DIY Roadster Spoiler Install with Pics
 

I finally installed my roadster spoiler this past weekend, and thought it would be great to share my experience. I have been waiting and searching for a spoiler. I finally settled with roadster spoiler from spoiler solution because of its OEM look. Please note that this is my very first DIY write up...:tiphat:

Background about myself:

I am not a mechanic, and my tools are very limited. I am a dentist, and my 370Z is my toy car which I use to learn how to work on cars. I have done most of the mod myself. Even though most DIY here on the forum gives approximate time for the project to finish, I usually take at least two to three times longer. Anyways, my point is if I can do it, you all can do it.

Tools:

1. 1/8 and 5/16 drill bits
2. Uni bit
3. Silicon adhesive.
4. Cordless Drill
5. Masking tapes
6. 2-3 friends
7. some Guts to drill through the trunk.

Procedures:

Before I start, I removed the trunk liner to expose bare metal.

1. I first taped up the rear part of the trunk completely so I can measure and align the spoiler. It not only protect the paint, but I get to make different marks and drawings to re-assure the position of the spoiler.

Attachment 83130

2. Test fitting the spoiler, making sure the spoiler is on the dead center of the car.

Attachment 83131

3. Since I will be taking the spoiler on and off, I want to make sure I got the spoiler to the exact same spot each time after I remove it. I placed a small tape on the spoiler and draw a line through at different parts of the spoiler for alignment purposes.

Attachment 83132

4. Put the alignment tab on the holes I picked, and place the spoiler back on the trunk. I used the top 4 holes because I feel that it will provide better stability. Re-measure again and taped the alignment tab onto the trunk.

Attachment 83133

5. Remove the spoiler, leaving the alignment tab on the trunk. It took me several tries just to do this step because some alignment tab just won't stay put. Patient is the key!

Attachment 83134

6. Finally drilled the holes... There is no turning back! Even though I am a dentist, and I am pretty good at drilling because that is what I do every day, drilling through my trunk however took a lot of courage. First I used 1/8 pilot drill, then moved to 5/16. I drilled through the double panel of the trunk so I know where to open the access hole from the inner trunk. I then used touch up paint to cover the exposed metal. For the inner trunk, I used a unibit to open up the hole that is large enough for my 1/4 socket to go through.

Attachment 83135

7. I used silicon adhesive around the holes and I also put a bead of silicon within the spoiler weather seal. With help of 2 other men, I fasten all 4 screws and secured the spoiler.

Attachment 83136

8. Wiped all the excess silicon off the trunk, and enjoy the spoiler...

Attachment 83137

Special thanks to Bummer, who helped me a lot through PM and answer all of my questions. Without his help, I would not have made it through. After I received the spoiler, I noticed that the spoiler doesn't fit perfectly. There are bigger gaps between the far right pillar and the trunk than the left. The spoiler is not perfect fit but it is close enough that no one else would notice.

You're very welcome. I'm glad I could be of help.

I'm pretty sure #7 on your tools list is the most difficult thing to find.

Looks great. With your color I can't imagine anyone will notice the slightly uneven gap. My car is Solid Red, and while several people at the Dealer commented on how good the spoiler looks, nobody, including the mechanic, noticed. I see it, but that's just because I did the installation, and I only notice when the trunk's open.

Looks good. I have a '12 MB ZR, too. I want a lip spoiler versus a wing - but this looks great. Where did you get the diffuser? I Just put on my Stillen sides two weeks ago as well. they stick out so much i hit them every time i get in and out...lol

More pics...like profile?

Nice write up. I've been thinking of getting one myself, just a little worried that I would put it on crooked...

Good DIY! I am swapping spoilers from sport to Seibon NS so I will use this as my reference thread when I drill the new hole locations! Cheers! :tup:

Hey.. my twin from S. Cali! I got my rear diffuser a while back from Evo-R. Like many others, I had some fitment issue. However, it is not that noticeable until you look at it closely because my car is black.

As for side blade. That is also from Evo-R. I also have the front lip from Evo-R as well. Front lip fits pretty well. Side blade is fine but I can't really use my low profile jack unless I drive up to some 2x4 because the car is too low to put a jack under it. I kick my side blade once in a while, but no biggy...:-)

It seems like your headlight is also painted... mine is painted as well, and it also took me some crazy guts to open it up myself...:-)

Not to steal Neoatw's thunder, but there are a couple of pics in one of my albums that show the spoiler in Solid Red, making it a bit easier to see than in a darker color. No absolute silhouette (kind of boring photographically) but close.

Nissan 370Z Forum - Bummer's Album: My new Z - Picture

and

Nissan 370Z Forum - Bummer's Album: My new Z - Picture

in particular.

Nice job looks great!

Got any more pictures, from the side?

Well, no, not really. These are pretty much it. I really don't do just simple profiles. Gotta be low, and with at least some angle.

However, I'm heading out to the car wash and will take some profiles once it's cleaned up.

Here you go... Hope these will help Str8

Attachment 83274

Attachment 83275

Nice. How about a full profile? Top up or down? thx

At the car wash... (Do you hear it?)

Neoatw, for a profile, the black may well do a better job of standing out against the background.

Nice Bummer...but can we see the black? lol

Neo, you're up buddy. I'm all out. (It's a tough crowd. ;))

All right... If I must...:-) Crappy Iphone pic outside of my office.

Attachment 83315

Attachment 83316

Do you know how to remove the spoiler?

I can't seem to find the other two bolts under the lining... I've only found the two nuts ...

Thanks Neoatw!

Spoiler ?
 

Am I crazy ? That looks like a one piece trunk lid/spoiler. Not. DIY ? Best I have ever seen. Tell me more!
Thanks
Chuck

Use fishing line to saw between the body and the spoiler. That'll cut the sealer and help you find phantom screws.

PM response coming your way.

Short version: Spoiler Solutions on Ebay.

Roadster Spoiler
 

I went to the Spoiler Solutions site (no phone number, no city, email only.) And to the Wing Tech site (there is a ph # and lists The Woodlands, TX PO Box. The sites are very similar. Makes me wonder?? So, I sent them both an email.
Thanks,

Purchased mine from Metroplex last year. DIY contributed to in Roadster section. $314 shipped but have seen better deals since. Love the look.

Nice job...been on the fence about installing my spoiler myself.

It's really not hard. Study the instructions, theirs and the ones on here, first. Then just measure/fit two or three times, and drill once.

Actually installed it today with assistance from the wife.Attachment 92229

For those who bought the Spoiler Solutions spoiler on ebay, was the turnaround/delivery time accurate listed on the auction page? Seems like rather quick shipping estimate for a painted spoiler, unless they actually keep a stock on hand of all the Nissan stock colors.

I've sent them that same question thru Ebay, but curious the experience of those here in this thread. Thanks for all the pics too, BTW...beautiful Roadsters abound in this thread! :tup:

I actually got mine before estimated shipping date. Took about 4 days tops after I placed the order.

I just put the NISMO front spoiler on and like it. I'm on the fence, trying to figure out which rear spoiler to go with (if at all).

Very Good Instructions - Thanks...:tiphat: