Nissan 370Z Forum - Need Help? Let me know!

Nissan 370Z Forum (http://www.the370z.com/)

- North East Region (http://www.the370z.com/north-east-region/)

- - Need Help? Let me know! (http://www.the370z.com/north-east-region/5937-need-help-let-me-know.html)

All new speaker wire was ran to the speakers and to the new tweeters. The original plan was to build up a mount with wood and bondo the tweeters into the sides of the doors. "might still do" but we will first test the system with the stock locations and see how it sounds and go from there. It would look slick and would probably give him better imaging. As I said still up in the air. Tomorrow I will be working on the fuse mount for the crv and painting that. Than Friday we will get back together install the amp either under the seat or in another location. As we have said we are not sure what we are going to do about the sub yet but it will probably be a custom box build. Which I will look forward to. Other minor things will be remounting the blu tooth mic. the sad part about this is that the pioneer is already producing a low wine noise "always with pioneers" so I will probably ground the rca's and change the ground point see if that helps. Might be changing the head unit but that is up to Adam and what the turnout is. It is going to turn out to be a good setup.

Did the fuse block bracket
http://i483.photobucket.com/albums/r...c/100_1626.jpg

Fuse mount looks good. Up here in North Jersey, I continued with Dynamat. Today, I think it was seven sheets in the trunk. Here are some pics before and after.

Tomorrow, big things happening. PDX-5 amp which was finally delivered being installed, dynamat to the floors/liftgate, mount the crossovers, bluetooth mic, put everything back together again the ... yeah, listen to and tune it.

http://i1021.photobucket.com/albums/...231-150631.jpg

http://i1021.photobucket.com/albums/...231-150523.jpg

http://i1021.photobucket.com/albums/...231-150435.jpg

http://i1021.photobucket.com/albums/...231-145107.jpg

http://i1021.photobucket.com/albums/...231-145103.jpg

http://i1021.photobucket.com/albums/...231-183401.jpg

http://i1021.photobucket.com/albums/...231-183407.jpg

http://i1021.photobucket.com/albums/...231-183416.jpg

http://i1021.photobucket.com/albums/...231-183427.jpg

http://i1021.photobucket.com/albums/...231-183450.jpg

Drove down yesterday to continue work with Matt (after spending the day before putting in my trunk Dynamat, as shown above). Wrapped up everything nicely - Dynamat to the floors, amp installed, custom fuse bracket and sheet metal bluetooth mic bracket installed. The Alpine PDX-5 is awesome - so small and the verification sheet from the factory - well, a pic is below; obviously they severely underrate the powerhandling ability of them. I'll let Matt fill in any details from yesterday i'm forgetting. Again, can't recommend working with him highly enough. Learned a lot yesterday and his attention to detail is very significant.

http://i1021.photobucket.com/albums/...101-091417.jpg

http://i1021.photobucket.com/albums/...101-091428.jpg

http://i1021.photobucket.com/albums/...101-094659.jpg

http://i1021.photobucket.com/albums/...101-102219.jpg

http://i1021.photobucket.com/albums/...101-111424.jpg

http://i1021.photobucket.com/albums/...101-111431.jpg

http://i1021.photobucket.com/albums/...101-122019.jpg

http://i1021.photobucket.com/albums/...101-122025.jpg

http://i1021.photobucket.com/albums/...101-122031.jpg

http://i1021.photobucket.com/albums/...101-124852.jpg

Should have a website up soon!

i was wondering if a 6.5 inch sub would fit in the rear speaker opening for the 370z? it would seem kinda cool to pull off and would save trunk space

No not only are the spaces only made for 3.5 inch speakers but it would be poor placement as well.

Rear fog light :the best way to connect power is in the ingition ? will it affect the lights at all? no fuse or resistor needed?

Worked on another car yesterday. This one I got involved in working with bondo. I am still working on the pods and going to get paint soon for them but I do not think they came out bad for a first time.

0 Gauge ran
http://i483.photobucket.com/albums/r...c/100_1646.jpg

http://i483.photobucket.com/albums/r...c/100_1645.jpg

http://i483.photobucket.com/albums/r...c/100_1642.jpg

http://i483.photobucket.com/albums/r...c/100_1641.jpg

http://i483.photobucket.com/albums/r...c/100_1640.jpg

http://i483.photobucket.com/albums/r...c/100_1643.jpg

Should have more pics up soon.

Hey Matt,
How much does it cost to install a Kenwood 6140, including steering wheel wiring, for a 370z? I have a factory radio, no navigation, no Bose.