SQUARE 19x10 ‘09-‘12 370Z OEM Forged Ray’s Sport wheels
 

Sold!

I have for sale a set of 4 square rear 19”x10” OEM forged wheels from the 2009-2012 model 370Z Sport package made by Ray’s Engineering. I came upon this set when I bought 2 sets of these wheels from this forum from users ‘1st’ and ‘edzilla123’ to put together an all 9” front set for my ’14 Altima.

Wheel specs:

• Size: 19x10
• Bolt Pattern: 5x114.3
• Offset: +30
• Weight: 23.8 lbs

http://i482.photobucket.com/albums/r...pssfzw3wlj.jpg

http://i482.photobucket.com/albums/r...psqf4uxnmm.jpg

Overall these are in great condition with no curb rash. The finish on each wheel is holding up well with no major problems, they are however used wheels that are several years old and have nicks here and there as should be expected. All of the wheels have been cleaned and inspected by me once I received them, with a fresh coat of wheel wax applied. I've done my best to accurately describe the condition and taken pictures of anything that I could get to show on my DSLR using my admittedly sub par camera skills. :tiphat:

These are ready for a new owner to enjoy them! They will be boxed in the Varrstoen boxes they were shipped to me in with the faces bubble wrapped, then double boxed, 2 per larger box.

Wheel 1: Nick on outer rim face as shown in 2nd pic.
http://i482.photobucket.com/albums/r...pshxp3veht.jpg

http://i482.photobucket.com/albums/r...psqwrmaz3f.jpg

Wheel 2: - Small gouge on rim shown in 2nd pic. Light wear/fine scratches on face of spoke shown in pic 3 and 4.
http://i482.photobucket.com/albums/r...psx3adovwk.jpg

http://i482.photobucket.com/albums/r...pswjyfaamj.jpg

http://i482.photobucket.com/albums/r...pswwdfflhv.jpg

http://i482.photobucket.com/albums/r...pse6lp8j5n.jpg

Wheel 3: Scrape on outer wheel shown in pic 2, appears to be from being sat face down (not deep), small scrape on wheel face shown in pic 3.
http://i482.photobucket.com/albums/r...pssxjgzddz.jpg

http://i482.photobucket.com/albums/r...psjamzpntc.jpg

http://i482.photobucket.com/albums/r...pshgf7f6f5.jpg

Wheel 4: No notable issues
http://i482.photobucket.com/albums/r...psdgz9odad.jpg


Asking price: $1000 + Shipping + PayPal

There are a few pictures not posted here in my Photobucket gallery.

Hmm... Has anyone run a square 19x10 stock Rays setup on a 370Z yet? I'm not looking to be the guinea pig, I'm just curious. GLWS!

I'm told the answer is yes, many times. Here's one example I was given.

19 inch square setup

Trusted Seller! Buy with confidence!

Plenty of people have run square. GLWS OP :tiphat:

What made you go with the 9 instead of the 10?

A 10" +30 wheel won't fit our car (Altima), if it did I would certainly run it as it's even more concave and looks awesome. 9" +47 is fairly aggressive as is for us. It might be possible with a tiny stretched tire or tons of negative camber, but I'm going to run a 245/40/19 and don't want to run a ridiculous amount of negative camber for it to "fit".

Proof

Bump, wheels are still available.

http://i482.photobucket.com/albums/r...psuxfvon1k.jpg

Yes, it is a nice setup. You'll have a little poke at the front.

Pending sale

Good to hear it all worked out.