

Buy it!

Took me 3 days and a lot of finessing to get my ARK all lined up its a pain but it can be done

Yea, pain in the ***

Sent from my SAMSUNG-SM-G900A using Tapatalk

ARK is easy to line up guys. Mine was not lining up the first time cause the piping were not correctly bolted. I went though EXACTLY the SAME thins as some of your guys lol. There are those two end pipes which can easily be bolted right to left and wise versa. They look very similar and seems like there is no difference between them, but there actually is.
I swapped them in the right position and the exhaust aligned right up where it needs to be.

Took me about two hours to put mine on the Z. I need to help one of my friend here with them as well, cause an exhaust shop miss-swapped the piping incorrectly. lol

Here's mine all aligned properly with ease. No adjustment was needed if those pipes highlighted in red are not miss swapped. I wish ARK could label left and right side so we didn't have to go though this.

http://i8.photobucket.com/albums/a22...pso7znxswt.jpg

http://i8.photobucket.com/albums/a22...psclexmwl2.jpg

Well fck me! That makes a lot of sense now. I'm going to try swapping those pipes over, hopefully I can get it to look like yours. Thanks for sharing!

yeahh no problem. Just read that some people are experiencing the problem which I easily solved, so I had to share.

.