AC seats switches
 

Hello my roadster peeps. I recently bought a pair of roadster seats for my Nismo. I got the everything working (power seats, cooling and heating).

Unfortunately there is no existing harness for them so I had to go by the service manual and wire it all up. I now have 4 red wires left over from the temp control knobs/switches. 2 from driver side switch and 2 from the passenger side switch. They are terminals 7 and 8 on the connectors and I couldn't figure out where those go. I'm thinking it's just power for lighting the LEDs up but I couldn't find anything on the FSM.

Can someone let me know if the little picture of the seats and the blue and red temp indicators on the knobs are supposed to light up?

I hate you

Haha. Here's a pic of the cables I am talking about in case somebody knows what they are.

http://i108.photobucket.com/albums/n...ps1aivcrhy.jpg

I want pics of how the seat looks and fits in the coupe you bastard

They are about 2in taller than the coupe seats so getting them in was a little tricky, specially since you can't recline them without power. I'll take some pics tomorrow. They look pretty cool.

No cold and hot illumination, but the picture and knob do

Sent from my SM-N900T using Tapatalk

Thanks a lot, that really helps!

Np

Sent from my SM-N900T using Tapatalk

Found them on the FSM, terminals 7 and 8 are indeed for illumination.

http://i108.photobucket.com/albums/n...ps6f31f3e1.png

:iagree:

Is there a full write up for this anywhere?